Trovacenchemie. 13 [1] Weg und Irrweg zu Di([5]trovacenyl)keton

Trovacene Chemistry. 13 [1] On Being Lead and Mislead in the Synthesis of Di([5]trovacenyl)ketone Di([5]trovacenyl)ketone ( 3¨ ) has been prepared from lithio‐[5]trovacene and dimethylcarbamoyl chloride and studied by X‐ray diffraction, cyclic voltammetry, magnetic susceptometry and EPR spectroscopy. Slight variation of the synthetic protocol affords an unusual trinuclear complex 5 ? that is also fully characterized. Spin‐spin exchange interaction is smaller in 3¨ than in 1,1‐di([5]trovacenylethene ( 2¨ ), which differs from 3¨ by a replacement of O for CH₂. The novel trinuclear complex 5 ? , however, displays exchange coupling very similar to that observed in 1‐methoxy‐2,5,6‐tri([5]trovacenyl)benzene ( 7 ? ). In both cases, an unsymmetrical triangular arrangement of S = 1/2 centers is encountered. These findings are discussed in terms of the nature of the respective spacers.     

Palladium complexes of a chiral P,C-chelating phosphino-(sulfinylmethyl)phosphonium ylide ligand

A new type of phosphino-phosphonium ylide ligand bearing a chiral sulfinyl center affords a P,C-chelated palladium(II) complex with a resolved asymmetric ylidic carbon atom. According to ³¹P NMR analysis of the crude material, the diastereoselectivity of the complexation at room temperature is ca. 7:1. In the crystal state, an X-ray diffraction analysis of one epimer reveals a quasi C₂-symmetric chloro-bridged dinuclear structure, where the (S) configuration of the sulfur atom induces a (S) configuration of the ylidic carbon atom. A in situ Pd(0) catalyst generated from the phosphino-ylide and Pd(PPh₃)₄ promotes allylic substitution of 3-acetoxy-1,3-diphenylpropene by sodium malonate in 70% yield and 5% e.e.     

Catalytic Hydrosilylation of Furan, Thiophene, and Pyridine Aldimines

The addition of hydrosilanes (HSiEt₃, HSiMe₂Ph, H₂SiPh₂) to the CH=N bond of heterocyclic azomethines has been studied in the presence of monovalent complexes of rhodium and palladium. The effect on the reaction of the CF₃ group of the aldimines, which were obtained from O-, S-, and N-heteroaromatic aldehydes and 2-trifluoromethylaniline, has been clarified, as were other regularities of the processes being studied. A series of corresponding furans, thiophenes, and pyridine amines has been synthesized.     

Preparation and properties of homogeneous V2O5-SiO2 xerogel composite based on interpenetrating polymer network

In this paper, we report the conducting and electrochemical properties of a homogeneous V₂O₅-SiO₂ xerogel composite obtained from the simultaneous polymerization in both inorganic components (Si-O and V-O based polymers) forming an interpenetrating polymer network, where a mutual “solubility” due to cross-links and entanglements was observed. The presence of V₂O₅ inside the silica matrix has a strong effect on electrical conductivity; measurements showed room temperature conductivity almost 1000 times higher than what is found in the literature. In addition, the electrochemical behavior is quite similar to that found in V₂O₅ xerogel. Moreover, the effects of thermal treatment on the conducting and electrochemical properties were investigated. It was found that both properties were improved with no significant effect on V₂O₅ xerogel layered structure.     

Characterization of Metallo Bis(terpyridine) Diblock Polymers by Nonaqueous Capillary Zone Electrophoresis

A method of nonaqueous capillary zone electrophoresis (CZE) has been developed to characterize block (co)polymers of poly(ethylene oxide) and poly(styrene) containing metallo bis(terpyridine) complexes as bridging units. Specific CZE separation conditions had to be applied, with barium perchlorate dissolved in N-methylformamide (NMF) as background electrolyte and OV-1701-OH deactivated capillaries. For detection UV absorption was measured at a wavelength of 316 nm. Metallo diblock polymers with molecular weights up to 30,000 Da could be analyzed by the proposed nonaqueous CZE method. Experiments performed with polymeric compounds containing Fe, Ni or Ru as central metal ions showed that their electrophoretic mobilities were independent of the type of metal ion. Therefore, the data on the size of the polymeric compounds could be obtained using just one set of calibration standards. Polydispersities of the samples calculated from the experimental results were in correlation with the polydispersities of the polymers used in the synthesis of the metallo diblock polymers. Several polymeric samples contained metallo mono(terpyridine) complexes as impurities. These by-products could be separated from the main product. With symmetrical diblock polymers only one by-product was detected, while with an asymmetric diblock polymer two types of mono-complexes were found. The amount of the mono-complexes present as impurities was dependent on the type of central metal ion (Ni > Fe >> Ru).     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

Organometallic chemistry related to applications for microelectronics in Japan

This is meant to be a brief overview of the developments of research activities in Japan on organometallic compounds related to their use in electronic and optoelectronic devices. The importance of organometallic compounds in the deposition of metal and semiconductor films for the fabrication of many electronic and opto-electronic devices cannot be exaggerated. Their scope has now extended to thin-film electronic ceramics and high-temperature oxide superconductors. A variety of organometallic compounds have been used as source materials in many types of processing procedures, such as metal–organic chemical vapor deposition (MOCVD), metalorganic vapor-phase epitaxy (MOVPE), metal–organic molecular-beam epitaxy (MOMBE), etc. Deposited materials include silicon, Group III–V and II–VI compound semiconductors, metals, superconducting oxides and other inorganic materials. Organometallic compounds are utilized as such in many electronic and optoelectronic devices; examples are conducting and semiconducting materials, photovoltaic, photochromic, electrochromic and nonlinear optical materials. This review consists of two parts: (I) research related to the fabrication of semiconductor, metal and inorganic materials; and (II) research related to the direct use of organometallic materials and basic fundamental research.     

Electronic structure and vibrational spectra of cis-diammine(orotato)platinum(II), a potential cisplatin analogue: DFT and experimental study

Orotic acid (vitamin B₁₃) is a key intermediate in biosynthesis of the pyrimidine nucleotides in living organisms, moreover, it may serve as the biological carrier for some metal ions. cis-Diammine(orotato)platinum(II), cis-[Pt(C₅H₂N₂O₄)(NH₃)₂] can be considered as a new potential cisplatin analogue. The FT-Raman and FT-IR spectra of the title complex are reported, for the first time. The molecular structure, vibrational frequencies, and the theoretical infrared and Raman intensities have been calculated by the density functional mPW1PW91 method. The detailed vibrational assignment has been made on the basis of the calculated potential energy distribution. The theoretically predicted IR and Raman spectra show very good agreement with experiment. Natural bond orbital (NBO) analyses were performed for cisplatin, carboplatin and the title complex. The results provided new data on the nature of platinum–ligand bonding in these compounds. Strong intramolecular hydrogen bond between the orotate ligand and the coordinated ammonia group stabilizes the structure of the platinum(II) complex. Thus, it is suggested that the orotate ligand in the title complex is more inert to the substitution reactions than the chloride ligands in cisplatin.     

Asymmetry in the Multiprotein Systems of Molecular Biology

Signaling in living systems needs to achieve high specificity, to be reversible, and to achieve high signal to noise. Signaling mediated by multiprotein systems has evolved that avoids the requirement for high-affinity binary complexes that would be difficult to reverse and which, in the overcrowded cell, would lead to excessive noise in the system. Symmetrical structures are only occasionally formed. When they are, it is principally to colocate components, for example, the tyrosyl kinases of growth factors, where dimers form. Symmetry is, however, often broken, presumably to create more sensitivity and specificity in the signaling system by assembling other components, into higher-order multiprotein systems. The binding of a single heparin to two 1:1 FGF:FGFR complexes is an example, as is the binding of a single ligase to the Xrcc4 dimer, perhaps so creating a further DNA-binding site.