Synthesis of naturally occurring bioactive butyrolactones: maculalactones A-C and nostoclide I

Starting from citraconic anhydride (13), a simple multistep (9-10 steps) synthesis of naturally occurring butyrolactones maculalactone A (3), maculalactone B (1), maculalactone C (2) and nostoclide I (4) have been described with good overall yields via dibenzylmaleic anhydride (20) and benzylisopropylmaleic anhydride (27). The two anhydrides 20 and 27 were prepared by S_N2′ coupling reactions of appropriate Grignard reagents with dimethyl bromomethylfumarate (14), LiOH-induced hydrolysis of esters to acids, bromination of carbon-carbon double bond, in situ dehydration followed by dehydrobromination and chemoselective allylic substitution of bromoatom in disubstituted anhydrides 19 and 26 with appropriate Grignard reagents. The NaBH₄ reduction of these anhydrides 20 and 27 furnished the desired lactones 21 and 29, respectively. The lactone 21 on Knoevenagel condensation with benzaldehyde, furnished maculalactone B (1), which on isomerization gave maculalactone C (2). Selective catalytic hydrogenation of 1 gave maculalactone A (3). The conversion of lactone 29 to nostoclide I (4) is known.     

Sequential injection system with higher dimensional electrochemical sensor signals Part 1. Voltammetric e-tongue for the determination of oxidizable compounds

A sequential injection analysis (SIA) system was developed with the aim of obtaining an automatic and versatile way to prepare standards needed in the study of systems with higher dimensional sensor signals. To illustrate this, different analytical techniques were used in determinations of several analytes. Automated potentiometric calibrations of different potentiometric sensors, with and without interference, were carried out. Useful determinations of selectivity coefficients with two degrees of freedom were obtained. Simultaneous voltammetric determinations have also been done. Firstly, simultaneous determinations of lead and cadmium, using epoxy-graphite composite as the working electrode, have enabled a separate calibration for each metal to be obtained. Next, a voltammetric electronic tongue was designed and applied to the determination of oxidizable species. The use of artificial neural networks has solved the overlapped signal of ascorbic acid, 4-aminophenol and 4-acetamidophenol (paracetamol). A set of 63 data points was prepared automatically and has facilitated the training of an electronic tongue for these three analytes. Accurate predictions of test solutions, in the range of 12–410 μM for ascorbic acid, 17–530 μM for 4-aminophenol and 10–420 μM for paracetamol, have been achieved with RMSEs lower than 0.10 μM.     

Stereoselective total synthesis of (S)-Virol C and (S)-1-dehydroxyvirol A

A stereoselective total synthesis of (S)-Virol C and (S)-1-dehydroxyvirol A has been developed, based upon the selective and sequential substitution of the two trimethylsilyl groups of readily available 1,4-bis(trimethylsilyl)-1,3-butadiyne.     

Voltammetric Study of Nitro Radical Anion Generated from Some Nitrofuran Compounds of Pharmacological Significance

The electrochemical behavior of 2‐(5‐amino‐ 1,3,4‐oxadiazolyl)‐5‐nitrofuran (NF359) and its comparison with well‐known drugs such as nifurtimox (NFX) and nitrofurazone (NFZ) in protic, mixed and aprotic media by cyclic voltammetry, tast and differential pulse polarography was studied. All the compounds were electrochemically reducible in all media being the reduction of the nitrofuran group the main voltammetric signal. The one‐electron reduction couple due to the nitro radical anion formation was visualized in mixed (for NF359 and NFZ) and aprotic media (for all compounds). By applying a cyclic voltammetric methodology we have calculated the decay constants (k₂) of the corresponding nitro radical anions in mixed and aprotic media. In mixed medium data fit well with a disproportionation reaction of the nitro radical anion but in aprotic medium fit better with a dimerization reaction. Also, considering cyclic voltammetric measurements in aprotic media we have estimated the reduction potential of the RNO₂/RNO₂^.? couple in aqueous medium, pH 7 (E¹₇ values) finding very good correlation with E¹₇ values obtained by pulse radiolysis. Furthermore we have calculated the equilibrium constants from the electron transfer from nitro radical anion to oxygen (k_O2) finding that nitro radical anion from NF359 is thermodynamically favored to react with oxygen in respect to both NFZ and NFX.     

Voltammetric determination of L-dopa using an electrode modified with trinuclear ruthenium ammine complex (Ru-red) supported on Y-type zeolite

The L-dopa is the immediate precursor of the neurotransmitter dopamine. Unlike dopamine, L-dopa easily enters the central nervous system and is used in the treatment of Parkinson’s disease. A sensitive and selective method is presented for the voltammetric determination of L-dopa in pharmaceutical formulations using a carbon paste electrode modified with trinuclear ruthenium ammine complex [(NH₃)₅Ru^IIIORu^IV(NH₃)₄ORu^III(NH₃)₅]⁶⁺ (Ru-red) incorporated in NaY zeolite. The parameters which influence on the electrode response (paste composition, potential scan rate, pH and interference) were also investigated. The optimum conditions were found to an electrode composition (m/m) of 25% zeolite containing 6.7% Ru, 50% graphite and 25% mineral oil in acetate buffer at pH 4.8. Voltammetric peak currents showed a linear response for L-dopa concentration in the range between 1.2×10⁻⁴ and 1.0×10⁻² mol l⁻¹ (r=0.9988) with a detection limit of 8.5×10⁻⁵ mol l⁻¹. The variation coefficient for a 1.0×10⁻³ mol l⁻¹ L-dopa (n=10) was 5.5%. The results obtained for L-dopa in pharmaceutical formulations (tablet) was in agreement with compared official method. In conclusion, this study has illustrated that the proposed electrode modified with Ru-red incorporated zeolite is suitable valuable for selective measurements of L-dopa.     

A Novel Strategy for Determination of Paracetamol in the Presence of Morphine Using a Carbon Paste Electrode Modified with CdO Nanoparticles and Ionic Liquids

A voltammetric sensor for determination of paracetamol in the presence of morphine is described for the first time. The synthesized CdO nanoparticles were characterized with different methods such as scanning electron microscopy (SEM) and X‐ray diffraction (XRD). The paracetamol and morphine peaks are separated ca. 0.37 and 0.65 V, respectively; hence paracetamol can be analysed in the presence of morphine and more than 21 times of the current excess of paracetamol. The detection limits for paracetamol and morphine were 0.07 and 0.1 μM, respectively. The sensor has been successfully applied for the assay of the above compounds in real samples.     

C-N Bond Formation by Consecutive Continuous-Flow Reductions towards A Medicinally Relevant Piperazine Derivative

A new, continuous-flow consecutive reduction method was developed for the C-N bond formation in the synthesis of the key intermediate of the antipsychotic drug cariprazine. The two-step procedure consists of a DIBAL-H mediated selective ester reduction conducted in a novel, miniature alternating diameter reactor, followed by reductive amination using catalytic hydrogenation on 5% Pt/C. The connection of the optimized modules was accomplished using an at-line extraction to prevent precipitation of the aluminum salt byproducts.     

Modification of Carbon Paste Electrode Based on Molecularly Imprinted Polymer for Electrochemical Determination of Diazinon in Biological and Environmental Samples

The wide use of pesticides can lead to environmental and human adverse effects. Diazinon, as an organophosphorous pesticide, is used in agriculture because of its low cost and high efficiency on insects. Due to the increasing application of pesticides, accurate analytical methods are necessary. The aim of this work was modification of carbon paste electrode composition and applying it as a sensor for determination of diazinon in biological and environmental samples. Multi‐walls carbon nanotubes and a molecularly imprinted polymer were used as modifiers in the sensor composition. A molecularly imprinted polymer and a non‐imprinted polymer were synthesized for applying in the electrode. After optimization of electrode composition, it was used to determine the analyte concentration. Instrumental parameters affecting the square wave voltammetric response were adjusted to obtain the highest current intensity. The modified electrode with MIP showed very high recognition ability compared to the electrode containing NIP. The obtained linear range was 5×10⁻¹⁰ to 1×10⁻⁶ mol L⁻¹. The detection limit of the sensor was 1.3×10⁻¹⁰ mol L⁻¹ and the relative standard deviation for analysis of target molecule by the proposed sensor was 2.87 %. This sensor was used to determine the diazinon in real samples (human urine, tap, and river water samples) without special sample preparation before analysis. The optimization of electrode composition containing mentioned modifiers improved its response considerably.