二乙基二硫代氨甲酸银体系流动注射法测定砷

本文设计了一种ＡｇＤＤＣ流动注射－分光光度法测定砷的系统。该系统采用自制的氢化物发生及吸装置，将液体流路和载气流路结合在一起。     

Tetraalkylammonium bromides in methanol: Small angle neutron scattering and vapor pressure measurements

Vapor pressure measurements and small angle scattering (SANS) experiments are reported and discussed for bispiperidinium (BP) bromide and n-tetrapentylammonium bromide solutions in methanol at 25°C. The BP⁺ ion which may be considered as a tetraalkylammonium (TAA) ion with pairwise connected alkyl chains, is used for the study of the effects due to flexible TAA alkyl chains. SANS intensities are calibrated with the help of the precise osmotic coefficients from the vapor pressure measurements.     

Electronic spectrum of dibiphenylene-ethene radical anion

The electronic absorption spectrum for the dibiphenylene-ethene radical anion ( ), generated electrochemically in dimethylsulfoxide solutions, is reported. Based on calculations by the LCAO-MO method in theHückel approximation and on the analysis of the band positions it is suggested that in the molecule two planar fluorenylidene fragments are twisted (60°) about the central C=C bond.

---

Das Elektronenabsorptionsspektrum des Dibiphenylen-Radikalanions (Kurze Mitteilung)

Zusammenfassung Das Dibiphenylenethen-Radikalanion ( ) wurde elektrochemisch hergestellt und das Elektronenabsorptionsspektrum aufgenommen. Auf Grund von LCAO-MO Berechnungen in derHückel-Annäherung und der Analyse der Bandenlagen wird nahegelegt, daß im -Molekül zwei planare Fluorenyliden-Fragmente ca. 60° um die zentrale C=C-Bindung verdrillt angeordnet sind.

     

流动注射氢化物石墨炉原子吸收法的应用研究 Ⅰ.——实验装置与分析性能

氢化物石墨炉联用技术的原理是先在较低温度下将氢化物蒸气通入石墨炉并分解沉积于石墨管的内表面,然后再在高温下原子化。该法能明显提高灵敏度,消除液相和气相干扰。本文采用自制的半自动氢化物石墨炉进样系统及流动注射氢化物发生器,直接在普通石墨炉上进行氢化物石墨炉分析,研究了部分元素的测定条件,建立的方法操作方便,灵敏度高,耗样少,线性范围宽,是一种值得推广的新方法。     

氢化物发生石墨炉原位富集直接测定高温镍基合金中碲

通过选择碲的氢化物发生条件，克服了高含量镍对碲的干扰，把氢化物富集在涂钯石墨管里，然后再原子化，成功地测定了高温镍基合金中碲。     

丹宁纤维素富集-氢化物发生ICP-AES同时测定水中痕量锗

研究了丹宁纤维素富集10~(-11)g/ml级锗的条件,并考察了地下水中36种共存离子对磷酸介质中氢化物发生ICP-AES测定锗的干扰和消除,应用于测定地下水中的超痕量锗,结果满意,检出限为15ng/L。     

Computer generation of chemical structures from known fragments

The interactive generation of chemical structures from given fragments is described and discussed. It is implemented as a part of our expert system CARBON, based on C-13 NMR spectra. As it is designed, this program can also be a useful tool in the structure elucidation process when information on parts of the structure is obtained by other means (IR, mass and other spectrometries, chemical analysis, other relevant information). The topological characteristics of candidate fragments are first chosen interactively and then the elements are connected in all topologically possible ways. In the following step, the topological building blocks are substituted by chemical structural fragments resulting in a set of all chemical structures consistent with the input information.     

Optimization of selenium determination in plant samples by hydride generation and axial view inductively coupled plasma atomic emission spectrometry

The use of hydride generation coupled with axial view inductively couple plasma atomic emission spectrometry was presented for the determination of selenium in plant samples. The chemical factors affecting potentially the hydride generation efficiency (hydrochloric acid, sodium borohydride and sodium hydroxide concentrations) were assessed through investigation of chemical interference, accuracy and repeatability. The accuracy of measurements was not affected by elements present in high concentration in the plant matrix (K, Ca, Mg, and P). No interference was also observed with transition metals. Using a real sample (maize) with standard additions, decreases of recoveries were sometimes observed for 0.1% (m/v) NaOH, and attained 13.8% in the most unfavourable case. The final accuracy of the method was verified by using two certified reference materials: CRM 402 (white clover) and CRM 279 (sea lettuce). No statistically significant differences were obtained between the measured concentrations and the certified values. The optimized method was found sensitive (detection limit 0.15 μg l⁻¹), reliable and repeatable (R.S.D. between 1.3% and 4.0%).     

Synthesis and Characterization of ASnOAsO4(A = K and Rb)

Crystals of two alkali-metal tin(IV) arsenates, KSnOAsO₄ and RbSnOAsO₄, were grown from a flux and structurally characterized by single-crystal X-ray diffraction. Crystal data: RSnOAsO₄, orthorhombic, Pna2₁ (No. 33), a = 13.406(3) Å, b = 6.678(1) Å, c = 10.921(2) Å, Z = 8, R = 0.037 for 1173 independent reflections with I > 2.5ó(l); RbSnOAsO₄, as above except a = 13.567(3) Å, b = 6.791( 1) Å, c = 10.891(2) Å, R = 0.035 for 1958 independent reflections. The two compounds are isostructural with the nonlinear optical material KTiOPO₄. The oxygen frameworks of both tin compounds approximate closely to a centrosymmetric arrangement, as indicated from the analysis of atomic coordinates. Second harmonics were generated in powdered RbSnOAsO₄ to confirm the absence of a center of symmetry in the structure.     

Determination of arsenic in sediments, coal and fly ash slurries after ultrasonic treatment by hydride generation atomic absorption spectrometry and trapping in an iridium-treated graphite tube

A simple and reliable method for the determination of arsenic in sediment and in coal without sample digestion, based on hydride generation from slurry samples is proposed. After grinding the samples to a particle size of 50 μm, the sample powder was mixed with aqua regia and hydrofluoric acid in an ultrasonic bath for 30 min. After diluting the mixture with hydrochloric acid, the slurry was allowed to stand for 48 h, and an aliquot was used for hydride generation with sodium borohydride. More than 80% of the arsenic was leached to the aqueous phase under these conditions, except for one sediment sample with very high silica content. The generated arsine was collected in a graphite tube, treated with 0.5 mg of iridium as a permanent modifier, and the arsenic determination was carried out by electrothermal atomic absorption spectrometry. The same tube could be used for at least 160 cycles without any re-treatment. The greatest advantage of the method was that only a minimum of reagents and sample handling were required, reducing the risks of contamination and/or analyte loss. However, the addition calibration technique had to be used in order to obtain results within the 95% confidence level for 11 certified reference materials, 5 sediments, 5 coals and one coal fly ash. One certified sediment slurry was spiked with the analyte and the resulting addition calibration curve was used for the analysis of the certified sediments. Similarly, one certified coal was used to obtain the addition calibration curve for the coal and coal fly ash samples. The recoveries of the certified values, except for one sediment, were between 91 and 115%. The limits of detection in the samples were 0.54 and 0.7 μg g⁻¹ for the coal and sediment samples, respectively, obtained for 1 ml of slurry containing 1 mg of sample.