Exploiting kinetic spectrophotometric determination of captopril, an angiotensin-converting enzyme inhibitor, in a multi-pumping flow system

The implementation of a differential kinetic spectrophotometric method for the determination of angiotensin-converting-enzyme inhibitors in pharmaceutical formulations is described. The determination method was based on the monitoring (350 nm) of the reaction between captopril and iodate, in the presence of iodide, versus time and was fully automated by exploiting the multi-pumping flow concept. The developed multi-pumping flow system included four discretely actuated solenoid micro-pumps as unique flow manifold active components. The automatic control of the solenoid micro-pumps, under time-based and pulse-counting routines, allowed the implementation of a reliable and versatile analytical determination, with the additional advantage of permitting a runtime access to important analytical parameters, such as flow rate, sample insertion and reagent addition synchronisation, facilitating this way the establishment of an approach for kinetic measurements, directly due to the efficient solution handling and accurate timing control.

A linear range of determination was verified for captopril concentrations between 10.0 and 60.0 μg mL⁻¹ with a sample throughput of about 100 determinations per hour. The results were in agreement with those obtained by the reference procedure with relative deviations between 1.81 and 4.48%.     

不同电荷态泛素蛋白离子的193 nm紫外光解离质谱

将193 nm激光与傅里叶变换离子回旋共振(FT-ICR)质谱仪结合, 研究了不同价态的泛素蛋白离子的紫外光解离质谱. 结果表明, 在光解离过程中向分析池内引入适量的碰撞气, 不仅能增加母体离子的裂解率, 也能提高碎片离子的捕获效率. 相对于碰撞辅助解离(CAD)中产生的b和y离子, 紫外光解离(UVPD)方法能够产生更为丰富的不同种类碎片离子. 其中, 对于+11价泛素离子, 蛋白质序列的覆盖率接近80%, 远高于对应的CAD实验结果. 与已往报道不同的是, 裂解覆盖率呈现出较强的电荷相关性. 因此, 如何进一步提高较低电荷态的蛋白离子的解离效率和序列覆盖率还需深入研究.     

Far UVC light for E. coli disinfection generated by carbon nanotube cold cathode and sapphire anode

Ultraviolet germicidal irradiation (UVGI) is an effective technique that can sterilize bacteria and viruses by UV light. Far UVC lamps of short wavelengths can prevent infectious diseases because they sterilize while minimizing cell damage in mammals. Here, E. coli inactivation by far UVC light with peak wavelength of 230 nm made of carbon nanotube (CNT) emitters and sapphire anode was studied. The κ-Al₂O₃ phase of sapphire with a direct band gap of 5.4 eV was excited with CNT-based cold cathode electron beam (C-beam) to generate far UVC light. It was confirmed that the inactivation of E. coli by far UVC light based on the C-beam was reduced by 5 log reduction within 60 s.     

Spectrophotometric determination of gatifloxacin in pure form and in pharmaceutical formulation

Simple, rapid, and extractive spectrophotometric methods were developed for the determination of gatifloxacin (GT) in bulk and pharmaceutical dosage form. These methods are based on the formation of yellow ion-pair complexes between the basic nitrogen of the drug and three sulphonphthalein acid dyes, namely; bromocresol green (BCG), bromocresol purple (BCP), bromophenol blue (BPB) and bromothymol blue (BTB) in phthalate buffer pH 3.0, 3.4 and 3.2, using BCG, BCP and (BPB or BTB), respectively. The formed complexes were extracted with chloroform and measured at 415, 417, 412 and 414 nm for BCG, BPB, BCP and BTB, respectively. The analytical parameters and their effects on the reported systems are investigated. The reactions were extremely rapid at room temperature and the absorbance values remains unchanged at 48 h for all reactions. Beer's law was obeyed in the ranges 2.0-20, 2.0-14 and 2.0-16 microg mL(-1) for BCG, BCP and (BPB or BTB), respectively. The composition of the ion pairs was found 1:1 by Job's method. Beer's law validation, accuracy, precision, limits of detection, limits of quantification. The proposed methods have been applied successfully for the analysis of the drug bulk form and its dosage form. The results were in good agreement with those obtained by the official and reported methods.     

Determination of trace amounts of thiocyanate by a new kinetic procedure based on an induction period

A new, simple and sensitive kinetic spectrophotometric method with no need for removing of interfering substances is proposed for the determination of thiocyanate ion in biological and water samples. The procedure is based on the inhibiting effect of thiocyanate on the sodium periodate-potassium bromide-meta cresol purple (MCP) system in acidic media. The induction period of the reaction is proportional to the SCN- concentration. The decolorization of meta cresol purple by the reaction products was used to monitor the reaction spectrophotometrically at 525 nm. Under optimum conditions, thiocyanate can be determined in the range of 0.02-0.8 microg ml(-1) with a 3sigma detection limit of 5 ng ml(-1). The relative standard deviations for 10 replicate determinations of 0.060, 0.10 and 0.50 microg ml(-1) thiocyanate are 3.7, 2.4 and 1.0%, respectively. This method has been successfully used to the determination of thiocyanate content in smokers and non-smokers saliva and spiked water sample.     

头孢西丁与甲基绿的显色反应及应用

在p H 6.35的Tris-HCl缓冲溶液中,头孢西丁与甲基绿反应生成具有2个明显正吸收峰的离子缔合物,最大和次大吸收波长分别位于664和560 nm,表观摩尔吸光系数分别为2.98×104和1.76×104L/(mol·cm),头孢西丁的质量浓度在0.85~11.12 mg/L范围内遵守比尔定律。方法用于人体血液及药物中头孢西丁含量的测定,加标回收率在99.1%~101.2%之间,相对标准偏差在1.6%~2.0%之间,测定值与标示量一致。     

In situ growth and phenyl functionalization of titania nanoparticles coating for solid-phase microextraction of ultraviolet filters in environmental water samples followed by high performance liquid chromatography–UV detection

Based on TiO₂-nanoparticles coating fabricated by a one-step anodization method on titanium wire substrate, a novel phenyl functionalized solid-phase microextraction (SPME) fiber coating was prepared by simple and rapid in situ chemical assembling technique between the fiber surface titanol groups and trichlorophenylsilane reaction. The as-fabricated fiber exhibited good extraction capability for some UV filters and was employed to determine the ultraviolet (UV) filters in combination with high performance liquid chromatography–UV detection (HPLC–UV). The main parameters affecting extraction performance were investigated and optimized. Under the optimized conditions, the developed method was applied to detect several UV filters at trace concentration levels with only 8 mL of sample volume. They were determined in the range from 0.005 to 25 μg L⁻¹ with detection limits (S/N = 3) from 0.1 to 50 ng L⁻¹. The relative standard deviations (RSDs) for single fiber repeatability varied from 4.6 to 6.5% (n = 5) and fiber-to-fiber reproducibility (n = 5) ranged from 5.5 to 9.1%. The linear ranges spanned two-four magnitudes with correlation coefficients above 0.9990. Five real water samples including four Yellow River water samples and one rain water sample were determined sensitively with good recoveries ranging from 86.2 to 105.5%. The functionalized fiber coating performed good reproducible manner, high mechanical strength, good stability and long service life. Moreover, this study proposed an efficient sample pretreatment method for the determination of UV filters from environmental water samples.     

Multiscale spectroscopy using a monolithic liquid core waveguide with laterally attached fiber ports

In conventional absorption spectrometers, the range of accessible concentrations of analytes in aqueous solution is significantly limited by the dynamic range of the measurement system. Here we introduce the concept of multiscale spectroscopy allowing extending that range by orders of magnitude within one single device. The concept relies on using multiple light-sample interaction lengths, boosting the accessible concentration range by a particular extension factor. We experimentally implement our concept by a liquid core waveguide having multiple fiber ports side-wise attached to the waveguide, thus probing the light propagating inside the core at predefined distances from the input. This configuration provides three orders of magnitude of interaction length in one device. To verify the concept we exemplarily determine the concentrations of nitrate and of Rhodamine 6G in water, showing one hundred times improved measurement capabilities. The multiscale spectrometer uses the entire sample volume and allows the simultaneous measurement of fluorescence and attenuance. Due to its integrated design and the extended measurements capabilities, we anticipate application of our device in many application-relevant areas such as water quality analysis or environmental science.     

Charge-Transfer Processes in Doped Alkali Halides

Defects formation under UV-irradiation in the impurity-induced absorption bands at 4.2 K has been studied for crystals with and without traps for electrons (CsI:Pb and Eu^2?-doped alkali halides, respectively). In both cases the results have been explained by an electron transfer from the impurity-perturbed halogen ion states, resulting in the appearance of electrons and holes in the crystal. In CsI:Pb, the electrons are trapped by lead ions and the holes are self-trapped. In Eu^2?-doped crystals, the electrons and the holes recombine with the formation of excitons, whose decay results in the creation of Frenkel defects.     

胡萝卜多糖含量的测定

采用热水浸提、乙醇分级沉淀和洗涤等步骤提取胡萝卜中的多糖,通过苯酚-硫酸比色法测定多糖的含量,选择490nm作为检测波长,在5-60μtg范围内葡萄糖质量浓度和吸光度呈良好的线性关系,相关系数r为0.9997,相对标准偏差RSD为1.86％,平均回收率为99.61％,胡萝卜中多糖含量为6.02％.本方法简便、快速、准确、重现性好,可作为胡萝卜多糖含量的测定方法,对于综合开发利用胡萝卜及提高胡萝卜品质的研究能提供一定参考依据.