Cellulose-precursor synthesis of nanocrystalline Ce<Subscript>0.8</Subscript>Gd<Subscript>0.2</Subscript>O<Subscript>2−δ</Subscript> for SOFC anodes

Developments of intermediate-temperature solid oxide fuel cells (IT SOFCs) require novel anode materials with a high electrochemical activity at 800–1070 K. The polarization of cermet anodes, made of nickel, ceria and yttria-stabilized zirconia (YSZ) and applied onto a YSZ solid electrolyte, can be significantly reduced by catalytically active ceria additions, the relative role of which increases with decreasing temperature. Further improvement is observed when using Ce_0.8Gd_0.2O_2– (CGO) having a high oxygen ionic conductivity instead of undoped ceria, owing to enlargement of the electrochemical reaction zone. Nanocrystalline CGO powders with grain sizes of 8–35 nm were thus synthesized via the cellulose-precursor technique and introduced into Ni–CGO–YSZ cermets, and tested in contact with a (La_0.9Sr_0.1)_0.98Ga_0.8Mg_0.2O_3– (LSGM) electrolyte at 873–1073 K. The results showed that the anode performance can be enhanced by additional surface activation, in particular by impregnation with a Ce-containing solution, and also by incorporation of YSZ, which probably acts as a cermet-stabilizing component. The overpotential of the surface-modified Ni–CGO (25 wt%–75 wt%) anode in a 10% H₂/90% N₂ atmosphere was approximately 110 mV at 1073 K with a current density of 200 mA/cm².Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

Forward-scattering degenerate four-wave mixing as a potential laser-based absorption detection method in liquid separation systems: Coupling to conventional-size liquid chromatography

An explorative study on the compatibility of liquid separation systems, such as (micro) liquid chromatography (LC) and capillary electrophoresis (CE), and forward-scattering degenerate four-wave mixing (F-D4WM) as a detection method is presented. F-D4WM is a laser-based technique showing some analogy with holographic spectroscopy: a signal on a theoretical dark background is observed as a result of light absorption by an analyte. Parameters considered are solvent composition focussing on acetonitrile, methanol and water; mobile phases in LC and CE), detector cell construction, and influences of laser beam powers. A specially designed detector cell has been developed to meet the Brewster condition, both at the air-quartz and the quartz-liquid boundaries. For practical reasons, the tested cell has an optical pathlength of 1 mm; reduction to 100 μm is required to apply the cell in microseparations. The F-D4WM technique has been involved for detection in a conventional-size, reversed-phase LC separation of 1- and 2-aminoanthraquinones. The detection limit obtained (for the 1 mm cell) is 2 × 10⁻⁵ absorbance units. The experiments indicate that further reduction of background deserves explicit attention.     

Mammalian cell growth studiedin situ by fourier transform infrared spectroscopy

Fourier transform infrared techniques were used to monitor mammalian cell growth plated on attenuated total reflection (ATR) crystals. Consistently, the growth kinetics plots generated from the obtained spectra demonstrated a sigmoidal curve representing a sequence of slow, rapid, then tapering cell growth which correlated well with non-spectral cell growth determinations. Significant advantages over traditional methods of measuring cell growth kinetics are demonstrated. The technique has promising potential to be used to study events in areas such as toxicology and cell biology.     

Rheological properties of multisticker associative polyelectrolytes in semidilute aqueous solutions

Multisticker associative polyelectrolytes of acrylamide (≈86 mol %) and sodium 2‐acrylamido‐2‐methylpropanesulfonate (≈12 mol %), hydrophobically modified with N,N‐dihexylacrylamide groups (≈2 mol %), were prepared with a micellar radical polymerization technique. This process led to multiblock polymers in which the length of the hydrophobic blocks could be controlled through variations in the surfactant‐to‐hydrophobe molar ratio, that is, the number of hydrophobes per micelle (N_H). The rheological behavior of aqueous solutions of polymers with the same molecular weight and the same composition but with two different hydrophobic block lengths (N_H = 7 or 3 monomer units per block) was investigated as a function of the polymer concentration with steady‐flow, creep, and oscillatory experiments. The critical concentration at the onset of the viscosity enhancement decreased as the length of the hydrophobic segments in the polymers increased. Also, an increase in the N_H value significantly enhanced the thickening ability of the polymers and affected the structure of the transient network. In the semidilute unentangled regime, the behavior of the polymer with long hydrophobic segments (N_H = 7) was studied in detail. The results were well explained by the sticky Rouse theory of associative polymer dynamics. Finally, the viscosity decreased with an increase in the temperature, mainly because of a lowering of the sample relaxation time. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1640–1655, 2004     

Shot noise sets the limit of quantification in electrochemical measurements

Detection of single molecules, particles, and rapid redox events is a challenge of electrochemical investigations and requires either an amplification strategy or significant averaging for the electrochemical current to exceed the noise level. We consider the minimum number of electrons required to reach the limit of quantification in these electrochemical measurements. A survey of the literature indicates that the state-of-the-art limit in current detection for different types of measurements (e.g. voltammetry, single-molecule redox cycling, ion channel recordings of single molecules, metal nanoparticle collision, and phase nucleation) is independent of the nature of the measurement and increases linearly with reciprocal response time, Δt^?1, over ～5 orders of magnitude (from ～10 to ～10⁶ s^?1). We demonstrate that the practical limit of quantification requires cumulative measurement of ～2100 electrons during Δt and is determined by statistics of counting electrons, that is, the shot noise in the current.     

Effects of Lead on Temporal Response Properties of Retinal Ganglion Cells in Developing Rats

Neonatal rats have taken in lead, during the period from their parturition to their weaning, from the milk of dams fed with water containing 0.2% lead acetate solutions. The alterations in the temporal response properties of retinal ganglion cells in adult rats (90 days) following the lead exposure at their developing stage have been studied. The results of this investigation demonstrate that the lead exposure in neonatal rats causes decreases in the optimal temporal frequency, bandwidth at half amplitude, temporal resolution and response phase of the retinal ganglion cells in adult rats. Compared with the sustained cells, the transient cells have a much greater alteration in temporal response properties.     

微流控芯片技术在生命科学研究中的应用

微流控芯片最初起源于分析化学领域,是一种采用精细加工技术,在数平方厘米的基片,制作出微通道网络结构及其它功能单元,以实现集微量样品制备、进样、反应、分离及检测于一体的快速、高效、低耗的微型分析实验装置.随着微电子及微机械制作技术的不断进步,近年来微流控芯片技术发展迅猛,并开始在化学、生命科学及医学器件等领域发挥重要作用.本文首先简单介绍了微流控芯片制作材料和工艺,然后主要阐述了其在蛋白质分离、免疫分析、DNA分析和测序、细胞培养及检测等方面的应用进展.     

Photovoltaic and spectral properties of tetraphenyloporphyrin and metallotetraphenyloporphyrin dyes

Spectroscopical properties and photocurrent (or photovoltage) of tetraphenyloporphyrins and metallotetraphenyloporphyrins in nematic liquid crystal have been studied. Photoelectric response has been measured in an electrochemical cell made of the semitransparent semiconducting and golden electrodes with porphyrin dyes embedded in liquid crystal. Fluorescence, time-resolved luminescence in microsecond time scale and photoacoustic spectra have also been measured. The competition between radiative, non-radiative processes and charge transfer is discussed. It has been shown that effectivity of porphyrins for photocurrent generation depends on the presence/absence of central metal in the macrocycle of porphyrin skeleton and the kind of metal. The schematic model of the contributions of the dye molecule and semiconducting electrode in the electron transfer process is shown.     

Molecular Basis of the Dynamic Strength of the Sialyl Lewis X—Selectin Interaction

The selectins are Ca²⁺‐dependent cell adhesion molecules that facilitate the initial attachment of leukocytes to the vascular endothelium by binding to a carbohydrate moiety as exemplified by the tetrasaccharide, sialyl Lewis X (sLeX). An important property of the selectin‐sLeX interaction is its ability to withstand the hydrodynamic force of the blood flow. Herein, we used single‐molecule dynamic force spectroscopy (DFS) to identify the molecular determinants within sLeX that give rise to the dynamic properties of the selectin/sLeX interaction. Our atomic force microscopy (AFM) measurements revealed that the unbinding of the selectin/sLeX complexes involves overcoming at least two activation barriers. The inner barrier, which determines the dynamic response of the complex at high forces, is governed by the interaction between the Fuc residue of sLeX and a Ca²⁺ ion chelated to the lectin domain of the selectin molecule, whereas the outer activation barrier can be attributed to interactions involving the sialic acid residue of sLeX. Due to their steep inner activation barriers, the selectin‐sLeX complexes are less sensitive to high pulling forces. Hence, besides its contribution to the bond energy, the Ca²⁺ ion also grants the selectin–sLeX complexes a tensile strength that is crucial for the selectin‐mediated rolling of leukocytes.     

在线标准加入火焰原子吸收光谱法测定钮扣电池中铅和镉

应用火焰原子吸收光谱(FAAS)法测定了钮扣电池中铅和镉的含量,对测定条件作了较详细的研究。用在线双毛细管标准加入法消除了基体的干扰。按所述方法测定电池样品中铅和镉,测定结果的RSD依次为3.58%和5.87%,铅和镉的浓度水平分别为5.4×10-3%和2.3×10-4%(质量分数),回收率结果为93.0%~100.1%(铅)和95.0%~101.0%(镉)。