Accurate Theoretical Study of LiS Radical and Its Singly Charged Cation and Anion in their Ground Electronic State

Potential energies of LiS(²Π), LiS^-(¹Σ⁺) and LiS⁺(³Σ^-) are calculated by using the multireference configuration interaction method including Davidson correction and the augmented correlation-consistent basis sets aug-cc-PV(X+d)Z (X=T, Q). Such obtained potential energies are subsequently extrapolated to the complete basis set limit. Both the core-valence correction and the relativistic effect are also considered. The analytical potential energy functions are then obtained by fitting such accurate energies utilizing a least-squares fitting procedure. By using such analytical potential energy functions, we obtain the accurate spectroscopic parameters, complete set of vibrational levels and classical turning points. The present results are compared well with the experimental and other theoretical work.     

Nonequilibrium vibration-dissociation phenomena behind a propagating shock wave: Vibrational population calculation

An analysis of nonequilibrium phenomena behind a plane shock is presented concerning the vibrational relaxation and the dissociation of a pure diatomic gas. In the first part, the temperature range is 600 K–2500 K and the dissociation processes are neglected. The population of each vibrational level is computed by solving relaxation and conservation equations. The relaxation process is described by the master equations of each vibrational level. The vibrational transition probabilities appearing in the relaxation equations are calculated analytically and take into account the anharmonicity of molecular vibration and the potential angular dependence. The populations obtained are compared to those calculated using a Treanor model and to those calculated with a nonequilibrium Boltzmann distribution. For moderately high levels significant differences may be observed. The importance of the V-V process is found to be weak for the transitions involving the lowest levels. In the second part, the temperature range is 2500 K–5500K and the dissociation process is taken into account as well as the gas dynamic behavior which did not appear in several recent works. The kinetic equations are transformed to obtain a first order differential system and the resolution of such a system coupled with the conservation equations leads to the population of each vibrational level. The vibrational transition probabilities associated with the atom-molecule interaction are deduced from the cross section calculation used in the first part. The bound-free transition probabilities are obtained, following Marrone and Treanor, assuming that dissociation must occur preferentially from the higher vibrational states: the Marrone and Treanor probability model is extended and employed with an anharmonic oscillator. In the present investigation, behind the shock wave, the evolution of the population distribution expressed as a function of the distance is not monotonous: a lag time appears as shown experimentally in previous works for the macroscopic parameters. For moderately high levels the influence of the anharmonicity and those of the V-V processes appear significant and strongly related. In a general way, in both temperature ranges investigated, the V-V processes reduce the effects of the T-V transfer. Finally the influence of thecharacteristic probability temperature U of Marrone and Treanor is analyzed and a method of determination of local varying U is proposed.     

Study of the vibrational spectra of SO2, H2O and D2O using the U(4) algebraic model

Using the U(4) algebraic model, in this work we report a study of the vibrational spectra of SO₂, H₂0¹⁸ and D₂O¹⁶. The inclusion of intermode couplings in algebraic models has been stated to give a deep insight into detailed spectroscopy for these bent XY₂ molecules. Improved set of algebraic parameters has been reported to provide improved RMS deviations for these molecules.     

Vibrational spectra and reinvestigation of the crystal structure of a polymeric copper(II)-orotate complex, [Cu(μ-HOr)(H2O)2]n: The performance of new DFT methods, M06 and M05-2X, in theoretical studies

The crystal and molecular structure of a polymeric Cu(II)-orotate complex, [Cu(μ-HOr)(H₂O)₂]_n, has been reinvestigated by single crystal X-ray diffraction. It is shown that several synergistic interactions: two axial Cu-O interactions; intramolecular and intermolecular hydrogen bonds; and π-π stacking between the uracil rings contribute to the stability of the crystal structure. The Raman and FT-IR spectra of the title complex are reported for the first time. Comprehensive theoretical studies have been performed by using three unrestricted DFT methods: B3LYP; and the recently developed M06, and M05-2X density functionals. Clear-cut assignments of all the bands in the vibrational spectra have been made on the basis of the calculated potential energy distribution, PED. The very strong Raman band at 1219 cm⁻¹ is diagnostic for the N1-deprotonation of the uracil ring and formation of the copper-nitrogen bond, in this complex. The Cu-O (carboxylate) stretching vibration is observed at 287 cm⁻¹ in the IR spectrum, while the Cu-N (U ring) stretching vibration is assigned to the strong Raman band at 263 cm⁻¹. The molecular structure and vibrational spectra (frequencies and intensities) calculated by the M06 functional method are very similar to the results obtained by the B3LYP method, but M06 performs better than B3LYP in calculations of the geometrical parameters and vibrational frequencies of the interligand O-H?O hydrogen bonding. Unfortunately, the M05-2X method seriously overestimates the strength of interligand hydrogen bond.     

Infrared and Raman spectra, conformational stability and vibrational assignment of 1-chloro-1-silacyclopentane

Infrared and Raman spectra (3500-60 cm⁻¹) of gas and/or liquid and solid 1-chloro-1-silacyclopentane (c-C₄H₈SiClH) have been recorded and the vibrational data indicate the presence of a single conformer with no symmetry which is consistent with the twisted form. Ab initio calculations with a variety of basis sets up to MP2(full)/aug-cc-pVTZ predict the envelope-axial and envelope-equatorial conformers are saddle points with nearly the same energies but much lower in energy than the planar conformer. Density functional theory calculations by the B3LYP method predicts slightly lower energies for the two envelope forms and considerably lower for the planar form. By utilizing the MP2(full)/6-31G(d) calculations the force constants, frequencies, infrared intensities, band contours, Raman activities, and depolarization values have been obtained to support the vibrational assignment. Estimated r₀ structural parameters have been obtained from adjusted MP2(full)/6-311 + G(d, p) calculations. These experimental and theoretical results are compared to the corresponding quantities of some other five-membered rings.     

Improved DFT calculation of Raman spectra of silicates

Very accurate vibrational spectra of silicates are obtained from DFT calculations if the appropriate Hamiltonian is used. Theoretical considerations suggest that the Hartree-Fock component of ACM1 hybrid functionals should be 1/6 instead of 1/4 for this class of compounds. When applied to the PBE functional this removes the scaling error of the calculated vibrational frequencies. Calculations using this PBE(n = 6) functional in combination with optimized Gaussian basis sets result in very small remaining deviations between observed and calculated Raman shifts, with standard uncertainties of ≈3.5 cm⁻¹, maximum deviations of ≈10 cm⁻¹, and no significant systematic trends. This has been confirmed for a wide range of silicate structures, for which high-quality Raman spectra have been published: forsterite α-Mg₂SiO₄ (nesosilicate), γ-Y₂Si₂O₇ (sorosilicate), K₂Ca₃Si₃O₁₀ (oligosilicate), K₂Ca₄Si₈O₂₁ (phyllosilicate), and α-quartz SiO₂ (tectosilictae).     

Comment on the assignments of some vibrational bands of oxalyl fluoride

In view of existing contradictory assignments of the symmetrical stretching vibrations associated with the formal C-C and C-F bonds of trans/cis oxalyl fluoride, an additional theoretical analysis of the corresponding calculated wavenumbers was preformed on trans-C₂O₂F₂ and cis-C₂O₂F₂ based on previously calculated ab initio scaled force fields at the HF/6-31G computational level and new force fields calculated at the MP2/aug-cc-pVTZ level. This novel analysis included computational data from the isotopic shifts brought about by incorporating ¹³C and ¹⁴C atoms into the structure. A detailed examination of the calculated wavenumbers made it possible to validate the assignments of the ν₂ and ν₃ wavenumbers in the trans-C₂O₂F₂ and cis-C₂O₂F₂ molecules as the formal C-C bond stretching and the formal C-F bond symmetrical stretching vibrations, respectively.     

Analytical techniques in the study of highly-nitrated nitrocellulose

This work presents an updated overview of the analytical techniques used to study highly-nitrated nitrocellulose, which is used in explosives and is of forensic interest. Most articles published in the past decade were designed:(1) to investigate polymeric parameters of nitrocellulose (e.g., molar mass distribution, viscosity and specific refractive index) by size-exclusion chromatography;(2) to determine the morphological and thermal characteristics of nitrocellulose using thermal and spectroscopic techniques; and,(3) to study the thermal, biological and mechanical degradation of nitrocellulose by thermal, spectroscopic, and mass spectrometric (MS) techniques, alone or coupled to gas chromatography.However, the few papers that focused on the determination of nitrocellulose used in explosives employed analytical techniques [e.g., vibrational techniques (infrared and Raman spectroscopy), MS and ion-mobility spectrometry (IMS) and liquid chromatography (LC) (high-performance LC and ion chromatography)]. Most of the information reported by these techniques has been qualitative. Only quantitative determination of nitrocellulose or its nitrogen content has been performed by measuring the nitrite and/or nitrate ions released from its basic hydrolysis.     

Synthesis, spectroscopic and DFT investigation of dimethyl-2-(5-acetyl-2,2-dimethyl-4,6-dioxo-1,3-dioxan-5-yl)-3-(triphenylphosphinylidene)succinate

Dimethyl-2-(5-acetyl-2,2-dimethyl-4,6-dioxo-1,3-dioxan-5-yl)-3-(triphenylphosphinylidene)succinate has been synthesized and characterized by elemental analysis, FT-IR and ¹H, ¹³C and ³¹P NMR. The vibrational wavenumbers, gauge including atomic orbital (GIAO) ¹H and ¹³C chemical shift values of title compound in the ground state have been computed with density functional theory method (DFT) and the B3LYP functional. The basis sets used are 6-311G(d,p) and 6-31G(d). The harmonic vibrational wavenumbers have been computed and the scaled values have been compared with the experimental FT-IR spectra. The complete assignments have been performed on basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. Most of the computed wavenumbers are found to be in good agreement with the observed spectrum.     

DFT, FT-Raman and FT-IR investigations of 5-methoxysalicylic acid

FT-IR and FT-Raman spectra of 5-methoxysalicylic acid (5MeOSA) have been experimentally reported in the region of 4000–10 cm⁻¹ and 4000–50 cm⁻¹, respectively. The optimized geometric parameters, conformational equilibria, normal mode frequencies and corresponding vibrational assignments of 5MeOSA (C₈H₈O₄) are theoretically examined by means of B3LYP hybrid density functional theory (DFT) method together with 6-31++G(d,p) basis set. Furthermore, reliable vibrational assignments have made on the basis of potential energy distribution (PED) calculated and the thermodynamics functions, highest occupied and lowest unoccupied molecular orbitals (HOMO and LUMO) of 5MeOSA have been predicted. Calculations are employed for different conformations of 5MeOSA, both in gas phase and in solution. Solvent effects are investigated using chloroform and dimethylsulfoxide. All results indicate that B3LYP method is able to provide satisfactory results for predicting vibrational frequencies and the structural parameters, vibrational frequencies and assignments, IR and Raman intensities of 5MeOSA are solvent dependent.