(SrTiO_3)_(1-x)(SrTaO_2N)_x固溶体的制备及光催化性能研究(英文)

通过高温固相反应合成了N掺杂的SrTiO3和(SrTiO3)1-x(SrTaO2N)x固溶体,对其进行了X射线衍射,紫外可见吸收光谱,X射线光电子能谱分析和比表面积的表征。随x由0增大至0.4,固溶体带隙变窄,由3.2eV降至2.3eV,吸收光谱由紫外光区扩展到可见光区。在甲醇溶液(50mLCH3OH+220mLH2O)中进行了光催化分解水产生氢气的反应,在硝酸银溶液(270mL,0.01mol·L-1)中进行了光催化分解水产生氧气的反应,在可见光(λ420nm)照射下,实现了可见光响应的光催化分解水。     

含2-苯基吡啶配体的中性铱配合物的合成,晶体结构及发光性质(英文)

本文合成了一种中性的铱配合物[Ir(ppy)2(PPh3)(NCO)],并通过红外、核磁、电喷雾离子质谱和元素分析等对其进行了表征。通过X射线衍射确定了该配合物的晶体结构,该配合物晶体属于单斜晶系,空间群为P21/c。其中a=0.99447(4)nm,b=1.48082(6)nm,c=2.24713(11)nm,β=101.183(2)°,V=3.2464(2)nm3,Z=4,Dc=1.647g·cm-3,F(000)=1592,R1=0.0328,wR2=0.0987(I2σ(I))。光致发光光谱表明,该配合物在二氯甲烷、氯仿和DMF中的最大发射波长分别为485,484和515nm,即在二氯甲烷和氯仿中发蓝绿光,在DMF中发绿光。在强极性溶剂中,化合物的磷光最大发射波长发生了红移。     

基于蓝黄磷光二元互补色的高效聚合物白光器件

研究了基于互补色的高效聚合物白光器件,双色材料包括蓝绿光材料双(4,6-二氟苯基吡啶-N,C2)吡啶甲酰合铱(Firpic)和黄光材料三[3-(2,6-二甲基苯氧基)-6-(2-噻吩基)-哒嗪]铱(Fs-1),器件结构为ITO/PEDOT(40 nm)/PVK:OXD-7:Firpic:Fs-1(80 nm)/Ba(4 nm)/Al(120 nm).当发光层材料PVK∶OXD-7∶Firpic∶Fs-1质量比为63∶27∶10∶0.25时,用溶液加工方法得到高效白光器件,此时CIE色坐标为(0.30,0.39),最大电流效率为10.8 cd.A-1,亮度可达到4200 cd.m-2.在此基础上,引入水溶性电子注入材料聚[9,9-二(3′-N,N-二甲基胺基丙基-2,7-芴-2,7-交-(9,9-二辛基芴)](PFN)修饰阴极界面,使载流子注入和传输更平衡,当阴极为PFN(20 nm)/Al(120 nm)时,电流效率获得显著改善,达到13.1 cd.A-1,此时电流密度为4.9 mA.cm-2,亮度可达到6096 cd.m-2,白光器件的色坐标为(0.33,0.39),同时发光光谱稳定.另外通过电致发光(EL)、光致发光(PL)光谱及能级结构图分析了载流子俘获和能量转移在发光中的作用.     

氧化铈纳米粒子光催化降解亚甲基蓝的动力学和机理

 CeO2 nanocrystals were synthesized by a simple precipitation method and calcination at 600 °C. (NH4)2Ce(NO3)6 and ammonia were used as precursors. The CeO2 nanoparticles were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and N2 adsorption. The photodegradation of methylene blue catalyzed by CeO2 nanoparticles was studied under UV and sunlight irradiation. The highest degradation was obtained with 1.0 g/L CeO2 at pH 11 within 125 min. The pseudo first order rate constants of dye bleaching were calculated as 16.2x10-3 and 15.7x10-3 min-1 under UV and sunlight irradiation, respectively. The effect of iso-PrOH, iodide ion, and H2O2 was studied to predict the pathway of dye degradation. The obtained results indicate the effect of photogenerated holes in the degradation mechanism of the dye. Also, the photocatalytic activity of the prepared photocatalyst was studied in the presence of several negative ions.     

N掺杂空心TiO2微球的合成与表征

采用无皂乳液聚合合成的聚苯乙烯(PS)微球为模板、氨水/三乙醇胺为催化体系, 通过溶胶-凝胶方法合成了PS/TiO₂(核/壳)复合微球, 然后通过煅烧制备了N掺杂、锐钛型空心TiO₂微球. 在反应体系中三乙醇胺扮演双重角色, 既是TiO₂生成及包覆过程的抑制剂又是空心TiO₂微球的N掺杂剂. 改变氨水、三乙醇胺和钛酸正丁酯用量可控制TiO₂壳的形态和尺寸. 氨水用量增加, PS/TiO₂复合微球的壳表面变得粗糙|三乙醇胺用量增加, 壳表面变得光滑|钛酸正丁酯用量提高导致壳层变厚. 改变三乙醇胺用量可调节空心TiO₂微球中的N掺杂量|N掺杂空心TiO₂微球具有可见光响应和光催化作用.     

Photodegradation of Rhodamine B on Sulfur Doped ZnO/TiO2 Nanocomposite Photocatalyst under Visible-light Irradiation

Sulfur doped ZnO/TiO₂ nanocomposite photocatalysts were synthesized by a facile sol‐gel method. The structure and properties of catalysts were characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), UV‐vis diffusive reflectance spectroscopy (DRS) and N₂ desorption‐adsorption isotherm. The XRD study showed that TiO₂ was anatase phase and there was no obvious difference in crystal composition of various S‐ZnO/TiO₂. The XPS study showed that the Zn element exists as ZnO and S atoms form SO^2?₄. The prepared samples had mesoporosity revealed by N₂ desorption‐adsorption isotherm result. The degradation of Rhodamine B dye under visible light irradiation was chosen as probe reaction to evaluate the photocatalytic activity of the ZnO/TiO₂ nanocomposite. The commercial TiO₂ photocatalyst (Degussa P25) was taken as standard photocatalyst to contrast the prepared different photocatalyst in current work. The improvement of the photocatalytic activity of S‐ZnO/TiO₂ composite photocatalyst can be attributed to the suitable energetic positions between ZnO and TiO₂, the acidity site caused by sulfur doping and the enlargement of the specific area. S‐3.0ZnO/TiO₂ exhibited the highest photocatalytic activity under visible light irradiation after Zn amount was optimized, which was 2.6 times higher than P25.     

Bi(Ⅲ)-茜素红-CTMAB体系共振散射光谱法测定环境水样中痕量铋

在pH=4.1的HCl溶液中,Bi(Ⅲ)与茜素红和十六烷基三甲基溴化铵（CTMAB）缔合形成粒径较大的疏水性三元离子缔合物（结合比为n(Bi(Ⅲ))∶n(AR)∶n(CTMAB)=1∶3∶3）,该反应导致共振光散射显著增强,最大散射峰位于364 nm。 研究了反应介质、pH值、共振探针浓度等对散射体系的影响,考察了该散射反应的稳定性及共存物质的影响,并对该三元离子缔合物的反应机理进行了探讨。 在2.5 mL 1.0×10-4 mol/L茜素红和2.0 mL 1.0×10-4 mol/L CTMAB最优试验条件下,Bi(Ⅲ)质量浓度与共振光散射强度ΔI364 nm在0～0.384 mg/L范围内呈良好线性关系,检测限为5.898×10-8 g/L,对含量为0.18 mg/L Bi(Ⅲ)溶液进行11次平行测定,其相对标准偏差为2.2%。 将该方法用于环境水样中痕量铋(质量浓度为0.552～0.831 μg/L)的测定,加标回收率为99.5%～100.2%,测定偏差小于2.7%。 基于Bi(Ⅲ)-AR-CTMAB三元离子缔合物的共振光散射光谱,建立了以茜素红染料为光谱探针的痕量Bi(Ⅲ)共振光散射检测新方法。     

Microwave hydrothermal synthesis and photocatalytic activity of AgIn5S8 for the degradation of dye

AgIn₅S₈ powders were successfully synthesized by a microwave hydrothermal method for the first time. This method is a mild and highly efficient route involves no templates, catalysts, or surfactants. Therefore, it is very promising for the low-cost and large-scale industrial production. The samples were characterized by X-ray diffraction, UV-vis spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. The photocatalytic activity of AgIn₅S₈ nanoparticles was investigated through the degradation of methyl orange under visible light irradiation. Compared with TiO_2−xN_x, AgIn₅S₈ has exhibited a superior activity under the same condition. A liquid chromatogram-mass spectrometer was used to separate and identify the dye and degradation products generated during the reaction. According to the experiment results, a possible mechanism for the degradation of organic pollutant over AgIn₅S₈ was proposed.     

肉牛饲料添加剂中铅含量的测定

利用火焰原子吸收光谱法(FAAS),测定了硫酸铜、硫酸锌、膨润土、米糠、氧化锌、菜渣、盐等7种肉牛饲料添加剂中铅(Pb)元素的含量.各添加剂的加标回收率在98%-108%之间,相对标准偏差(RSD)小于1.3%,具有良好的准确度和精确度.结果表明,试验中所测的硫酸铜、硫酸锌、氧化锌添加剂中铅含量严重超出国家标准.     

可见光光催化剂AgNbO3：柠檬酸络合法制备及其性能

以草酸铌铵和硝酸银为反应物,采用柠檬酸络合法成功的制备了钙钛矿型化合物AgNbO3可见光光催化剂,并运用X射线衍射、紫外-可见漫反射、扫描电镜、透射电镜和X射线光电子能谱等手段对催化剂进行了表征。同时以可见光为照射光源,以有机染料亚甲基蓝为模拟探针,考察其光催化性质。结果表明800℃所制备的样品具有最佳的光催化性能,其主要降解途径是以脱甲基的形式进行的,与固相法合成的样品相比,柠檬酸络合法所制备的样品具有较好的光催化性能。