Studies on the Synthesis of Morphinan Alkaloid： Preparation of the Key Allylic Silyl Ether Precursor

Morphinan alkaloid consisting of many diverse molecules has been attracting much attention of synthetic chemists because of their biologically significant activities and the intriguing structures1. As shown in the common nucleus 1 of these polycyclic frameworks, there is a unique quaternary carbon center with an aryl substituent representing a central synthetic challenge2. In connection with our constant investigations on the quaternary carbon chemistry3, we proposed a general and conceptually…     

Multigram Solution‐Phase Synthesis of Three Diastereomeric Tripeptidic Second‐Generation Dendrons Based on (2S,4S)‐, (2S,4R)‐, and (2R,4S)‐4‐Aminoprolines

Three diastereomeric second‐generation (G2) dendrons were prepared by using (2S,4S)‐, (2S,4R)‐, and (2R,4S)‐4‐aminoprolines on the multigram scale with highly optimized and fully reproducible solution‐phase methods. The peripheral 4‐aminoproline branching units of all the dendrons have the 2S,4S configuration throughout, whereas those units at the focal point have the 2S,4S, 2S,4R, and 2R,4S configurations. These latter configurations led to the dendrons being named (2S,4S)‐ 1 , (2S,4R)‐ 1 , and (2R,4S)‐ 1 , respectively. The 4‐aminoproline derivatives used in this study are new, although many closely related compounds exist. Their syntheses were optimized. The dendron assembly involved amide coupling, the efficiency of which was also optimized by employing the following well‐known reagents: EDC/HOBt, DCC/HOSu, TBTA/HOBt, TBTU/HOBt, BOP/HOBt, pentafluorophenol, and PyBOP/HOBt. It was found that the use of PyBOP is by far the best for dendrons (2S,4S)‐ 1 and (2R,4S)‐ 1 , and pentafluorophenol active ester is best for (2S,4R)‐ 1 . Because of their multigram scale, all couplings were done in solution instead of by solid‐phase procedures. Purifications were, nevertheless, easy. The optical purities of the key intermediates as well as the three G2 dendrons were analyzed by chiral HPLC analysis. These novel, diastereomeric second‐generation dendrons have a rather compact and conformationally highly rigid structure that makes them interesting candidates for applications, for example, in the field of dendronized polymers and in organocatalysis.     

Novel family of triphenylamine‐containing,hole‐transporting,amorphous, aromatic polyamides with stable electrochromic properties

We report the preparation and characterization of a series of novel electrochromic, aromatic poly(amine amide)s with pendent triphenylamine units. The synthesis proceeded via direct phosphorylation polycondensation between a novel diamine, N,N‐bis(4‐aminophenyl)‐N′,N′‐diphenyl‐1,4‐phenylenediamine, and various aromatic dicarboxylic acids. All the poly(amine amide)s were amorphous and readily soluble in many common organic solvents and could be solution‐cast into transparent, tough, and flexible films with good mechanical properties. They exhibited good thermal stability and 10% weight‐loss temperatures above 540 °C. Their glass‐transition temperatures were 263–290 °C. These polymers in N‐methyl‐2‐pyrrolidinone solutions exhibited strong ultraviolet–visible absorption peaks at 307–358 nm and photoluminescence peaks around 532–590 nm in the green region. The hole‐transporting and electrochromic properties were studied with electrochemical and spectroelectrochemical methods. Cyclic voltammograms of poly(amine amide) films prepared by the casting of polymer solutions onto an indium tin oxide coated glass substrate exhibited two reversible oxidation redox couples at 0.65 and 1.03 V versus Ag/AgCl in an acetonitrile solution. All the poly(amine amide)s showed excellent stability with respect to their electrochromic characteristics; the color of the films changed from pale yellow to green and then blue at 0.85 and 1.25 V, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2085–2098, 2005     

Segmental orientations and deformation mechanism of a poly(ether‐block‐amide) film

Simultaneous measurements of microscopic infrared dichroism, mesoscale deformation, and macroscopic stress have been made for a microphase‐separated film of poly(ether‐block‐amide) 4033 during uniaxial stretching at temperatures between 30 and 91 °C, well below the melting point of the hard polyamide‐12 (PA) domains. Before the onset of dramatic microstructural alterations, the true stress–strain relationship on the mesoscale can be described with an interpenetrating network model, and poly(tetramethylene oxide) (PTMO) soft segments undergo affine deformation. Beyond a threshold strain at which stress from the soft network becomes larger than that from the hard network, plastic deformation occurs in the hard PA domains, and this is accompanied by the downward derivations of the true stress and molecular orientation of PTMO blocks from the model predictions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1161–1167, 2005     

Synthesis of pyrazolo[1,5-c]pyrimidines from difluoroboron chelates of aroylacetones

A convenient method was developed for the synthesis of derivatives of 6H-pyrazolo[1,5-c]pyrimidine-7-thione and 7-aminopyrazolo[1,5-c]pyrimidine from difluoroboron chelate complexes of aroylacetones, amide acetals, and thiosemicarbazide or aminoguanidine. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 992–994, May, 2007.     

Cryoscopic and dynamic study of the molten system fluoroacetamide-sodium trifluoroacetate

The behavior of the molten system acetamide-electrolyte, including the peculiarity of the structure and the consequent relevant properties, such as the megavalue of the dielectric constant, was reported earlier. The probable structure is a micellar system composed of salt micelles dispersed in an amorphous solvent. The present paper reports measurements in a related system: fluoroacetamide-sodium trifluoroacetate. The phase diagram, the ultrasonic absorption of both longitudinal and shear waves, and the longitudinal relaxation time of the nuclear magnetic momentum were measured at different temperatures. The most importnat result was thatT ₁ (NMR relaxation time) on the¹⁹F nucleus shows that the amide and salt participate in different environments. The amide environment is less rigid; this proves that the system must be considered microheterogeneous. Moreover, the present system exhibited: 1) a less extended concentration area where supercooling phenomena occur; 2) a much broader curve of the real part of the mechanical impedance versus frequency; 3) a higher bulk viscosity in comparison with the CH₃CONH₂?CF₃COONa supercapacitive system.     

Synthesis of poly(ester amide)s by the melt polycondensation of semiaromatic polyesters with ethanolamine and their characterization

Semiaromatic poly(ester amide)s (PEAs) were synthesized by the melt polycondensation of ethanolamine (EA) derivatives with dimethyl terephthalate and ethylene glycol in the presence of tetrabutyl titanate as a catalyst, and their crystallization and thermal properties were investigated. The introduction of an amide group into a semiaromatic polyester such as poly(ethylene terephthalate) (PET) produced PEAs (EA-modified PET polymers) with an increase in the melting point. However, these PEAs were found to decompose at a lower temperature than PET on the basis of TGA. Moreover, direct pyrolysis/mass spectrometry measurements suggested that an initial step of the thermal decomposition was a β-CH hydrogen-transfer reaction via asix-member ring transition state at the ester–ethylene–amide unit, at which carbon–oxygen bond scission took place to yield carboxyl and N-vinylamide end groups. Furthermore, molecular orbital calculations using trimer models bis[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]terephthalate, N-[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]-4-[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyloxycarbonyl]benzamide, and N,N′-bis[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]terephthalamide strongly supported the idea that the β-CH hydrogen-transfer reaction in the thermal decomposition of PEAs might occur more easily at the methylene group next to the amide group in an ester–ethylene–amide unit rather than at the methylene group next to the ester group in an ester–ethylene–ester unit. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2184–2193, 2007     

Crystallization and crystal structure of poly(ester amide)s derived from L‐tartaric acid

The crystal structure and crystallization behavior of a series of poly(ester amide)s derived from L ‐tartaric acid, 1,6‐hexanediamine, and 6‐amino‐1‐hexanol were examined. The study included aregic polymers containing 5, 10, and 20% of ester groups in addition to the syndioregic polymer containing equal amounts of amide and ester groups. X‐ray diffraction data revealed that all the aregic poly(ester amide)s adopt the same crystal structure as the parent polyamide made of L ‐tartaric acid, and 1,6‐hexanediamine. In this structure, chains are slightly compressed and arranged as in the α‐form of nylon 66. Solid‐state nuclear magnetic resonance (NMR) revealed that ester groups are excluded from the crystal phase except for the case of the syndioregic polymer. Isothermal crystallization kinetics was analyzed according to the Avrami theory. Crystallization rates were found to decrease regularly with increasing contents in ester groups and with increasing crystallization temperature. Avrami exponent values close to 2 were found whereas spherulitic morphologies were observed by optical microscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 116–125, 2007     

Crystal structures of the pyrazinamide–p‐aminobenzoic acid (1/1) cocrystal and the transamidation reaction product 4‐(pyrazine‐2‐carboxamido)benzoic acid in the molten state

The synthesis of pharmaceutical cocrystals is a strategy to enhance the performance of active pharmaceutical ingredients (APIs) without affecting their therapeutic efficiency. The 1:1 pharmaceutical cocrystal of the antituberculosis drug pyrazinamide (PZA) and the cocrystal former p‐aminobenzoic acid (p‐ABA), C₇H₇NO₂·C₅H₅N₃O, (1), was synthesized successfully and characterized by relevant solid‐state characterization methods. The cocrystal crystallizes in the monoclinic space group P2₁/n containing one molecule of each component. Both molecules associate via intermolecular O—H...O and N—H...O hydrogen bonds [O...O = 2.6102 (15) Å and O—H...O = 168.3 (19)°; N...O = 2.9259 (18) Å and N—H...O = 167.7 (16)°] to generate a dimeric acid–amide synthon. Neighbouring dimers are linked centrosymmetrically through N—H...O interactions [N...O = 3.1201 (18) Å and N—H...O = 136.9 (14)°] to form a tetrameric assembly supplemented by C—H...N interactions [C...N = 3.5277 (19) Å and C—H...N = 147°]. Linking of these tetrameric assemblies through N—H...O [N...O = 3.3026 (19) Å and N—H...O = 143.1 (17)°], N—H...N [N...N = 3.221 (2) Å and N—H...N = 177.9 (17)°] and C—H...O [C...O = 3.5354 (18) Å and C—H...O = 152°] interactions creates the two‐dimensional packing. Recrystallization of the cocrystals from the molten state revealed the formation of 4‐(pyrazine‐2‐carboxamido)benzoic acid, C₁₂H₉N₃O₃, (2), through a transamidation reaction between PZA and p‐ABA. Carboxamide (2) crystallizes in the triclinic space group P with one molecule in the asymmetric unit. Molecules of (2) form a centrosymmetric dimeric homosynthon through an acid–acid O—H...O hydrogen bond [O...O = 2.666 (3) Å and O—H...O = 178 (4)°]. Neighbouring assemblies are connected centrosymmetrically via a C—H...N interaction [C...N = 3.365 (3) Å and C—H...N = 142°] engaging the pyrazine groups to generate a linear chain. Adjacent chains are connected loosely via C—H...O interactions [C...O = 3.212 (3) Å and C—H...O = 149°] to generate a two‐dimensional sheet structure. Closely associated two‐dimensional sheets in both compounds are stacked via aromatic π‐stacking interactions engaging the pyrazine and benzene rings to create a three‐dimensional multi‐stack structure.     

Copper(I) Clusters with Trifunctional Silyl Amide Ligands. Synthesis and Crystal Structures of [Li(THF)4]2[Cu10{RSi(NPh)3}4] (R = Me,Ph, Vin)

Treatment of CuCl with the lithiated silyl amides RSi(NLiPh)₃ (R = Me, Ph, Vin) in THF as solvent led to the formation of the novel Cu^I cluster compounds [Li(THF)₄]₂[Cu₁₀{RSi(NPh)₃}₄]. For each of the three compounds the X‐ray crystal structure analysis revealed similar Si₄N₁₂Cu₁₀ cores which are based on cubane like Cu₈ cores bearing two additional peripheral copper atoms. The copper atoms are coordinated nearly linearly by the μ₅‐bridging silyl amide ligands with Cu–N distances in the range of 187.1(3) to 194.5(4) pm and N–Cu–N angles of 171.6(1) to 178.7(1)°. For each of the compounds the structural parameters are very similar which indicates that the structures are barely influenced by the different steric requirements of the organic groups bound to silicon.