TiO2纳米层(110)表面对DNA强吸附的第一性原理研究

纳米二氧化钛(TiO₂)由于具有卓越的生物相容性和优异的物理性能,因此有望在生物医学领域中发挥重要的作用,且应用前景广阔.利用第一性原理计算,深入地研究了金红石型TiO₂纳米层(110)表面与脱氧核糖核酸(DNA)不同碱基在界面之间的吸附性能及相互作用的原子机制.通过分析结合能和功函数的计算结果发现,TiO₂纳米层(110)表面对DNA碱基的吸附强度显著增强,比典型二维纳米材料的吸附强度大两倍以上.进而,通过研究电子能带结构和态密度计算结果,阐明了二者在界面之间的吸附机制,其起源于吸附体系显著降低的能级和C、N和/或O的2p轨道与费米能级附近Ti原子的3d轨道的强烈杂化.纳米TiO₂为DNA传感器和测序仪的设计提供了一种极具潜力的候选材料.     

Studies on the syntheses of polymetalloxanes and their properties as a precursor for amorphous oxide. IV. Properties of SiO2–TiO2 oxide fibers from polytitanosiloxane

From polytitanosiloxanes (PTS), SiO₂–TiO₂ oxide fibers with fairly good tensile strength were prepared, and their mechanical and thermal properties were investigated. The precursor fibers PTS-0.5 and PTS-1.0 were obtained by dry spinning of a highly viscous PTS solution which were formed as the reaction mixture of silicic acid (SA) with bis(2,4-pentanedionato)titanium diisopropoxide (PTP) in the molar ratios (SA/PTP) of 0.5 and 1.0. The precursor fibers PTS-0.5 were too brittle to measure their tensile strength, whereas PTS-1.0 and the heat-treated fibers were found to have tensile strength of 130 (precursor), 540 (500°C), and 450 (900°C) MPa, respectively. Heat-treatment of the fibers PTS-1.0 at above 1000°C forms anatase and rutile of titanium dioxide. The crystallization is resulted from the unreacted PTP which is not incorporated into the polymer network.     

SnO2TiO2 复合半导体纳米薄膜的研究进展*

本文概述了SnO₂TiO₂ 复合半导体纳米薄膜的发展历史和研究现状,对比分析了“混合”、“核壳”和“叠层”3 种复合薄膜的结构和性能特点,着重论述了叠层结构的SnO₂ /TiO₂复合薄膜的光电化学和光催化特性。结合作者的研究工作,探讨了SnO₂ /TiO₂双层复合薄膜上下层厚度对其光催化活性的影响,指出复合薄膜光催化活性的提高可归因于电子从TiO₂ 向SnO₂ 的迁移。最后对SnO₂ /TiO₂复合薄膜的局限性和发展潜势做一简要分析,强调了该复合薄膜本身的应用特点。     

溶胶-凝胶法制备丙烯酸树脂/TiO2有机-无机杂化材料及其结构表征

通过预水解的二氧化钛(TiO2 )溶胶与丙烯酸树脂共混或原位聚合的方法制备了均匀透明的丙烯酸树脂 TiO2 有机 无机杂化材料.考察了TiO2 溶胶制备方法、聚合物中—COOH官能团含量和杂化材料制备方法对杂化材料结构的影响.索氏抽提实验表明聚合物中的羧酸官能团和无机TiO2 相间发生了交联反应,且随着—COOH官能团含量的增加,交联程度增大.小角X射线散射(SAXS)结果发现,杂化材料中TiO2 为疏松的三维网状结构,且在纳米尺度范围内,但这种三维网状结构随着TiO2 溶胶制备中水或酸的用量增加,其致密度增加,尺寸增大.同原位聚合法相比,共混法可制备出更均匀的杂化体系,且TiO2 为单分散.     

活性炭负载TiO2-Fe3O4磁性光催化剂的制备及性能

采用溶胶-凝胶法制备了易于固液分离的活性炭（AC）负载磁性光催化剂（TiO2-Fe3O4／AC）．样品通过SEM-EDX和X射线衍射法进行表征．通过在紫外光照射下降解亚甲基蓝评价其光催化降解能力．结果表明：负载22％Fe3O4的光催化剂（含20％TiO2和58％AC）的光催化活性最强（120min时亚甲基蓝的降解率达到87％,是纯TiO2的2．7倍）;磁性光催化剂可实现磁分离回收．     

Partially crystallized Pd nanoparticles decorated TiO2 prepared by atmospheric-pressure cold plasma and its enhanced photocatalytic performance

TiO2 decorated with partially crystallized Pd nanoparticles （Pd/TiO2-P） was successfully prepared by atmospheric-pressure dielectric barrier discharge cold plasma. The XRD and XPS analyses proved that Pd ions were reduced to partially crystallized metallic Pd nanoparticles in Pd/TiO2-P. The XPS spectra also indicated that an enhanced metal-support interaction was formed due to the existence of partially crystallized Pd nanoparticles with lower coordination number in Pd/TiO2-P. Photocatalytic activity of Pd/TiO2-P was much higher than that of TiO2 samples decorated with well crystallized Pd nanoparticles.     

Fe掺杂Mn/TiO2低温脱硝催化剂的催化性能研究

采用氧化沉淀-浸渍法制备了不同含量Fe掺杂的Fe-Mn/TiO2低温脱硝催化剂,考察了催化剂在80~180 ℃范围内的脱硝能力并通过XRD、BET、TG、H2-TPR、NH3-TPD等测试手段,对催化剂的物理化学性质进行了表征.实验结果表明,Fe的加入并没有改变Mn/TiO2的主要晶相,仍是锐钛矿型的TiO2,MnOx和FeOx均以非晶态结构高度分散于载体表面,而且Fe的加入可以有效地改善催化剂的微观形貌、比表面积及表面酸性位点,从而提高其低温脱硝性能.Fe掺量在Fe/Ti为0.10时催化剂具有最佳性能,在120 ℃时脱硝率可达90;以上.     

钪与氧空位共掺杂锐钛矿相TiO2的形成能与电子结构的第一性原理研究

采用基于密度泛函理论的第一性原理研究了钪(Sc)、氧空位(O_V)单/共掺杂锐钛矿相TiO₂,对晶体结构、形成能以及电子结构进行了对比分析.研究结果表明,Sc-TiO₂在富氧环境下缺陷形成能为负值,富钛环境下缺陷形成能为正值,表明Sc-TiO₂只能在富氧环境下制备;O_V-TiO₂、Sc-O_V-TiO₂在富氧或富钛环境下缺陷形成能均为负值,但富氧环境下形成能更低;O_V-TiO₂的0/1-缺陷电荷转变能级为深能级,而Sc-TiO₂的0/1-缺陷电荷转变能级则属于相对较浅能级;与纯锐钛矿相TiO₂相比,Sc-TiO₂的禁带宽度略有减小,但O_V-TiO₂、Sc-O_V-TiO₂禁带宽度变宽.     

Flower-like shaped Bi12TiO20/g-C3N4 heterojunction for effective elimination of organic pollutants: Preparation,characterization, and mechanism study

Flower-like shaped Bi₁₂TiO₂₀ (Bismuth Titanate)/g-C₃N₄ (graphite-like carbon nitride) heterojunction was prepared through hydrothermal and sonification methods for the degradation of organic pollutants by visible-light irradiation. The preparation process, chemical structures, and the mechanism of photocatalytic enhancement of the heterostructures were studied systematically. Under visible-light irradiation, the novel flower-like shaped Bi₁₂TiO₂₀/g-C₃N₄ heterojunction demonstrates prominent activities for the degradation of rhodamine B and p-nitrophenol, with the introduction of flower-like shaped Bi₁₂TiO₂₀ into g-C₃N₄ composites greatly increasing the activity of pure g-C₃N₄. This activity enhancement for the heterojunction could be mainly attributed to its low recombination speed of electron–hole pairs, high adsorption ability of organic pollutants, and better optical absorption ability. Moreover, in the visible-light system of Bi₁₂TiO₂₀/g-C₃N₄, ^•OH also contributed to the degradation of pollutants, which may explain the enhanced photocatalytic activity after the introduction of Bi₁₂TiO_20, as ^•OH is inactive in pure g-C₃N₄. Furthermore, 10 wt.% Bi₁₂TiO₂₀/g-C₃N₄ showed not only high activity but also good stability for degradation of aqueous organic pollutants, implying potential applications prospect.