Effects of gamma irradiation on the yields of volatile extracts of Angelica gigas Nakai

The study was carried out to determine the effects of gamma irradiation on the volatile flavor components including essential oils, of Angelica gigas Nakai. The volatile organic compounds from non- and irradiated A. gigas Nakai at doses of 1, 3, 5, 10 and 20 kGy were extracted by a simultaneous steam distillation and extraction (SDE) method and identified by GC/MS analysis. A total of 116 compounds were identified and quantified from non- and irradiated A. gigas Nakai. The major volatile compounds were identified 2,4,6-trimethyl heptane, α-pinene, camphene, α-limonene, β-eudesmol, α-murrolene and sphatulenol. Among these compounds, the amount of essential oils in non-irradiated sample were 77.13%, and the irradiated samples at doses of 1, 3, 5, 10 and 20 kGy were 84.98%, 83.70%, 83.94%, 82.84% and 82.58%, respectively. Oxygenated terpenes such as β-eudesmol, α-eudesmol, and verbenone were increased after irradiation but did not correlate with the irradiation dose. The yields of active substances such as essential oil were increased after irradiation; however, the yields of essential oils and the irradiation dose were not correlated. Thus, the profile of composition volatiles of A. gigas Nakai did not change with irradiation.     

Microwave-promoted cross-coupling of acid chlorides with arylboronic acids: a convenient method for preparing aromatic ketones

Simple catalytic systems for cross-coupling reactions of acyl chlorides with arylboronic acids under microwave conditions were tested. Microwave irradiation facilitated the reaction course. Mild reaction conditions afford the symmetrical and unsymmetrical aryl ketones in reasonable to high yields within a short time. A wide range of substrates bearing an electron-donating or an electron-withdrawing substituent on aryl ring of acid chloride as well as on boronic acid were examined and high yields of ketones were produced.     

Monodisperse thermosensitive particles prepared by emulsifier-free emulsion polymerization with microwave irradiation

The emulsifier-free emulsion polymerization of styrene (St) and N-isopropylacrylamide (NIPAAm) was successfully carried out with microwave irradiation, and the monodisperse thermoresponsive poly(styrene-co-N-isopropylacrylamide) (poly(St-co-NIPAAm)) particles with diameters in the range 100–130 nm were prepared. The morphology, size and size distribution of the poly(St-co-NIPAAm) particles were characterized by transmission electron microscopy, scanning electron microscopy (SEM) and photon correlation spectroscopy (PCS), respectively. The results showed that poly(St-co-NIPAAm) particles had spherical morphology, and the poly(St-co-NIPAAm) particles prepared by emulsifier-free emulsion polymerization with microwave irradiation were smaller, more uniform than those obtained with conventional heating. The hydrodynamic diameters of poly(St-co-NIPAAm) particles were decreased as the temperature increased from 25 °C to 40 °C, and poly(St-co-NIPAAm) particles collapsed remarkably at 32 °C, which is the lower critical solution temperature of the poly(N-isopropylacrylamide). The morphology of the assembled poly(St-co–NIPAAm) particles was observed by SEM, it was found that monodisperse poly(St-co-NIPAAm) particles could assemble to form the two-dimensional order structures.     

A mild and efficient method for halogenation of 3,5-dimethyl pyrazoles by ultrasound irradiation using N-halosuccinimides

The 4-halo-3,5-dimethyl pyrazoles have been synthetisized in good yields in short reaction times in the absence of a catalyst by reaction of 3,5-dimethyl pyrazoles with N-halosuccinimides (NBS, NCS and NIS) under ultrasound irradiation. Finally, the halogenation of pyrazoles with Br₂, ICl and I₂ was showed in similar conditions.     

氧气氛中紫外光辐照官能化HDPE的结构与性能研究

采用FT－IR，XPS，WAXD，DXC，凝胶和表面自由能力分析，研究了氧化氛中紫外辐照官能化高密度聚乙烯（HDPE）的化学结构、晶体结构和表面自由能的变化。与空气相比，在氧气氛中紫外辐照HDPE能提高C－O，C（＝O）O和C＝O等含氧基团的引入速度，同时又能降低HDPE中的凝胶含量，在空气和氧气氛中紫外辐照后，HDPE的晶型没有发生变化，仍为正交晶系；HDPE的晶胞参数a,b,c以及（110），（200），（020），（011），（111）等晶面间距基本保持不变；HDPE的熔融温度下降，但熔融热焓升高，结晶度增大，表面自由能增大，且在氧气氛中辐照HDPE的变化幅度较大。     

Improvement of plant parameters of the ROBO gamma irradiation facility due to design modification

Two industrial scale, “ROBO” type ⁶⁰Co gamma irradiation facilities have recently been put into operation in Syria and Peru, and the dosimetry commissioning of both plants have been carried out to determine dose distribution within products and to calculate plant parameters such as efficiency, dose uniformity ratio and throughput. There are some design modifications between the two plants in connection with the location of the carriers with respect to the source plaque and also to each other. The effect of these construction modifications on the plant parameters is discussed in the analysis of the dose distribution data measured in the carriers with depth and height among the four irradiation rows on both sides of the source plaque. The plant parameters were also calculated for different product densities using the technical data of the facilities, and the calculated and measured results were compared to each other.     

Reduction of the IgE-binding ability and maintenance of immunogenicity of gamma-irradiated Dermatophagoides farinae

House dust mites, Dermatophagoides farinae (DF) and Dermatophagoides pteronyssinus, are major allergens in the most common indoor allergen and are important risk factor for asthma. The modified antigen has been studied to treat allergic disorder. This study was carried out to measure possibility of modified allergen using gamma irradiation to treat allergy such as asthma. DF solutions (2 mg/ml) as target allergen were irradiated with Co-60 at 50 and 100 kGy. Conformational alternation of irradiated DF was observed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Levels of anti-irradiated DF mouse IgGs (sub-isotypes) against intact DF were measured similar to that of anti-intact DF IgGs. The binding abilities of house dust mite-allergic patients’ IgE were reduced depending on radiation dose, and irradiation could inhibit the binding ability of patients’ IgE more than 40%. This study has shown that the binding ability of IgE was reduced by conformational alteration by irradiation and the irradiated DF had epitopes capable to induce immunogeniciy.     

EPR study of free radicals in a main chain thermotropic polymer

Free radicals were generated in a rigid rod-like copolymer via mechanical route and by gamma radiation. The (EPR) method was used for studying free radicals formed at 123 K. The spectra of free radicals observed and the influence of molecular motions on the transport of radical centers in the fracture surface layer are discussed.     

Design of a combined ozone/electron beam process for waste water and economic feasibility of the process

A design of a combined ozone/electron beam irradiation process for treating a 50 m³/h waste water stream from a molasses processing is discussed. Moreover, a cost evaluation of such a process in comparison to a conventional ozonation/biology treatment process has been performed to assess the potential of the irradiation process for technical use. Although the result of this comparison is not bad for the irradiation process an implementation into a full scale plant would not seem to be the thing to do in the present case.     

Synthesis and characterization of new polyamides derived from di(4-cyanophenyl)isosorbide

New optically active polyamides were synthesized according to two ways: using a microwave-assisted polycondensation of an optically active isosorbide-derived diacylchloride with different aromatic diamines in NMP and using interfacial polymerization from an isosorbide-derived diamine with different diacylchlorides. The polymers are obtained with inherent viscosities in the range from 0.11 to 1.05 dL/g. The DSC and TGA measurements clearly demonstrate the high thermal stability of these polymers when considering the range of the melting points from 200 °C to 300 °C and the absence of decomposition till 350 °C.