Aligned synthesis of multi-walled carbon nanotubes with high purity by aerosol assisted chemical vapor deposition: Effect of water vapor

Aligned multi-walled carbon nanotubes (MWCNTs) with high purity and bulk yield were achieved on a silicon substrate by an aerosol-assisted chemical vapor deposition. The introduction of specific amounts of water vapor played a key role in in situ controlling the purity and surface defects of the nanotubes. The morphology, surface quality and structure of MWCNTs were characterized by secondary and backscattered electron imaging in a field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). Crystallinity and defects of the MWCNTs’ were investigated by high-resolution transmission electron microscopy (HRTEM) and Raman spectroscopy. In this work, water vapor was found to provide a weak oxidative environment, which enhanced and purified the MWCNTs’ growth. However, excessive water vapor would inhibit the MWCNTs growth with a poor surface quality. In addition, it has been found that the surface morphology of the CNTs can be modified intentionally through producing some surface defects by tuning the amount of the water vapor, which may offer more nucleation sites on the chemically inert CNT surface for various applications such as catalyst support.     

Influence of ultrasonication and Fenton oxidation pre-treatment on rheological characteristics of wastewater sludge

The effect of ultrasonication and Fenton oxidation as physico-chemical pre-treatment processes on the change of rheology of wastewater sludge was investigated in this study. Pre-treated and raw sludges displayed non-Newtonian rheological behaviour with shear thinning as well as thixotropic properties for total solids ranging from 10 g/L to 40 g/L. The rheological models, namely, Bingham plastic, Casson law, NCA/CMA Casson, IPC Paste, and power law were also studied to characterize flow of raw and pre-treated sludges. Among all rheological models, the power law was more prominent in describing the rheology of the sludges. Pre-treatment processes resulted in a decrease in pseudoplasticity of sludge due to the decrease in consistency index K varying from 42.4 to 1188, 25.6 to 620.4 and 52.5 to 317.9; and increase in flow behaviour index n changing from 0.5 to 0.35, 0.62 to 0.55 and 0.63 to 0.58, for RS, UlS and FS, respectively at solids concentration 10–40 g/L. The correlation between improvement of biodegradability and dewaterability, decrease in viscosity, and change in particle size as a function of sludge pre-treatment process was also investigated. Fenton oxidation facilitated sludge filterability resulting in capillary suction time values which were approximately 50% of the raw sludges, whereas ultrasonication with high input energy deteriorated the filterability. Biodegradability was also enhanced by the pre-treatment processes and the maximum value was obtained (64%, 77% and 73% for raw, ultrasonicated and Fenton oxidized sludges, respectively) at total solids concentration of 25 g/L. Hence, pre-treatment of wastewater sludge modified the rheological properties so that: (1) the flowability of sludge was improved for transport through the treatment train (via pipes and pumps); (2) the dewaterability of wastewater sludge was enhanced for eventual disposal and; (3) the assimilation of nutrients by microorganisms for further value-addition was increased.     

大面积α-Fe2O3纳米线及纳米带阵列的制备研究

以铁箔为原材料和基片,通过控制热氧化过程中的宏观实验条件(载气流量及其组分、压强、温度分布和反应时间等),实现了α-Fe₂O₃一维纳米结构的可控生长,获得了大面积(10mm×10mm)、单分散性好、沿［110］方向生长的α-Fe₂O₃纳米带或纳米线阵列. 对不同宏观实验条件下所制备的样品进行形貌和晶格结构表征和分析,认为热氧化过程中α-Fe₂O₃一维纳米结构的生长遵循类似气- 关键词： 2O₃')" href="#">α-Fe₂O₃ 一维纳米结构 热氧化法     

Photocatalysts of Cr Doped TiO2 Film Prepared by Micro Arc Oxidation

通过微弧氧化法在Na3PO4+K2Cr2O7电解液中制备了系列铬掺杂二氧化钛薄膜. X射线和扫描电镜显示薄膜的主要晶相为锐钛矿型二氧化钛,且表面为多孔结构. 在可见光照射下,薄膜对降解亚甲基蓝和分解水有着较好的光催化性能,这主要是由铬的掺杂引起的.由于铬的掺杂,一方面在二氧化钛中形成了Cr3+/Cr4+离子对,另一方面在带隙中形成了氧的空位能级. 前者降低了电子-空穴的复合几率,而后者在二氧化钛的禁带中形成了新的能级. 新能级的形成使得由二氧化钛价带跃迁至氧空位能级所需的光子能量减少. 另外探讨了微弧氧化形成掺杂二氧化钛薄膜的机制.     

光谱技术分析尿素对BSA糖基化反应的影响

以牛血清白蛋白(BSA)和葡萄糖为原料,采用光谱技术从分子水平上研究不同浓度尿素(0～7 mol·L-1)对BSA糖基化反应的影响.结果表明:BSA经过尿素处理后,其糖基化产物的自由氨基含量和内源荧光强度均显著下降;同步荧光光谱表明BSA与尿素的结合点更接近于色氨酸(Trp)残基;紫外光谱分析表明经尿素处理后BSA的糖...     

A rational design of bimetallic PdAu nanoflowers as efficient catalysts for methanol oxidation reaction

Methanol fuel cells have been intensively developed as clean and high-efficiency energy conversion system due to their high efficiency and low emission of pollutants. Here, we developed a simple aqueous synthetic method to prepare bimetallic Pd Au nanoflowers catalysts for methanol oxidation reaction(MOR) in alkaline environment. Their composition can be directly tuned by changing the ratio between Pd and Au precursors. Compared with commercial Pd/C catalyst, all of the Pd Au nanoflowers catalysts show the enhanced catalytic activity and durability. In particular, the Pd Au nanoflowers specific activity reached 0.72 m A/cm2, which is 14 times that of commercial Pd/C catalyst. The superior MOR activity could be attributed to the unique porous structure and the shift of the d-band center of Pd.     

Impact of O_2 post oxidation annealing on the reliability of SiC/SiO_2 MOS capacitors

The effects of dry O_2 post oxidation annealing(POA) at different temperatures on SiC/SiO_2 stacks are comparatively studied in this paper. The results show interface trap density(Dit) of SiC/SiO_2 stacks, leakage current density(Jg), and time-dependent dielectric breakdown(TDDB) characteristics of the oxide, are affected by POA temperature and are closely correlated. Specifically, Dit, Jg, and inverse median lifetime of TDDB have the same trend against POA temperature, which is instructive for SiC/SiO_2 interface quality improvement. Moreover, area dependence of TDDB characteristics for gate oxide on SiC shows different electrode areas lead to same slope of TDDB Weibull curves.     

Pt-Pd /y-A120.催化剂氧化性能的研究‘

本文采用浸演法制备了一系列Pt-Pd/Y-AlzO,催化剂，并考察其对正己烷，正丁醉和苯的催化氧化性能.结果表明，Pt-Pd双组分催化剂对极性有机物正丁醉有很高的氧化活性，而对于非极性有机物苯和正己烷的氧化活性相对较差.对Y-AlzOa载体进行高温预处理后，催化剂对苯和正己烷的氧化活性有明显提高.     

Pourbaix diagrams in weakly coupled systems: a case study involving acridinol and phenanthridinol pseudobases

The thermodynamics of proton‐coupled electron transfer (PCET) in weakly coupled organic pseudobases was investigated using 2,7‐dimethyl‐9‐hydroxy‐9‐phenyl‐10‐tolyl‐9,10‐dihydroacridine (AcrOH) and 6‐phenylphenanthridinol (PheOH) as model compounds. Pourbaix diagrams for two model compounds were constructed using the oxidation potentials and the pK_a values obtained, respectively, from cyclic voltammetry and photometric titrations. Our comparative study reveals the importance of having the redox active –N center closer to –OH functionality on the thermodynamics of PCET process: PheOH exhibits a wider range of pH values (pH = 2.8 to 13.3) in which both the alcohol and the corresponding alkoxy radical are expected to coexist in solution. This result indicates that a concerted mechanism is more likely to be discovered in pseudobases analogous to PheOH. The thermochemical data also indicate that the concerted PCET mechanism cannot be achieved if water is used as the proton acceptor: assuming the pK_a of hydronium ions as ?1.7, the PCET involving PheOH or AcrOH as proton/electron donors and water as the proton acceptor is expected to follow the stepwise ET/PT mechanism. Copyright © 2015 John Wiley & Sons, Ltd.     

Structures,Oxidation, and Charge Transport of Phosphorus‐Doped Germanium Nanocrystals

The doping of semiconductor nanocrystals (NCs) is crucial for the optimization of the performance of devices based on them. In contrast to recent progress on the doping of compound semiconductor NCs and silicon NCs, the doping of germanium (Ge) NCs has lagged behind. Here it is shown that Ge NCs can be doped with phosphorus (P) during synthesis by a nonthermal plasma. It is found that there are more P atoms in the NC near‐surface region than in the NC core. P doping modifies the surface state of Ge NCs. Compressive strain can be incuced in Ge NCs by P which can explain the P‐doping‐enhanced oxidation resistance of Ge NCs. Stable dispersions of P‐doped Ge NCs in acetonitrile can be cast to produce films for field‐effect transistors (FETs). FET analysis shows that the electrical conductivity and electron mobility of a Ge‐NC film increase with the increase of the P doping level, although the electrical activation efficiency of P in the Ge‐NC film is low. Finally, atomic layer deposition of aluminum oxide at the surface of P‐doped Ge NCs is shown to improve the performance of the FETs.