(±)-3-正丁基-4-甲氧基苯酞的合成

以3-羟基苯甲酸为原料,通过中间体(±)-3-羟基-4-甲氧基苯酞合成了(±)-3-正丁基-4-甲氧基苯酞(?)。     

SDS/n－C5H11OH/n－C7H16/H2O体系中W/O－BI微乳液界面电性质

In the system of SDS/n-C5H11OH/n-C7H16/H2O with the weight ratio of SDS/n-C5H11OH/H2O system at5.0/47.5/47.5, the upper phase of the system was W/O microemulsion, and the lower phase was the bicontinuous microemulsion. When the n-heptane content was less than 1%, with the increase of the n-heptane content, the capacitance (Co, Cod) in the upper phase (W/O) dropped, the capacitance (CB1, CBld) in the lower phase (BI) raised. At the same time, the W/O-BI inteffacial potential (ΔE), capacitance (Ci), and charge-transfer current (ict) decreased.After the n-heptane content reached 1%, with the increase of the n-heptane content, ΔE, Ci and ict demonstrated no significant change.     

Cu-Ce/γ-Al2O3对硬脂酸催化水热脱氧产生烷烃的效果

利用等体积浸渍法制备Cu-Ce/γ-Al₂O₃催化剂，并在无H₂存在的条件下对硬脂酸进行催化水热液化。对催化剂进行BET比表面积分析和X射线衍射（XRD）分析可知，Cu-Ce/γ-Al₂O₃催化剂中存在CuO和CeO₂两种晶型，在300℃条件下水热反应12 h后具有更好的热稳定性。通过对硬脂酸进行水热液化实验和对生物油进行气相色谱-质谱（GC-MS）分析发现，加入Cu-Ce/γ-Al₂O₃催化剂能够获得最高的硬脂酸转化率（94.71%）和总烃产率（81.41%），水热液化脱氧效果最好。分析正烷烃的产率，结果发现硬脂酸在高温水热条件下主要发生脱羧反应。Cu-Ce/γ-Al₂O₃催化剂的加入能够同时促进反应过程中脱羧反应、加氢脱氧反应和裂化反应。此外，Cu-Ce/γ-Al₂O₃还能够促进羰基基团的脱除，有效减少产物中的醛和酮类物质。     

Synthesis of 2-Aminochromene Derivatives Catalyzed by KF／Al2O3

A series of 2-aminochromene derivatives including 2-amino-ben-zo[ h ] chromene, 2-amino-benzo [ f ] chromene and 2-amino-pyrano [3,2-h ]quinolin derivatives was synthesized from aryl-aldehyde, malononitrile or ethyl cyanoacetate and 1-naphthol or 2-naphthoi or 8-hydroxyquinoline in refluxing ethyl alcohol cat-alyzed by KF-Al2O3. The structures were confirmed by X-ray analysis.     

Michael-Addition Reaction of Malononitrile with α,β-Unsaturated Cycloketones Catalyzed by KF／Al2O3

A series of KF/Al2O3 catalyzed Michael-addition reactions between malononitrile and α,β-unsaturated cycloketones in DMF solution were studied. At room temperature, 2-cyano-3-aryl-3-(1,2,3,4-tetrahydronaphthalen-1-one-2-yl) propionitrile derivatives were synthesized by the reaction between 2-arylmethylidene-1,2,3,4-tetra-hydronaphthalen-1-one and malononitrile. However, if the temperature was increased to 80℃, 2-amino-3-cyano-4-aryl-4H-benzo[h]chromene derivatives were obtained in high yields. When the α,β-unsaturated ketones were replaced by 2,6-biarylmethylidenecyclohexanone or 2,5-biarylmethylidenecyclopentanone, another series of 2-amino-3-cyano-4H-pyran derivatives was isolated successfully. The structures of the products were confirmed by X-ray diffraction analysis.     

THF-FER沸石的系列研究—Ⅱ．模板剂分子THF的位置

用^13C HPDEC MAS NMR与热分析方法表征了在四氢呋喃（THF）-Na2O-SiO2- Al2O3-H2O体系中水热合成的高硅Na-THF-FER沸石、酸交换后的H-THF-FER沸石以及 吸附于Na-FER和H-FER沸石中的THF。结果证明，模板剂分子THF位于Na-THF-FER沸 石骨架的FER笼内，平衡骨架阳离子Na^+主要存在于十元环孔道；而吸附子FER沸石 中的THF仅处于十元环孔道中，合成样品中THF的化学位移与液态THF相比，向低场 移动，谱线明显变宽，表明THF分子与FER笼之间存在很强的相互作用。     

MCM-41分子筛负载钼钴系催化剂的噻吩HDS研究

通过氧吸附量、噻吩吸附热及反应速率常数的测定，研究了MoO3/MCM-41、MoO3-CoO(NiO)/MCM-41系列催化剂，发现，对于MoO3/MCM-41催化剂，当MoO3的质量分数（以MCM－41为底数，即MCM－41＝1g时，MoO3含量为0．15g，下同）从15％增加到20％时，其噻吩的加氢硫（HDS）活性增大，至25％时活性下降，所对应的氧吸附量（mL/g催化剂）也是先增大后减少，并且两者有很好的线性对应关系，而且噻吩吸附热则基本保持不变，采用不同的MoO3-CoO(NiO)浸渍顺序制备的MoO3-CoO(NiO)/MCM-41催化剂中，先浸渍CoO(NiO）再浸渍MoO3的催化剂，其噻吩HDS活性明显优于对其它浸渍顺序制备的催化剂，同时催化剂的氧吸附量和噻吩吸附热也最大。     

负载型双噁唑啉催化剂上的不对称Diels-Alder反应

 分别以乙烷桥键磺酸官能化的有机-无机杂化介孔材料、十二钨磷酸铯、活化硅胶以及SBA-15为载体,通过非共价键作用制备了负载型双噁唑啉催化剂,并将该催化剂用于催化3-((E)-2-丁烯酰基)-1,3-噁唑啉-2-酮和环戊二烯的不对称Diels-Alder反应. 研究表明,催化剂的性能取决于载体本身以及载体表面阴离子的性质. 以SBA-15为载体时产物的对映体选择性较低,可归因于载体表面较低的羟基浓度.     

超临界反应条件下Y型分子筛催化剂失活的研究

对苯烷基化过程中Ｙ型分子筛催化剂的失活进行了多方面的实验研究。结果表明，超临界条件下该催化剂的活性寿命比液相条件下长达四倍以上，借助色－质谱联用机分析两种操作的反应产物，发现含有多环物质，并且它们的种类和数量随条件而不同。根据热力学原理，建立了多环物在超蚧流体中的溶解模型，并以并四苯，并五苯和并六苯作为焦前物模拟物进行了计算。