Ni-SDC固体氧化物燃料电池阳极的合成和性质

采用柠檬酸-硝酸盐溶胶-凝胶低温自蔓延燃烧法制备氧化镍（NiO）粉末和Ce0.8Sm0.2O1.9（SDC）粉末，并将NiO与SDC按不同质量比和不同制备工艺制备了固体氧化物燃料电池（SOFC）的阳极前身。再用自组装的还原装置将其在820℃经2．5h还原后，采用四端子法测量其电导率值。分析了阳极片电导率与阳极片微结构、Ni的质量百分数、混合研磨时间及烧结温度之间的关系。结果显示，阳极片的电导率强烈依赖于镍含量和制备工艺。     

长光路光度法测定中药材中痕量硒

本文研究了用长光路光度法测定痕量硒。在酸性溶液中，Ｓｅ（Ⅳ）催化ＫＣｌＯ３氧化苯肼成偶氮离子，继而与变色酸生成红色偶氮化合物。硒含量在１．０×１０－９～２．０×１０－７ｇ／ｍＬ范围内遵守比尔定律。巯基棉分离后，测定中药材中总硒，获得满意结果。     

壳聚糖固体聚合物电池用膜

壳聚糖是甲壳素脱乙酰基的产物，具有良好的成膜性、生物相容性、环保以及价格低廉等特点。作为一种碱性高分子膜材料，近年来已成为聚电解质研究领域中的研究热点。本文综述了壳聚糖固体聚合物电池用膜的研究现状，其改性工艺主要包括共混、化学改性、质子酸掺杂、无机盐掺杂等方法，比较了各种工艺处理后壳聚糖固体聚合物电解质膜的性能差异，并就壳聚糖固体聚合物电解质膜中离子传导机理中有待解决的问题进行探讨，并提出了进一步改进壳聚糖固体聚合物电解质膜性能的研究思路。     

Synthesis and Crystal Structure of 3,3′-(Hexane-1,6-diyl)bis(1-acetyl-5,5-dimethylhydantoin),a New Inducer of Differentiation

1 INTRODUCTION Hexamethylenebis[acetamide] (HMBA) is an effective agent in phaseⅡclinical trial[1] that induces differentiation of certain types of tumors to nonmalignant phenotypes. In an attempt to discover more efficient inducers, a number of derivatives of HMBA have been synthesized and evaluated in vitro[2, 3]. The results proved that increasing the number of functional groups could enhance the anticancer activity. In addition, it was evident that compounds with six methylene i…     

卟啉类光敏剂在染料敏化太阳能电池中的应用

染料敏化太阳能电池结合了染料光敏剂和无机半导体的优势，具有较宽的光谱响应范围，制造工艺简单、成本较低，对环境友好，应用前景广阔，因而备受人们的关注。本文以卟啉配合物为主线，介绍光敏太阳能电池的基本构造和光电原理，从改善电池性能的角度，综述了各种卟啉类光敏剂在染料太阳能电池中的应用，讨论了卟啉配合物及其超分子结构对光电转化率的影响机理。     

Tumor cell detection method using complement-mediated cytolytic reaction and imaging sensor system

A novel tumor-detection system consisting of complementmediated cytolytic reaction and an image processing system was developed for the simple and rapid determination of tumor cells. The present system consists of a CCD image sensor, image memory board, personal computer, and microscope. When monoclonal antibody 3C4, which is specific to the guinea pig hepatoma L-10, was added to cell suspension, only L-10 cytolysis occurred. Cytolysis caused a decrease in brightness of the cells observed by phase-contrast microscopy. The phase contrast image of the cells before cytolysis was converted to a digitalized signal and stored in computer memory. After cytolysis, a brightness threshold above that of lysed cells was subtracted from the digitalized signal and compared to the signal stored before reaction. L-10 cells in mixed cell suspension were determined specifically by the system. Measurement time was only 2 sec and overall time, including reaction time, was approximately 30 min. Since this method does not require a cell washing process, automation of the whole system is possible.     

Growth kinetics and phenolics production inGlycine Max cell suspension cultures

Glycine max was used as a model plant cell suspension culture to establish relationships among growth kinetics, phenolics production, elicitor action, and peroxidase activity. Timing of elictor addition through monitoring of peroxidase provided an excellent means of optimizing yields of phenolics and reduced the time span during which phenolics were formed, negating the need for a secondary production medium. We have also determined that calcium and other cellular effectors like polyamines and organic osmolytes, when used in conjunction with elicitors, enhance phenolics production. Calcium directly enhanced elicitation, whereas polyamines and other osmolytes such as glycerol and proline extended cell viability. The study also demonstrated potential for enhancing secondary metabolite production by a combination of elicitation, cell viability stabilizers, and by addition of nutrients at the time of elicitation.     

Effect of Ba and Bi doping on the synthesis and sintering of Ge-based apatite phases

Recently, high oxide ion conduction has been observed in the apatite-type systems La_9.33+x(Si/Ge)₆O_26+x/2, with conductivities approaching and even exceeding that of yttria-stabilized zirconia. The Ge-based phases have been reported to suffer from Ge loss and undergo irreversible structural changes on sintering at the high temperatures required to obtain dense pellets. In this paper we discuss doping studies (Ba, Bi for La) aimed at stabilizing the hexagonal apatite lattice to high temperature, and/or lowering the synthesis and sintering temperatures. The results show that doping with Ba helps to stabilize the hexagonal lattice at high temperatures, although Ge loss appears to still be a problem. Conductivity data show that, as previously reported for the Si-based systems, non-stoichiometry in the form of cation vacancies and/or oxygen excess is required to achieve high oxide ion conduction in these Ge-based systems. Neutron diffraction structural data for the fully stoichiometric phase La₈Ba₂Ge₆O₂₆ shows that the channel oxygen atoms show little anisotropy in their thermal displacement parameters, consistent with the low oxide ion conductivity of this phase. Bi doping is shown to lower the synthesis and sintering temperatures, although the presence of Bi means that these samples are not stable at high temperatures under reducing conditions.Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, April 10–12, 2003     

Nickel-cermet anode for fuel cells with the LSGM electrolyte

The effect of some technological parameters (firing temperature, thickness of an interphase layer made of solid electrolyte Ce_0.82Gd_0.18O_1.91 (GDC), the GDC electrolyte amount in nickel-cermet) on the electrochemical and electric properties of a nickel-cermet (Ni-GDC) anode intended for fuel cells with the La_0.88Sr_0.12Ga_0.82Mg_0.18O_2.85 (LSGM) electrolyte is studied. The polarization resistance of such an electrode is shown to hardly depend on the thickness of the interphase layer (4.5–23.5 μm) and the GDC electrolyte amount in nickel-cermet and to increase with the anode firing temperature. It is established that the contact resistance is concentrated in cells with the developed nickel-cermet electrode at the GDC/LSGM interface. At a temperature of 700°C the developed anodes may ensure a current density of 1 A cm^?2 at an overvoltage of less than 100 mV when using both moist hydrogen and a methane-oxygen mixture as the fuel.     

CuZnAl水滑石衍生催化剂上甲醇水蒸气重整制氢Ⅲ.合成水滑石用金属盐的影响

采用共沉淀法,用不同金属盐为Cu源和Zn源合成了一系列CuZnAl水滑石,以此为前体经600℃焙烧后制得相应催化剂.用硝酸盐和醋酸盐合成的水滑石结晶度高,其衍生催化剂比表面积大、Cu的分散性好且易于还原;而用硫酸盐和盐酸盐合成的水滑石结晶度差,其衍生催化剂比表面积小、Cu的分散性差且不易还原.反应评价结果显示,用硝酸盐和醋酸盐制得的催化剂活性高、反应稳定性好;而用硫酸盐和盐酸盐制得的催化剂由于低的Cu表面积以及S和Cl的毒化作用而几乎无催化活性.在醋酸盐制备的催化剂上,产物干气中CO的浓度明显较低,在250℃和WHSV=3.28 h-1的条件下约为0.03%~0.04%,仅为硝酸盐所制催化剂上CO浓度的1/5;在210℃和WHSV=0.5 h-1的条件下,该催化剂上甲醇几乎完全转化,同时CO浓度降至约0.005%.N2O滴定、CO2程序升温脱附和程序升温还原结果显示,用醋酸盐和硝酸盐制备的催化剂具有极相近的Cu表面积和表面碱性,但前者CuO的还原峰温较后者低近70℃,归因于ZnO与CuO间的强相互作用,这是催化剂具有良好选择性的可能原因.