Identification of irradiated foods by monitoring radiolytically produced hydrocarbons

Many countries allow the treatment of foods with low doses of ionizing radiation to reduce microbial and insect infestations, inhibit maturation, and extend shelf life. Therefore, a reliable method is needed to identify irradiated foods and to determine their compliance with respect to allowable absorbed radiation dose. Several approaches for the identification of irradiated foods have been developed such as measurement of radiolytic products, chemiluminescence, and thermoluminescence, and the use of electron spin resonance spectroscopy to measure free radicals trapped in bone. A method for the determination of radiolytically produced hydrocarbons was developed in our laboratory to evaluate the utility of monitoring these compounds as indicators of food irradiation. The method involves the extraction of the radiolytic hydrocarbons from foods and their quantitation by gas chromatography. Concentrations of the radiolytically produced hydrocarbons increased linearly with radiation doses ranging from 0 to 6 kGy. The limit of detection appears to be approximately 1 kGy. The method was found to be useful for the identification of gamma-irradiated foods such as shrimp, frog legs, pork, beef, and poultry. Results of the method evaluation studies of these food matrices as well as factors affecting hydrocarbon production and determination will be presented.     

Single cell manipulation, analytics, and label-free protein detection in microfluidic devices for systems nanobiology

Single cell analytics for proteomic analysis is considered a key method in the framework of systems nanobiology which allows a novel proteomics without being subjected to ensemble-averaging, cell-cycle, or cell-population effects. We are currently developing a single cell analytical method for protein fingerprinting combining a structured microfluidic device with latest optical laser technology for single cell manipulation (trapping and steering), free-solution electrophoretical protein separation, and (label-free) protein detection. In this paper we report on first results of this novel analytical device focusing on three main issues. First, single biological cells were trapped, injected, steered, and deposited by means of optical tweezers in a poly(dimethylsiloxane) microfluidic device and consecutively lysed with SDS at a predefined position. Second, separation and detection of fluorescent dyes, amino acids, and proteins were achieved with LIF detection in the visible (VIS) (488 nm) as well as in the deep UV (266 nm) spectral range for label-free, native protein detection. Minute concentrations of 100 fM injected fluorescein could be detected in the VIS and a first protein separation and label-free detection could be achieved in the UV spectral range. Third, first analytical experiments with single Sf9 insect cells (Spodoptera frugiperda) in a tailored microfluidic device exhibiting distinct electropherograms of a green fluorescent protein-construct proved the validity of the concept. Thus, the presented microfluidic concept allows novel and fascinating single cell experiments for systems nanobiology in the future.     

Determination of thiol by high-performance liquid chromatography and fluorescence detection with 5-methyl-(2-(<Emphasis Type="Italic">m</Emphasis>-iodoacetylaminophenyl)benzoxazole

A new high-performance liquid chromatographic (HPLC) method for measuring low molecular weight (LMW) thiol-containing compounds, including cysteine (CysH), glutathione (GSH), N-acetylcysteine (Nac), penicillamine (PA), and 2-mercaptoethanol (2-ME), has been developed by using 5-methyl-(2-(m-iodoacetylaminophenyl)benzoxazole (MIPBO) as fluorescence-labeling reagent. The derivatization and separation conditions have been investigated in detail. Detection limits ranging from 3.5 to 15.0 fmol were achieved for the thiols investigated in a 16 min separation with detection wavelengths 310 and 375 nm for the excitation and emission, respectively. The utility of the proposed method has been validated by measuring CysH in human urine samples.     

Quantification of volatile PAHs present at trace levels in air flow by aqueous trapping—SPE and HPLC analysis with fluorimetric detection

In the context of a European project, a new approach of sampling of volatile polycyclic aromatic hydrocarbons (PAHs) from air was developed. In fact, the aim of this project was to test the efficiency of an air cleansing prototype reactor, which was operating by non-thermal plasmolysis. With an eye to model the atmosphere ejected by the prototype, we needed to vaporise the volatile PAHs in an air stream at concentrations as low as those recommended by European Directives (96/62/CE) for PAHs in ambient air (i.e. 1 ng m⁻³). Our strategy was based on the analysis of PAHs trapped in an aqueous medium, in order to avoid important losses of volatile compounds observed during the delicate desorption-concentration step when classical solid supports are used. Then a study was carried out to determine: the design of the collecting part, the flow-rate of the air sampling, the nature and concentration of chemical additives used to enhance PAH solubility in water. The very highly diluted aqueous media obtained after the bubbling step were concentrated by solid-phase extraction (SPE) on hydrophobic cartridges and analysed on-line by reversed-phase HPLC with UV and fluorimetric detections. Lastly, the sampling technique was directly applied to the outlet of the air cleansing prototype and the analysis after 3-6 h of non-thermal plasmolysis showed that the target volatile PAHs were not present in an air stream initially polluted by volatile organic compounds.     

A simple and simultaneous determination of acyclovir and ganciclovir in human plasma by high-performance liquid chromatography

A simple high-performance liquid chromatographic method was developed for the simultaneous determination of the therapeutic levels of acyclovir and ganciclovir in human plasma. After precipitation of plasma proteins with 6% perchloric acid, acyclovir and ganciclovir were simultaneously determined by reversed-phase chromatography with spectophotometric detection at 254 nm. The peak heights for acyclovir and ganciclovir were linearly related to their concentrations ranging from 0.063 to 2.080 micro g/mL. The recovery was 100.48-102.84% for acyclovir and 99.26-103.07% for ganciclovir. The intra- and inter-day relative standard deviation values were in the range 0.186-8.703% for acyclovir and 0.137-6.424% for ganciclovir. The detection limits for both compounds were 0.01 micro g/mL determined as the signal-to-noise ratio of 3. The present method is applicable to therapeutic monitoring during antiviral medication.     

Electron capture detector response to low electron affinity aromatic hydrocarbons using positive ion stabilization and alkyl chloride sensitization

The electron capture detector (ECD) response to numerous aromatic hydrocarbons of low electron affinity (EA) is shown to be detrimentally affected by two processes which compete with and typically overwhelm the electron capture reactions of these molecules. It is shown that the effects of these two undesired reactions can be eliminated by the permanent addition of trimethylamine and one of several alkyl monochlorides to the detector make-up gas. These modifications of the detector gas result in greatly increased sensitivity, increased linearity, and increased reproducibility of response. A kinetic model for the ECD responses of low EA resonance capture molecules is developed which appears to explain these improvements.     

玻璃基片上纳米碳管电极的集成

利用微波等离子体化学气相沉积法在玻璃孔穴中定位生长纳米碳管电极, 分析了负偏压对纳米碳管电极生长的影响. 该电极对铜离子的电化学检测性能分析结果表明, 所制备的纳米碳管电极具有良好的电化学检测性能, 位于－0.0100 V附近的铜离子的还原峰峰形良好, 其电流在铜离子浓度为0.01~0.30 mmol•L^-1时, 与Cu²⁺浓度呈良好的线性关系, 相关系数为0.9975, 且具有较好的长期稳定性和重现性.     

Separation and Determination of Clenbuterol,Cimaterol and Salbutamol by Capillary Electrophoresis with Amperometric Detection

Capillary electrophoresis with amperometric detection was applied to determine some β₂‐agonists, such as clenbuterol, cimaterol and salbutamol in this paper. The working electrode used was a 0.3 mm diameter carbon disk electrode. In this work, the pH 6.0–6.4 borax‐potassium dihydrogen phosphate was used as running buffer (150 mmol/L), 10 kV as the separation voltage and 1.05 V (vs. Ag/AgCl, 3 mol/L KCl) as the detection potential. Under the optimum conditions, the analytes were baseline separated within 16 min. Linear range for cimaterol, clenbuterol and salbutamol was 1.0–2000, 2.0–2000 and 1.0–2000 ng/mL, respectively. The detection limits (define as 3σ/k) were 0.5, 1.0 and 0.4 ng/mL for cimaterol, clenbuterol and salbutamol, respectively. The developed method has been applied to determine these three analytes in feed and urine by standard addition. The mean recoveries for these three analytes ranged from 89.0% to 102.0%.     

Hydrodynamic Radius Characterization of a Vinyl-Type Polynorbornene by Size-Exclusion Chromatography with a Static and Dynamic Laser Light Scattering Detector

Both absolute molecular weight and molecular sizes (radius of gyration and hydrodynamic radius) of a vinyl-type polynorbornene eluting from size-exclusion chromatography columns were determined by combined with a static and dynamic laser light scattering detector. The hydrodynamic radius of polymer fraction eluting from size-exclusion chromatography columns was obtained from dynamic laser light scattering measurements at only a single angle of 90° by introducing a correction factor. According to the scaling relationship between molecular sizes and molecular weight and the ratio between radius of gyration and hydrodynamic radius, the vinyl-type polynorbornene took a random coil conformation in 1,2,4-trichlorobenzene at 150 °C.