Investigation of Uranium(VI) Extraction Mechanisms from Phosphoric and Sulfuric Media by 31P-NMR

Uranium extraction using DEHCNPB (butyl-1-[N,N-bis(2-ethylhexyl)carbamoyl]nonyl phosphonic acid, a bifunctional cationic extractant) has been studied to better understand mechanism differences depending on the original acidic solution (phosphoric or sulfuric). Solvent extraction batch experiments were carried out and the organic phases were probed using ³¹P-NMR. This technique enabled to demonstrate that phosphoric acid is poorly extracted by DEHCNPB ([H₃PO₄]_org < 2mM), using direct quantification in the organic phase by ³¹P-NMR spectra integration. Moreover, in the presence of uranium in the initial phosphoric acid solution, uranyl extraction by DEHCNPB competes with H₃PO₄ extraction.Average stoichiometries of U(VI)-DEHCNPB complexes in organic phases were also determined using slope analysis on uranium distribution data. Uranium seems to be extracted from a phosphoric medium by two extractant molecules, whereas more than three DEHCNPB on average would be necessary to extract uranium from a sulfuric medium. Thus, uranium is extracted according to different mechanisms depending on the nature of the initial solution.     

Stress‐Transfer‐Induced In Situ Formation of Ultrathin Nickel Phosphide Nanosheets for Efficient Hydrogen Evolution

Ultrathin two‐dimensional (2D) nanostructures have attracted increasing research interest for energy storage and conversion. However, tackling the key problem of lattice mismatch inducing the instability of ulreathin nanostructures during phase transformations is still a critical challenge. Herein, we describe a facile and scalable strategy for the growth of ultrathin nickel phosphide (Ni₂P) nanosheets (NSs) with exposed (001) facets. We show that single‐layer functionalized graphene with residual oxygen‐containing groups and a large lateral size contributes to reducing the lattice strain during phosphorization. The resulting nanostructure exhibits remarkable hydrogen evolution activity and good stability under alkaline conditions.     

Synthesis and characterization of uranium (IV) complexes with various amino acids

Complexes of uranium in its IV oxidation state, using cysteine, glycine, serine and aspartic acid as ligands, have been synthesized. Semi-microanalysis of the complexes indicate 1:1 metal to ligand ratio for all the synthesized complexes. Infrared spectra of solid complexes have been employed to establish the groups, coordinated to the metal ion. Effective magnetic moment of the complexes were also estimated.     

Surgénérateurs ; l'état des matériaux aux hautes irradiations, hautes puissances locales et températures, leurs gradients et propriétés mécaniques adaptées aux contraintes qui en résultent

The motivations to realize nuclear breeder reactors are developed in the present context of a strong growth in electronuclear power stations in many countries, using mostly moderated and water cooled reactors.The past studies can be of a substantial profit in France and, to a lesser degree, in other countries of the EU. However, to use fully the 238 uranium isotope, the materials for these breeders must withstand much harder radiation than those for water reactors. The power densities and thermal gradients will also be much more intense. The mechanical stresses, both static and dynamic, will be large and will act on materials with altered mechanical properties. Fuel elements will have to be produced with materials already irradiated several times and therefore showing such alterations.A field of studies concerning materials and their mechanical behavior in new and severe conditions is sketched here, both in construction and working conditions, together with proposed necessary instrumentation and research orientations.     

Nickel(II) complexes bearing pyrazolylimine ligand: synthesis,structure, and catalytic properties for vinyl‐type polymerization of norbornene

Two nickel(II) complexes of {2‐[C₃HN₂(R₁)₂‐3,5]}[C(R₂)?N(C₆H₃ⁱPr₂‐2,6)]NiBr₂ (complex 1 : R₁ = CH₃, R₂ = 2,4,6‐trimethylphenyl; complex 2 : R₁ = R₂ = Ph) were synthesized and characterized. The solid‐state structure of complex 1 has been confirmed by X‐ray single‐crystal analysis. Activated by methylaluminoxane (MAO), complexes 1 and 2 are capable of catalyzing the polymerization of norbornene with moderate activities [up to 10.56 × 10⁵ gPNBE (mol Ni h)^?1] with high molecular weights (M_w?13.56 × 10⁵ g mol^?1) and molecular weight distributions were around 2. The influences of polymerization parameters such as reaction temperature and Al–Ni molar ratio on catalytic activity and molecular weight of the polynorbornene were investigated in detail. The obtained polynorbornenes were characterized by means of ¹H‐NMR and FTIR techniques. The analytical results of polymer structures indicated that the norbornene polymerization is vinyl‐type polymerization rather than ROMP. Copyright © 2009 John Wiley & Sons, Ltd.     

Kinetics and Mechanism of Catalytic Reduction of U(VI) with Hydrazine on Platinum Catalysts in Nitric Acid Media

The kinetics of U(IV) produced by hydrazine reduction of U(VI) with platinum as a catalyst in nitric acid media was studied to reveal the reaction mechanism and optimize the reaction process. Electron spin resonance (ESR) was used to determine the influence of nitric acid oxidation. The effects of nitric acid, hydrazine, U(VI) concentration, catalyst dosage and temperature on the reaction rate were also studied. In addition, the simulation of the reaction process was performed using density functional theory. The results show that the influence of oxidation on the main reaction is limited when the concentration of nitric acid is below 0.5 mol/L. The reaction kinetics equation below the concentration of 0.5 mol/L is found as: -dc(UO₂²⁺)/dt)=kc^0.5323(UO₂²⁺)c^0.2074(N₂H₅⁺)c^-0.2009(H⁺). When the temperature is 50 ℃, and the solid/liquid ratio r is 0.0667 g/mL, the reaction kinetics constant is k=0.00199 (mol/L)^0.4712/min. Between 20 ℃ and 80 ℃, the reaction rate gradually increases with the increase of temperature, and changes from chemically controlled to diffusion-controlled. The simulations of density functional theory give further insight into the influence of various factors on the reaction process, with which the reaction mechanisms are determined according to the reaction kinetics and the simulation results.     

Assembly of ϵ-Keggin Polyoxometalate from Molecular Crystal to Zeolitic Octahedral Metal Oxide

Zeolitic octahedral metal oxides are inorganic crystalline microporous materials with adsorption and redox properties. New ϵ-Keggin nickel molybdate–based zeolitic octahedral metal oxides have been synthesized. ³¹P NMR spectroscopy shows that reduction of Mo^VI-based molybdates forms an ϵ-Keggin polyoxometalate that immediately transfers to the solid phase. Investigation of the formation process indicates that a low Ni concentration, insoluble reducing agent, and long synthesis time are the critical factors for obtaining the zeolite octahedral metal oxides rather than the ϵ-Keggin polyoxometalate molecule. The synthesized zeolitic nickel molybdate with Na⁺ is used as the adsorbent, which effectively separates C₂ hydrocarbon mixtures.     

Development of a Chitosan/Nickel Phthalocyanine Composite Based Conductometric Micro-sensor for Methanol Detection

Thin-film composite of chitosan/nickel phthalocyanine (NiPc) was electrochemically deposited on the fingers of interdigitated gold electrodes, applying chronoamperometric polymerization technique. The presence of crystallized NiPc in the chitosan was confirmed by EDX and FTIR analysis. Acetone, ethanol, and methanol gas-sensing properties of the films prepared at optimum conditions were studied at atmospheric temperature, through differential measurements at an optimized frequency of 10 kHz, using a lock-in amplifier. The conductometric sensor presents the highest sensitivity of 60.2 μS.cm⁻¹(v/v) for methanol and 700 ppm as the limit of detection. For validation, the methanol content of a commercial rubbing alcohol was determined.