精制煤液化中油加氢裂化制取喷气燃料的研究

在实验室固定床反应装置上,选用Mo-Ni-P/Si-Al工业催化剂,对精煤液化中油进行了加氢裂化制取喷气燃料的实验。考察了反应温度、空速对芳烃加氢转化及产品馏分分布的影响。通过加氢裂化,降低了油品芳烃含量,提高了喷气燃料馏分的收率。在总压为15MPa,反应温度为350—360℃,空速为0.8—1.0h~(-1)条件下,获得了芳烃含量低于10w%的低结晶点的优质喷气燃料产品。并对煤液化中油制取的喷气燃料的组成和性质进行了分析和评价。     

Photoinduced electron transport process in electrochemical cell I. Phenomenological description

The process of electron transport plays an essential role in the fundamental phenomena of life like photosynthesis, respiration and vision as well as in photoelectronic devices. However, the molecular mechanisms of the electron way and factors governing the transport rate in such systems are still unclear. Several groups have reported theoretical approaches for searching the mechanisms by using statistical mechanics, coherent dynamics and quantum mechanics. The current density vector inside the semiconducting layer is determined. In this paper we consider the problem of transport of electron promoted in the electrochemical cell constructed of two electrodes with the dye molecules immersed in. We describe the process of electron promotion by refractive light wave on the vacuum–semiconductor boundary as well as on the semiconducting electrode and the dye molecule layer in terms of extended phenomenological electrodynamics formalism. The results of our theoretical model show that such a theoretical approach will give more information on the mechanism of electron transport and will give insight in the determination of some electric features of materials.     

Characterization of SiO2-P2O5-ZrO2 Sol-Gel/NAFION™ Composite Membranes

Composite membranes were prepared by (a) infiltrating NAFION with SiO₂-P₂O₅-ZrO₂ sol, and (b) recasting a film using NAFION solution containing SiO₂-P₂O₅-ZrO₂ sol. The membranes were characterized by Differential Thermal Analysis and ac-impedance spectroscopy as a function of relative humidity. The influences of the heat treatment (80°C–150°C) and cleaning on the electrical properties were investigated. The incorporation of SiO₂-P₂O₅-ZrO₂ gels into NAFION lead to improvements in its thermal stability and proton conductivity.     

A comparison of double-focusing sector field ICP-MS, ICP-OES and octopole collision cell ICP-MS for the high-accuracy determination of calcium in human serum

Human serum is routinely measured for total calcium content in clinical studies. A definitive high-accuracy and low-uncertainty method is required for reference measurements to underpin medical diagnoses. This study presents a novel octopole collision cell ICP-MS, high-accuracy, methodology and comparison of that technique with double-focusing sector field ICP-MS and an ICP-OES method. Double-matched isotope dilution mass spectrometry (IDMS) was employed for ICP-MS techniques and an exact matching bracketing technique using scandium as an internal standard was used for ICP-OES analysis. Medium resolution mode was utilised for double-focusing sector field ICP-MS analysis to resolve the dominant interferences on the ⁴⁴Ca/⁴²Ca isotope pair. Hydrogen reaction gas was employed to chemically resolve a number of polyatomic interferences predominantly through charge transfer reactions in the octopole collision cell. Comparison data presented for NIST CRM 909b human serum analysis from all three techniques demonstrates highest accuracy (99.6%) and lowest uncertainty (1.1%) for octopole collision cell ICP-MS. Data from ICP-OES using a non-IDMS technique produces comparably accurate data and low-uncertainties. The much higher total expanded uncertainties for double-focusing sector field ICP-MS compared with octopole collision cell data are explained by lower precision on the measurement of the ⁴⁴Ca/⁴²Ca isotope ratio. Data for octopole collision cell ICP-MS submitted for an international blind trial comparison (CCQM K-14) demonstrated excellent agreement with the mean of all participants with a low expanded uncertainty.     

Vascular endothelial and smooth muscle cell culture on NaOH-treated poly(epsilon-caprolactone) films: a preliminary study for vascular graft development

Tissue engineering offers the potential of providing vessels that can be used to replace diseased and damaged native blood vessels. The endothelization of a synthetic vascular graft minimizes the failures associated with blood clotting and platelet activation. The aim of this study was to culture vascular-derived endothelial and smooth muscle cells on both untreated and NaOH-treated poly(epsilon-caprolactone) (PCL) films, a biocompatible and bio-resorbable polymer, and to evaluate the behavior of both cell types as a preliminary study for vascular graft development. PCL films were prepared by hot pressing; characterized by DSC, IR, SEM, and scanning force microscopy; and treated with NaOH to increase the surface hydrophilicity before cell culture. Endothelial and smooth muscle cells, isolated from pig cava vein, were characterized by immunofluorescence and confocal microscopy studies of endothelial nitric oxide synthase and alpha-smooth muscle actin. Good adhesion, growth, viability and morphology of both the endothelial and smooth muscle cells on PCL films were obtained, but a light stimulation of mitochondrial activity was observed during short culture times. NaOH treatment improved the adhesion and enhanced the proliferation in both cell types. This verified the possible use of this modified polymer as a support in the preparation of a synthetic vascular graft. [Diagram: see text] SEM micrograph of smooth muscle cells cultured on NaOH-treated PCL film. (Original magnification: 1000x).     

Characterization of fuel samples by on-line LC-GC with automatic group-type separation of hydrocarbons

Characterization of fuels by LC-GC is possible by use of automatic successive transfer (multiple transfer) of HPLC fractions to a GC via an on-column interface. This paper describes the instrumentation and the methodology for the HPLC separation of the hydrocarbons (aliphatic and aromatic) into separate groups and the on-line transfer of these groups to a capillary GC column. Two HPLC methods were used with the same valve configuration: single column (silica) with column back-flush to detector; and double column (silica and amino-bonded silica) with multiple fraction transfer and back-flush. The first method was used for the analysis of total saturated compounds and total aromatic compounds; the second was used for the separation of the one-, two-, three-, and four-ring aromatic compounds present in diesel fuels. Examples are shown of the characterization of diesel fuels, and the repeatability of the data.     

6AZO-CONTAINING SELF-ASSEMBLY ULTRA-THIN FILMS AND THEIR PHOTOVOLTAIC PROPERTIES

A kind of azo-containing resin (Azo-R) was synthesized by a simple way through the coupling reaction of 2-nitro-N-methyldiphenylamine-4-diazoresin (NDR) with phenol, and a new covalentely attached multilayer film from Azo-R as H-donor and photosensitive diazoresin, diphenylamine-4-diazoresin (DR) as H-acceptor via H-bonding attraction by selfassembly technique has been fabricated. Following the decomposition of diazonium group of DR under exposure to UV light, the H-bonds between the layers of the film convert to covalent bonds and the film becomes very stable toward polar solvents or electrolyte aqueous solutions. Thus the UV-irradiated azo-containing films can be used to measure photocurrent in a conventional three-electrode photoelectrochemical cell using KCl as supporting electrolyte. It was confirmed that the azo-containing multilayer film is responsible for the photocurrent generation.     

Determination of Diffusion Coefficients for Binary Nonelectrolyte Mixtures. A Free-Volume Predictive Approach

A diaphragm cell has been used to measure mutual diffusion coefficients at 25°C for four binary nonelectrolyte mixtures: ethylbenzene + n-hexane, carbon tetrachloride + ethylbenzene, cyclohexane + p-xylene, and 1,2-dichloroethane + cyclohexane. A free-volume predictive approach for binary mutual diffusion coefficients was developed and tested. Only infinite dilution diffusion coefficients, some readily available pure substance data, and UNIFAC group contribution parameters are used in the model. No binary equilibrium thermodynamic information is required. For 73 binary systems with an overall average absolute deviation of 5.2%, it has been shown that the developed method is better than two commonly available reference methods for the prediction of liquid diffusion coefficients.     

Trace elemental determination in alcohol automotive fuel by electrothermal atomic absorption spectrometry

Suitable analytical methodologies were developed allowing direct determination of As, Cu, Fe, Pb, Sb and Sn in alcohol fuel samples by electrothermal atomic absorption spectrometry. Different chemical modification approaches were tested and compared in terms of analytical performance and in practical terms. Experimental conditions were optimized allowing little sample dilution and use of calibration curves prepared with aqueous inorganic analyte standards. Methodologies were tested with analyte spiked alcohol samples. Good analyte recoveries from spiked alcohol samples, precision better than 10% and limits of detection in the sub μg l⁻¹ range were achieved.     

Interactions between temperature-sensitive hydrogel microspheres and granulocytes

Poly(N-isopropylacrylamide) (PNIPAM) has a low critical solution temperature (LCST) at 32°C in water and the hydrophilicity changes through the LCST. The microspheres whose surface was composed of PNIPAM exhibited phase transition behavior around 32°C. Therefore, the interactions between PNIPAM micropheres and granulocytes depended on the temperature. That is, the oxygen consumption and active oxygen production by cells in contact with PNIPAM-containing microspheres and adhesion of the microspheres to the cell surface were more enhanced above the LCST of PNIPAM than below it, whereas no significant temperature dependence of cell–microspheres interaction was observed in nonthermosensitive microsphere systems. It was suggested that the function of cells could be controlled with temperature using the temperature-sensitive microspheres.