江西相山铀矿区与非铀矿区稻谷中天然放射性核素含量对比研究

文章对比分析研究了江西相山铀矿区和非铀矿区稻谷中天然放射性核素U和Th的含量特征。样品分别采自江西省相山铀矿区及远离铀矿区的抚州市郊丘陵水稻种植区。结果表明相山铀矿区稻谷中天然放射性核素U的含量显著高于非铀矿区的稻谷,铀矿区内稻谷中放射性核素U含量平均值是非铀矿区的5.30倍;但铀矿区内稻谷中放射性核素Th的含量却较非铀矿区稻谷含量低,仅为其Th含量的50%。另外,相山铀矿区内稻谷中放射性核素U和Th之间存在较为显著的线性关系,稻谷中放射性核素Th的含量随U含量的增加而升高。铀矿区内稻谷中放射性核素U含量显著高于非铀矿区的原因还有待于进一步深入研究,然而加强该领域的研究对于保证我国区域稻谷质量和食品安全是非常重要和有意义的。     

pH值对KDP晶体中散射颗粒的影响

探讨了不同pH值对KDP晶体散射颗粒的影响。结果表明,不同pH值生长条件下生长的KDP晶体中散射颗粒的尺寸、密度呈现明显差异,pH值为5.5条件下KDP晶体中散射颗粒尺寸明显变大,分布稀疏;pH值为2.0时,散射颗粒密度高,尺寸小。其原因在于形成散射的杂质颗粒的存在形式不同。     

纳米SiO_2颗粒表面修饰的有机分子在介质中的光物理行为研究

利用Sol-Gel方法投篮了单分散性很好的球型二氧化硅纳米颗粒，通过表面化 学修饰法引入了带有荧光发色团的有机分子，通过稳态光物理方法研究了纳米颗粒 表面的有机分子在水、乙醇以及阴、阳离子表面活性剂悬浮液中的光物理行为。实 验表明，纳米颗粒表面有机分子的分散状态是决定其光物理行为的主要因素。这一 结果为设计和开发新型“壳-核”型纳米二氧化硅荧光传感器提供了有用的参考。     

利用室温固态反应制备球霰石型CaCO3粒子

合成形态、大小及结构可人为调控的无机材料是现代材料科学的重要研究方向[1]. 借助于各类有机添加剂及模板剂的调控作用, 可利用溶液合成方法制备出形貌与结构受到有效调控的无机粒子[2,3]. 室温固态化学反应已被成功地应用于多种无机纳米粒子[4]及纳米线[5]的合成, 并显示出高效、节能、无污染和操作简便等优点, 因而在材料合成领域具有应用前景[6].     

Core/shell particles containing 3-(methacryloxypropyl)-trimethoxysilane in the shell: synthesis, characterization, and application

In comparison to the corresponding single-component counterparts, core/shell particles are widely used due to their better physical and chemical properties. The surface properties of core/shell particles evidently play an important role in the process of application. It is easy to deduce that surface properties mostly depend on the properties of the component in the shell. Therefore, desirable materials of shell are very significant for the study of composite materials, especially in core/shell field. It is well known that polysiloxane has excellent properties, such as the water repellency, high flexibility, low surface energy, and biocompatibility. Its application, however, is limited due to poor cohesiveness and poor film-forming properties. Recently, much endeavor has been made to overcome such flaws. It is found that polyacrylate is commonly considered for its good cohesiveness and excellent film-forming property. The combination of polysiloxane and polyacrylate has been shown to be important in the composite material field, especially as core/shell particles. Unfortunately, their hydrophobicity is considerably different and thus, the core/shell particles consisting of polyacrylate (PA)/polysiloxane (PSi) are hard to prepare by general seeded emulsion polymerization, and are also scarcely available in the literature. In this study, the new core/shell PA/PSi particles with poly(butyl methacrylate) (PA) as the core and poly(3-(methacryloxypropyl)-trimethoxysilane) (PSi) as the shell were prepared by dispersion polymerization under the kinetically controlled conditions. The characterization of the particles by TEM, DSC, particle size analyzer as well as static contact angle confirmed the formation of core/shell structure. The application of core/shell (PA/PSi) particles also has been considered and discussed here.TEM micrographs of core/shell (PA/PSi) particles.     

润湿剂促进燃煤细颗粒声波团聚脱除的实验研究

在声波团聚室中研究了润湿剂液滴与细颗粒碰撞团聚脱除特性,提出了一种利用润湿剂促进细颗粒在声波场中捕集的新方法。结果表明,不同润湿剂溶液对细颗粒在声波场中的团聚脱除效果存在较大差异,采用JFC和FS-310润湿剂溶液时,细颗粒分级脱除效率与采用水时的分级脱除效率相近。而SDS和Silanol w22溶液,则可有效提高细颗粒在各粒径段的分级脱除效率。细颗粒在声波场中的脱除效率与润湿剂润湿性能具有很好的相关性,随润湿剂对细颗粒相对接触角增大而降低,在声压级为150 dB时,相对接触角由83°降低到0°,细颗粒脱除效率提高了18%,在无声场作用下,脱除效率仅提高了5%。细颗粒脱除效率随声压级的增大而提高,在低声压级条件下,添加润湿剂可有效提高细颗粒脱除效率,声压级在130 dB时,添加SDS溶液液滴后细颗粒脱除效率比声场单独作用时的脱除效率提高了25%。表明添加润湿剂可有效提高细颗粒在声波场中的团聚脱除效率,实现在低声压级条件下,获得高的细颗粒脱除效率。     

Field-flow fractionation in microfluidic channels of low aspect ratio

The shape of the steady-state three-dimensional flow velocity profile established in carrier liquid flowing inside the rectangular cross-sectional channel for field-flow fractionation should be taken into account to optimize the separation. The central parts of this profile in the planes parallel to the main channel walls are flat with almost identical flow velocities which drop down to zero at the side walls. The separated species transported by the flow in the close-to-side walls regions move with lower average velocities compared to the species transported in the central part of the channel and are undesirably broadened. The hydrodynamic splitting of the carrier liquid at the entry of the channel where the sample is injected only into the central part of the channel eliminates the excessive zone broadening. The aspect ratio of the breadth to the thickness of the channel ratio can thus be reduced. The effect of various aspect ratios on the shape of the flow velocity profile is calculated and the results are used to optimize the aspect ratio of microfluidic channels. The experiments carried out by microthermal field-flow fractionation confirmed that the aspect ratio cannot be reduced to a value of 1, proposed by other authors.     

纳米SiO2/十二烷基氨基丙酸钠协同稳定的pH响应性Pickering乳状液

用纳米SiO₂颗粒与微量氨基酸型两性表面活性剂十二烷基氨基丙酸钠作复合乳化剂, 以正癸烷为油相, 制备了pH响应性O/W型Pickering乳状液. 室温下该乳状液在pH≤4.0 时稳定, 在pH≥6.0时不稳定, 因此, 可以通过改变水相的pH值使乳状液在稳定和破乳之间多次循环. 在酸性水介质中, 氨基酸型两性表面活性剂分子呈阳离子状态, 可通过静电作用吸附到带负电荷的SiO₂颗粒表面, 产生原位疏水化作用, 使其转变为表面活性颗粒; 而在中性和碱性水介质中, 氨基酸型两性表面活性剂呈两性或阴离子状态, 不能产生原位疏水化作用, 因而导致乳状液破乳. 相关作用机理通过吸附量、 Zeta电位及接触角等实验数据得以论证. 该刺激-响应性Pickering乳状液在乳液聚合、 油品输送以及燃料生产等领域具有重要的应用价值.     

Electrochemical Selective Determination of Uranyl Ions Using PVC Membrane Sensor

A UO₂²⁺‐PVC membrane electrode was constructed using 2‐thenoyltrifluoroacetone as ionophore and its electrochemical response performance was characterized. The effect of membrane composition on the electrode performance was studied and best results were obtained using dioctylsebacate as a mediator and potassium tetrakis(4‐chlorophenyl)borate as anion excluder. The optimized UO₂²⁺‐sensor exhibited a Nernstian response with a slope of 29.5±0.5 mV decade⁻¹ over the concentration range 5.0×10⁻⁷−1.0×10⁻¹ mol L⁻¹ at 25 °C with a detection limit of 3.1×10⁻⁷ mol L⁻¹. The optimized electrode showed very good selectivity towards UO₂²⁺ relative to a wide variety of other cations and fast response time. Surface morphology of the optimized membrane electrode at different stages of its development and use was investigated and discussed. Quantum chemical calculations for geometrical optimization of the ionophore were carried out to investigate the interaction between the ionophore and UO₂²⁺ using DFT B3LYP/6‐31++G(d,p) level of theory and the obtained data confirmed the proposed response mechanism. The developed sensor was successfully applied for UO₂²⁺ selective determination in real water samples and the obtained results were compared to those obtained by spectrophotometric method indicating no significant difference.     

A Protein‐Based Encapsulation System with Calcium‐Controlled Cargo Loading and Detachment

Protein‐based encapsulation systems have a wide spectrum of applications in targeted delivery of cargo molecules and for chemical transformations in confined spaces. By engineering affinity between cargo and container proteins it has been possible to enable the efficient and specific encapsulation of target molecules. Missing in current approaches is the ability to turn off the interaction after encapsulation to enable the cargo to freely diffuse in the lumen of the container. Separation between cargo and container is desirable in drug delivery applications and in the use of capsids as catalytic nanoparticles. We describe an encapsulation system based on the hepatitis B virus capsid in which an engineered high‐affinity interaction between cargo and capsid proteins can be modulated by Ca²⁺. Cargo proteins are loaded into capsids in the presence of Ca²⁺, while ligand removal triggers unbinding inside the container. We observe that confinement leads to hindered rotation of cargo inside the capsid. Application of the designed container for catalysis was also demonstrated by encapsulation of an enzyme with β‐glucosidase activity.