基于近红外光谱的维生素C片无损鉴别分析

基于近红外光谱技术与化学计量学方法,建立了一种国内外不同品牌维生素C片的无损鉴别方法。采集了国内外8个品牌的维生素C片共计40个样本的近红外光谱数据,比较了完整样品以及粉末样品的近红外光谱,采用连续小波变换技术消除背景干扰和基线漂移,基于标准偏差与相对标准偏差的变量筛选方法筛选出具有代表性的波数点,结合主成分分析方法对国内外不同品牌维生素C片进行鉴别分析。结果表明:原始光谱存在着明显的背景干扰和基线漂移现象,且粉末样品的重现性要优于完整样品;单纯使用原始光谱无法辨别来自不同品牌的维生素C片;连续小波变换可以有效消除背景干扰,提高模型鉴别能力;完整样品的鉴别准确率优于粉末样品,说明国内外不同品牌维生素C片主要成分基本一致,可能是辅剂和工艺上存在细微差异。通过结合近红外光谱分析技术与化学计量学方法,可实现对国产以及进口不同品牌维生素C片的鉴别分析。     

Analysis of volatile compounds of rosemary honey. Comparison of different extraction techniques

Summary The analysis of the volatile fraction from honey requires the sugar matrix to be separated prior to the analysis by GC-MS. In this study, three extraction techniques, simultaneous extraction-distillation, liquid-liquid extraction and solid-phase extraction, were compared to the extraction of the volatile compounds of a rosemary honey. Analysis of these fractions by gas chromatography—mass spectrometry enabled the tentative identification of up to 122 volatile compounds (alcohols, ketones, aldehydes, acids, esters, terpenes, hydrocarbons, phenol, furan and pyran compounds). SDE extracts were rich in terpenes and esters, while the other two techniques avoided the formation of artefacts due to heating the sample.     

Static headspace analysis of volatile organic compounds in soil and vegetation samples for site characterization

Traditional methodologies for the characterization of volatile organic compounds (VOCs) in subsurface soil are expensive, time-consuming processes that are often conducted on samples collected at random. The determination of VOCs in near-surface soils and vegetation is the foundation for a more efficient sampling strategy to characterize subsurface soil and improve understanding of environmental problems.In the absence of a standard methodology for the determination of VOCs in vegetation and in view of the high detection limits of the method for soils, we developed a methodology using headspace gas chromatography with an electron capture detector for the determination of low levels (parts-per-billion to parts-per-trillion) of VOCs in soils and vegetation. The technique demonstrates good sensitivity, good recoveries of internal standards and surrogate compounds, good performance, and minimal waste. A case study involving application of this technique as a first-step vadose-zone characterization methodology is presented.     

Novel Catalytic Dielectric Barrier Discharge Reactor for Gas-Phase Abatement of Isopropanol

Catalytic gas-phase abatement of air containing 250 ppm of isopropanol (IPA) was carried out with a novel dielectric barrier discharge (DBD) reactor with the inner catalytic electrode made of sintered metal fibers (SMF). The optimization of the reactor performance was carried out by varying the voltage from 12.5 to 22.5 kV and the frequency in the range 200–275 Hz. The performance was significantly improved by modifying SMF with Mn and Co oxide. Under the experimental conditions used, the MnO _x /SMF showed a higher activity towards total oxidation of IPA as compared to CoO _x /SMF and SMF electrodes. The complete destruction of 250 ppm of IPA was attained with a specific input energy of ∼235 J/L using the MnO _x /SMF catalytic electrode, whereas, the total oxidation was achieved at 760 J/L. The better performance of the MnO _x /SMF compared to other catalytic electrodes suggests the formation of short-lived active species on its surface by the in-situ decomposition of ozone.     

SFE of rosemary oil: Assessment of the influence of process variables and extract characterization

The effects of temperature and solvent density on the characteristics of the extracts obtained from supercritical fluid extraction (SFE) of the volatile compounds from Brazilian rosemary (Rosamarinus officianalis L., Labiatae) using carbon dioxide (CO₂) as solvent were investigated. The experiments were performed in a semi-batch laboratory scale home-made unit at two temperatures, viz. 310.15 and 320.15 K, over the pressure range of 100-160 bar. This study allowed to determine the crossover point and the maximum solubility of the oil. The products were analyzed by HRGC-MS, and compounds grouped in three different classes according to their molecular mass distribution in order to evaluate the influence of the variables studied on the characteristics of the extracts. The model proposed by Sovová was adopted in an attempt to interpret the mass transfer phenomena in the extraction process.     

Gas chromatography-mass spectrometry as a tool for estimating odour concentrations of biofilter effluents at aerobic composting and rendering plants

The relationship between chemical concentrations (gas chromatography–mass spectrometry analysis) and odour concentrations (olfactometry) was studied for biofilter emissions from four aerobic vegetable, fruit and garden waste (VFG) composting plants and one animal rendering plant. For the VFG composting plants, the study revealed a good linear relationship of the odour concentration with the total volatile organic compounds (VOC) concentration (R²=0.97, n=16) as well as with the concentration of esters and ketones (R²=0.9, n=19). For biofilter emissions of the animal rendering plant, the total VOC concentration was a poor estimator for odour concentration. However, for this type of odour, concentrations of organic sulphur containing compounds correlated well with odour concentrations (R²=0.94, n=8). The results of the study also showed that the relationship between chemical and odour concentrations is specific for each type of odour and cannot be generalized.     

Review of recent UV–Vis and infrared spectroscopy researches on wine detection and discrimination

Wine has become a commodity of significant commercial value, and the demand for high quality wine by consumers has been increasing. Suitable analytical techniques are needed for its quality control. Ultraviolet, Visible, Near-infrared and infrared spectroscopy is by far one of the most important techniques for determining the wine quality, including its components and characterization. This review will overview the available most recent applications of spectroscopic techniques in the past decade for wine quality prediction and discrimination both quantitatively and qualitatively. The fundamental principles of these techniques will be introduced briefly, and some innovative setups/instrumentations will also be illustrated. At last the limitations and prospects of spectroscopic techniques for wine industry will be discussed.     

Preparation and characterization of Cu (II) supported on poly(8‐hydroxyquinoline‐p‐styrene sulphonate) and its application as catalyst for the synthesis of hexahydroquinolines

Cu ( II ) supported on poly(8‐hydroxyquinoline‐p‐styrenesulfonate) (Cu ( II )@PHQSS) was prepared and fully characterized by the different techniques including fourier transform infrared spectroscopy (FT‐IR), ¹H NMR, ¹³C NMR, thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), differential thermal analysis (DTA), scanning electron microscope (SEM) and energy dispersive X‐ray analysis (EDS). Afterward, the Cu ( II )@PHQSS as nanostructured catalyst was used as catalyst for the synthesis of hexahydroquinolines.     

Isolation and Determination of Volatile Organic Compounds from Water by Dynamic Purge-and-Trap Technique Coupled with Capillary Gas Chromatography

The preconcentration technique of purge-and-trap has been investigated in the present work for quantitative adsorption of volatile organic pollutants purged from water samples. A dynamic purging device with variable volume size has been constructed and tested to purge different concentrations of organic compounds. With Tenax GR as the adsorbent, a dynamic purge-and-trap technique was developed combining on-column preconcentration procedures using ambient trapping/thermal desorption/cryogenic focusing/back-flash injection prior to separation and determination using capillary gas chromatography. Various aromatic compounds in water were determined, giving linear working ranges over five orders of magnitude from 0.02 to 5000 µg/L. The analytical procedures were optimized under the assistance of ultrasonication with results validated for the determination of organic contaminants in underground water and tap water, giving over 93% recoveries and a detection limit of 0.01 µg/L, two orders of magnitude lower than those obtained using commercial available instruments with on-line configuration to minimize cross-contamination. The technique provides a potential automated method for in situ monitoring of volatile organic compounds in water.     

Preparation and characterization of new inorganic–organic hybrid catalyst H3PMo12O40/Hyd‐SBA‐15 and its application in the domino multi‐component reaction

We present novel inorganic–organic hybrid catalyst to accomplish domino multi‐component reaction (MCR) for synthesis of 3‐amino‐2′‐oxospiro[benzo[c]pyrano[3,2‐a]phenazine‐1,3′‐indoline]‐2‐carbonitrile/carboxylate derivatives. This methodology offers remarkable development by easy production of H₃PMo₁₂O₄₀/Hyd‐SBA‐15 in regard to solving the problem of using harsh catalysts, also it demonstrates to be impressive and environmentally friendly in term of low reaction times and high yields.