Volatile phase profiling of mainstream smoke by glass capillary gas-chromatographic techniques

A heated injection system for a microprocessor-controlled GC has been developed for the (GC)² analysis of the volatile phase of whole smoke of a cigarette. Effects of injection port temperature and the presence of a Cambridge filter pad are demonstrated. Chromatograms are shown for smoke samples with and without a Cambridge Filter with the sample valve oven at 25°, 165° and 205°C. The use of a flame ionization and a nitrogen-phosphorous detector is illustrated.     

Retention characteristics of volatile compounds on tenax TA

The chromatographic separation properties of long, thin adsorption tubes enable substance-specific quantitative enrichment and reduction to be achieved when sampling and thermal desorption are carried out in the same flow direction. The specific retention volumes, and also the breakthrough and peak end volumes, of 69 compounds in the boiling range between-164 and 126°C and of a relative molecular mass between 16 and 119 were determined at temperatures between 30 and 130°C: normal alkanes, isoalkanes, cycloalkanes, alkenes, polyenes, alkynes, aromatics, ethers, alcohols, aldehydes, ketones, carboxylic acids and their esters, nitroalkanes, O-heterocycles, S-heterocycles, chloroalkanes, water, nitrogen monoxide, nitrogen dioxide, carbon dioxide, and sulfur dioxide. The correlation between adsorbent temperature and specific retention volume of these components, presented in the form of diagrams, permits the required quantity of adsorbent to be determined for a given sample volume. Contrary to literature sources, even extremely volatile compounds such as propane, propene, methanol, formaldehyde, formic acid, and chloromethane can be quantitatively retained on Tenax provided the operating conditions are appropriately selected.     

Principal component analysis of carbon-13 substituent-induced chemical shifts of some unsaturated compounds

Principal component analysis (PCA) is applied to 32 disubstituted unsaturated compounds (Y–CH₂–X): cyanides, oximes and propenes; bearing 12 -substituents: F, Cl, Br, I, OMe, OEt, SMe, SEt, NMe₂, NEt₂, Me, and Et. The experimental ¹³C chemical shifts for the -carbon and functional carbon atoms are correlated with theoretically derived molecular properties, i.e. partial charges, electronegativity, hardness, dipole moments and the nuclear repulsion energies. In the first PCA, the clustering of these three classes of organic compounds occurred mostly because of the chemical shifts and partial charges, and also of the dipole moments, hardness and electronegativity parameters as confirmed by loading graph. A strong grouping is observed in the second PCA, showing the chemical shift dependence on the type of heteroatom substituents. Therefore, sulfur, nitrogen, oxygen and neutral groups exhibit four types of C-13 SCS influences, indicating that the heteroatom (Y) properties play a significant role on the effects on chemical shifts. The -halogenated compounds represent a very heterogeneous group due to possible orbital interactions between the functional group and the substituent. The third PCA shows the grouping of F, Cl, Br and I derivatives, confirming the second PCA results that same halogen presents the same or very similar effects on the chemical shifts.     

Structural and dynamic variations in DNA hexamers containing T-T and F-F single and tandem internal mispairs

Molecular dynamics simulations of double-helical DNA oligomers have been performed to investigate differences in the structure, dynamics, and hydration of F-F and T-T mispairs. Hexamers containing F-F pairs were found to be more dynamic, especially in the region of the mispair itself. This dynamic variability derives from greater flexibility of F-F pairs. The T-T mispairs, on the other hand, were found to be comparatively tightly bound as wobble pairs. The major and minor groove edges of the T-T pairs were observed to be solvated at exposed carbonyl positions by at least one water molecule, while F-F pairs lacked solvating waters. Stacking interactions were nearly identical for T-T and F-F pairs, leading to similar average structures, even though F stacking was more dynamically variable. Solvation differences between F-F and T-T therefore support the steric exclusion model for nucleotide incorporation in DNA replication. Large differences in the orientation of minor groove functional groups, in addition to differences in solvation, further rationalize why F bases present during DNA extension events induce stalls. Two novel nucleotides are proposed to further elucidate minor groove interactions of DNA with polymerase molecules.Electronic Supplementary Material This Material consists of equilibration protocol, plots of center-of-mass stacking, water radial distribution functions, helical parameter dynamics, and dynamics data for a control AT sequence. Supplementary material is available in the online version of this article at Contribution to the Jacopo Tomasi Honorary Issue     

明胶中α组分含量对明胶/羟基磷灰石复合材料力学性能的影响

选用α组分含量分别为20.5%,41%和50%的A、B、C 3种明胶作为原料,采用同时加入法制备了明胶/羟基磷灰石(HAP)复合材料.通过对干态复合物膜拉伸性能的测试和对比,发现,明胶α组分含量的变化对复合材料的弹性模量影响较大,而对拉伸强度和断裂伸长率的影响则相对较小,但总的来说,三者均随α组分含量的增加而增大.其中,α组分含量最高的复合物C的拉伸强度为86.40 MPa,弹性模量为2682.35 MPa,断裂伸长率为8.65%.另外,对复合物C基本性质的表征结果表明,该材料具有类似于自然骨的组成和结构性质,因此有望成为一种具有优异力学性能的骨替代材料.     

Characterization of Carbohydrates in Paper and Paper Pulps Using Anion Exchange Chromatography and Principal Component Analysis

In the course of this investigation, a method for the characterization and differentiation of paper pulps was developed. After hydrolyzation of the papers and the respective raw pulps with trifluoroacetic acid, the hydrolyzates were analyzed with respect to their carbohydrate composition using ion exchange chromatography. The variations in carbohydrate composition mainly arise from the various hemicelluloses of the papers and pulps. The chromatographic results were then further processed using principal component analysis which allows correlating the various papers to different pulp materials.     

Headspace solid-phase microextraction-gas chromatography-mass spectrometry applied to quality control in multilayer-packaging manufacture

A method based on headspace solid-phase microextraction-gas chromatography-mass spectrometry is proposed for the quality control of multilayer packaging and its manufacturing process. Volatile organic compounds (VOCs) are produced in the manufacturing process of the packaging. They can cause organoleptic problems or modify the properties of the packaging depending on the nature and the amount of the VOCs formed. The quantification using packaging samples with a known VOC concentration for the calibration is proposed in order to reduce the analysis time, and the method is validated using a statistical test. Finally, the method is applied to the determination of odour-responsible compounds in multilayer packaging samples obtained under different extrusion-coating conditions, i.e. type of extruder, type of polymer and extrusion speed.     

Fuzzy theory in analytical chemistry

The concept of fuzzy theory is described in order to provide the analyst with the means for dealing with vague statements, uncertain observations or the fuzziness of human perception and interpretation, in general. In a theoretical part, basic notions of fuzzy theory are given, such as types of membership functions, operations with fuzzy sets, definitions of fuzzy numbers, points, functions, and relations, and the use of linguistic variables. The difference between fuzziness and probability is outlined. The applications section demonstrates advantages of fuzzy theory methods compared to common mathematical methods with respect to data handling for calibration of analytical methods, to classification of Chromatographie and spectroscopic patterns, to component identification and multicomponent analysis, and to designing fuzzy expert systems for selection of analytical procedures.