聚(对乙烯基苄基脲)大孔吸附树脂对银杏叶黄酮的吸附性能

通过静态吸附平衡和动态柱吸附试验,研究了自制大孔交联聚（对乙烯基苄基脲）树脂（简称PMVBU树脂）对银杏叶黄酮的吸附性能．结果表明,在pH=5．00时,该树脂对银杏叶黄酮有较好的吸附性能;PMVBU树脂对黄酮的吸附等温线符合Langmuir吸附等温方程,相关系数R^2〉0．99．308K时,PMVBU干树脂对黄酮的静态饱和吸附量达293．3mg／g．298K时,干树脂的动态吸附穿透容量为180mg／g．用75％的乙醇溶液对吸附在PMVBU树脂上的黄酮可进行有效洗脱．银杏叶提取液经过该树脂吸附柱吸附纯化后,黄酮纯度提高了18．6％,且树脂具有良好的重复使用性．     

Synthesis,characterization and epoxidation of hexakis-4-(2-(4-((β-methallyl)oxy)phenyl)propan-2-yl)phenoxycyclotriphosphazene

4-(2-(4-((β-Methallyl)oxy)phenyl)propan-2-yl)phenol was prepared via the reaction of methallyl chloride with bisphenol A and used for the synthesis of hexakis-4-(2-(4-((β-methallyl)oxy)phenyl)propan-2-yl)phenoxycyclotriphosphazene. It was revealed that the latter undergoes the Claisen rearrangement and can be also epoxidized by 3-chloroperbenzoic acid. The obtained epoxide was cured by a treatment with isophorone diamine. The decomposition and glass transition temperatures of cured resin were also estimated (275 and 130?°C, respectively) by DSC and TGA methods.     

Copper(II) complexes of imino-bis(methyl phosphonic acid) with some bio-relevant ligands. Equilibrium studies and hydrolysis of glycine methyl ester through complex formation

Binary and ternary complexes of Cu(II) involving imino-bis(methyl phosphonic acid) (IdP) abbreviated as H₄A and some selected bio-ligands, amino acids, peptides and DNA constituents (L), were examined. Cu(II) forms CuA and CuAH complexes with IdP. Ternary complexes are formed in a stepwise mechanism whereby iminodiphosphonic acid binds to Cu(II), followed by coordination of amino acid, peptide or DNA. The concentration distribution of the various complex species has been evaluated. The kinetics of base hydrolysis of glycine methyl ester in the presence of Cu(II)-IdP was studied in aqueous solution at different temperatures, and in dioxane-water solutions of different compositions at 25°C. The activation parameters are evaluated and discussed.     

超声提取-毛细管气相色谱法检测酱腌菜中对羟基苯甲酸酯

采用超声提取法提取酱腌菜中的对羟基苯甲酸甲酯、对羟基苯甲酸乙酯及对羟基苯甲酸丙酯,在SE30毛细管柱(33 m×0.53 mm,2.65μm)上得到了良好分离。对羟基苯甲酸甲酯、对羟基苯甲酸乙酯及对羟基苯甲酸丙酯在0～750μg/mL浓度范围内与色谱峰面积呈良好的线性关系,相关系数为0.9999。对羟基苯甲酸甲酯、对羟基苯甲酸乙酯、对羟基苯甲酸丙酯的检出限分别为0.1,0.1,0.2μg/mL,测定结果的相对标准偏差小于3.6%(n=11),平均回收率为84.5%～97.1%。     

N-硫代酰基硫乙酸功能化三乙撑四胺交联PVC树脂的制备及对Hg~(2+)的吸附

以聚氯乙烯为原料依次与四乙烯五胺、CS_2和ClCH_2COONa反应合成了一种新的含N、O、S的N-硫代酰基硫乙酸功能化三乙撑四胺交联聚氯乙烯螯合树脂,树脂结构经红外分析和元素分析表征. 探讨了在不同pH值、Hg~(2+)初始浓度、吸附温度和时间等条件下合成树脂对Hg~(2+)的吸附性能. 结果表明,螯合树脂对Hg~(2+)有较快的吸附速率,pH值约为2.0时,树脂对Hg~(2+)的吸附效果最好,随温度升高吸附量逐渐增大. 温度在35 ℃、Hg~(2+)起始浓度为17.66 mmol/L时,树脂对Hg~(2+)的吸附量可达3.330 mmol/g. 树脂对Hg~(2+)的吸附符合Langmuir和Freundlich等温式. 用0.2 mol/L HNO3-10%硫脲对吸附后的树脂进行洗脱,脱附率达99.20%.     

Partitioning behaviour of organic compounds between ionic liquids and supercritical fluids

Applications and prospects of two-phase, tuneable solvent systems composed of ionic liquids (ILs) and supercritical fluids with an emphasis on supercritical carbon dioxide (scCO(2)) are reviewed. The IL-scCO(2) biphasic systems have increasingly been used in diverse fields of chemistry and technology, and some examples of these applications are mentioned here. Rational design of such applications can obviously benefit from pertinent data on phase equilibria including the partition coefficients of the prospective products and reactants between the two phases. Therefore, a reliable technique to measure the limiting partition coefficients would be of value. Here, the pros and cons of supercritical fluid chromatography in this respect are discussed. An overview of methods for predictive thermodynamic modelling of binary (IL-scCO(2)) and ternary (solute-IL-scCO(2)) systems is also included.     

A solid phase extraction using a chelate resin immobilizing carboxymethylated pentaethylenehexamine for separation and preconcentration of trace elements in water samples

A chelate resin immobilizing carboxymethylated pentaethylenehexamine (CM-PEHA resin) was prepared, and the potential for the separation and preconcentration of trace elements in water samples was evaluated through the adsorption/elution test for 62 elements. The CM-PEHA resin could quantitatively recover various elements, including Ag, Cd, Co, Cu, Fe, Ni, Pb, Ti, U, and Zn, and rare earth elements over a wide pH range, and also Mn at pH above 5 and V and Mo at pH below 7. This resin could also effectively remove major elements, such as alkali and alkaline earth elements, under acidic and neutral conditions. Solid phase extraction using the CM-PEHA resin was applicable to the determination of 10 trace elements, Cd, Co, Cu, Fe, Mn, Mo, Ni, Pb, V, and Zn, in certified reference materials (EnviroMAT EU-L-1 wastewater and ES-L-1 ground water) and treated wastewater and all elements except for Mn in surface seawater using inductively coupled plasma atomic emission spectrometry. The detection limits, defined as 3 times the standard deviation for the procedural blank using 500 mL of purified water (50-fold preconcentration, n = 8), ranged from 0.003 μg L⁻¹ (Mn) to 0.28 μg L⁻¹ (Zn) as the concentration in 500 mL of solution.     

Synthesis and application of a highly efficient tetraester calix[4]arene based resin for the removal of Pb from aqueous environment

The present study describes the Pb²⁺ sorption potential of newly synthesized tetraester calix[4]arene (TC4) based resin from aqueous media. The TC4 resin was synthesized through diazotization reaction of TC4 with Amberlite XAD-4 in the presence of sodium nitrite in acidic medium. The TC4 resin was characterized by using different analytical techniques such as FT-IR, elemental analysis and scanning electron microscopy (SEM). The Pb²⁺ removal ability of the resin from the aqueous environment has been evaluated by both batch adsorption as well as column studies. The experiments have been conducted involving the determination of effect of pH, adsorbate concentration, adsorbent dosage, contact time and temperature. Moreover, on the basis of kinetic studies, the pseudo-first-order and pseudo-second-order adsorption kinetics were calculated. The thermodynamic parameters of lead adsorption were also calculated. Equation isotherms such as Langmuir (L), Freundlich (F), and Dubinin-Radushkevich (D-R) were successfully used to model the experimental data. From the D-R isotherm parameters, it was considered that the uptake of Pb²⁺ by TC4 resin is ion exchange mechanism. From the results it has been found that the TC4 resin is a versatile adsorbent for the removal of Pb²⁺ from the aqueous environment. The study also confers its impact on human health, reinstate of polluted sites and other fields of material science.     

Fabrication of dissolved O2 metric uric acid biosensor using uricase epoxy resin biocomposite membrane

Uricase purified from 20-day-old leaves of cowpea was immobilized on to epoxy resin membrane with 80% retention of initial activity of free enzyme and a conjugation yield of 0.056 mg/cm². The uricase epoxy resin bioconjugate membrane was mounted over the sensing part of the combined electrode of ‘Aqualytic’ dissolved O₂ (DO) meter to construct a uric acid biosensor. The biosensor measures the depletion of dissolved O₂ during the oxidation of uric acid by immobilized uricase, which is directly proportional to uric acid concentration. The biosensor showed optimum response within 10-12 s at a pH 8.5 and 35 °C. A linear relationship was found between uric acid concentration from 0.025 to 0.1 mM and O₂ (mg/l) consumed. The biosensor was employed for measurement of uric acid in serum. The mean value of uric acid in serum was 4.92 mg/dl in apparently healthy males and 3.11 mg/dl in apparently healthy females. The mean analytic recoveries of added uric acid in reaction mixture (8.9 and 9.8 mg/dl) were 93.6 ± 2.34 and 87.18 ± 3.17% respectively. The within and between batch CVs were <6.5 and <5.0%, respectively. The serum uric acid values obtained by present method and standard enzymic colorimetric method, showed a good correlation (r = 0.996) and regression equation being y = 0.984x + 0.0674. Among the various metabolites tested only, glucose (11%), urea (38%), NaCl (25%) and cholesterol (13%) and ascorbic acid (56%) caused decrease, while, MgSO₄ and CaCl₂ had no effect on immobilized enzyme. The enzyme electrode showed only 32% decrease during its use for 100 times over a period of 60 days at 4 °C.     

Comparison of adsorption equilibrium of fructose, glucose and sucrose on potassium gel-type and macroporous sodium ion-exchange resins

Adsorption equilibrium of fructose, glucose and sucrose was evaluated on sulfonated poly(styrene-co-divinylbenzene) cation-exchange resins. Two types of resins were used: potassium (K⁺) gel-type and sodium (Na⁺) macroporous resins. Influence of the cation and effect of the resin structure on adsorption were studied. The adsorption isotherms were determined by the static method in batch mode for mono-component and multi-component sugar mixtures, at 25 and 40 °C, in a range of concentrations between 5 and 250 g L⁻¹. All adsorption isotherms were fitted by a linear model in this range of concentrations. Sugars were adsorbed in both resins by the following order: fructose > glucose > sucrose. Sucrose was more adsorbed in the Na⁺ macroporous resin, glucose was identically adsorbed, and fructose was more adsorbed in the K⁺ gel-type resin. Data obtained from the adsorption of multi-component mixtures as compared to the mono-component ones showed a competitive effect on the adsorption at 25 °C, and a synergetic effect at 40 °C. The temperature increase conducted to a decrease on the adsorption capacity for mono-component sugar mixtures, and to an increase for the multi-component mixtures. Based on the selectivity results, K⁺ gel-type resin seems to be the best choice for the separation of fructose, glucose and sucrose, at 25 °C.