环氧化天然橡胶二次改性的研究进展

环氧化天然橡胶(ENR)分子链中存在易开环的反应性环氧基团,环氧基团的开环反应为ENR进行进一步的改性提供了极大的方便。ENR选择性氢化双键可以提高其抗热氧稳定性;ENR与胺类化合物和含磷化合物的反应,可以将防老剂和阻燃剂负载到ENR分子链上,从而达到在分子尺寸的分散;可以利用环氧基团的选择性氧化裂解制备NR基嵌段共聚物的前驱体遥爪型NR;通过环氧基团可以进行接枝改性其它聚合物;此外,分子链中的环氧基团使ENR与无机填料和其它极性聚合物共混相容性提高。     

耗散粒子动力学和纳维边界条件在微米纳米流体力学模拟中的应用

耗散粒子动力学是一种粗粒化的计算模拟方法,在微米和纳米流体力学中有着广泛的应用.由于界面在微小体积流体中的重要性,边界条件的选取在微米和纳米流体的研究中起到了关键性的作用.我们简单地介绍了耗散粒子动力学的模拟方法,并以此为基础,介绍了能够实现纳维边界条件的可调滑移长度的边界条件模拟方法.通过条纹状图案修饰的超疏水表面的流体力学行为研究,和高分子链在微米纳米流体器件中的运动研究2个例子,耗散粒子动力学结合纳维边界条件的模拟方法的实用性和可靠性得到了证实.     

Curing Characteristics and Tear Properties of Bentonite Filled Ethylene Propylene Diene (EPDM) Rubber Composites

The effect of bentonite clay loading on curing characteristics and tear strength of bentonite filled ethylene propylene diene monomer (EPDM) composite were studied. Compounding was carried out on two-roll mill and vulcanization was done at 150⁰C. Torque values, scorch time and optimum cure time of the prepared rubber compound were assessed by using Mosanto Disc Rheometer (MDR 2000). Results indicated that the maximum torque of EPDM/Bt composite decreases at high bentonite loading. Increasing in values with increasing bentonite loading was recorded for minimum torque and optimum cure time of EPDM/Bt composite. The increase is related with the increase in viscosity due to the increasing of bentonite clay loading in EPDM matrix. Scorch time was found to be decreasing up to 30 phr bentonite clay. Results also show that tear strength of EPDM/Bt composite increased with increasing bentonite loading up to 90 phr. The reason is probably due to agglomeration occur causes the reduction in properties at high loading above 90 phr bentonite clay. The scanning electron microscopy (SEM) of tear fracture surface of EPDM/Bt composite illustrated that with increasing bentonite loading up to 90 phr bentonite clay, a better dispersion of bentonite clay is achieved as compared to lower loading, resulting in high tear strength value for EPDM/Bt composite.     

Existence of equilibrium for infinite system of interacting diffusions

We develop and implement new probabilistic strategy for proving basic results about long-time behavior for interacting diffusion processes on unbounded lattice. The concept of the solution used is rather weak as we construct the process as a solution to suitable infinite-dimensional martingale problem. However, the techniques allow us to consider cases where the generator of the particle is degenerate elliptic operator. As a model example, we present the situation where the operator arises from Heisenberg group. In the last section, we provide further examples that can be handled using our methods.     

290 AMeV 12C诱发乳胶核反应末态粒子多重数关联

对290 AMeV 12C诱发乳胶核反应末态粒子间的多重数关联进行了研究。实验结果表明:黑径迹粒子、灰径迹粒子、重电离粒子多重数之间存在较强的关联,而且黑径迹粒子和重电离粒子多重数有饱和的趋势,这些特征与高能区实验结果一致;簇射粒子与其他粒子间的关联性较弱,这一特征与高能区实验结果不同,主要归因于弹核能量较低、簇射粒子产额较小;黑径迹粒子、灰径迹粒子在前后半球的平均多重数随靶核的增大而增加;实验结果可用基于碰撞几何的旁观体-反应体模型及级联蒸发模型来解释。We have investigated the multiplicity correlation of particles produced in 12C-emulsion interactions at 290 AMeV. It is found that there is a strong correlation between black track particle, grey track particle and heavily ionized track particle, and finally black track particles and heavily ionized track particles tend to saturation, which is the same as the experimental results observed at high energies. The multiplicity correlation between shower particle and other particles is weaker, which is different from the experimental results observed at high energies. This discriminating character can be explained by the lower energy of projectile. The productivity of shower particle is lower at intermediate energies compared to that at high energies. The forward-backward averaged multiplicity of black track particle and grey track particle increases with the increasing target size.     

多控制者下的双向量子隐形传态

提出了一种多控制者的双向量子隐形传态方案。在该理论方案中有三个控制者协助通信,纠缠资源为最大七粒子纠缠态,其中通信者Alice和Bob以及三个控制者预先秘密共享最大七粒子纠缠态以构建量子信道。三个控制者的参与提高了通信的安全性,同时也避免了执行三粒子联合测量的复杂性。在通信过程中,首先Bob对自己密享的粒子执行酉操作,接着通信方各自对自己手中的粒子执行Bell基测量。假如控制者同意双方通信,便对自己手中的粒子执行单粒子测量并将测量结果通过经典信道传输给通信者。通信方分别结合控制者所公布的测量结果做相应的酉操作,这样便能完美地实现双向量子控制隐形传态。     

二维拉格朗日坐标系下气粒混合双向耦合对激波流场影响的计算

喷射颗粒与气体混合是内爆压缩领域的热点和难点. 针对喷射混合中的气粒双向耦合问题, 开展了理论建模、离散算法以及颗粒反馈对激波流场的影响研究. 建立了拉格朗日计算框架下的数学模型; 给出了耦合源项的离散算法; 开展了平面及汇聚构型条件下, 气粒双向耦合的数值模拟研究; 发现了颗粒反馈导致气体激波提速现象以及气区流场物理量分布形态的改变, 初步获得了量化分析结果. 本文建立的数学模型、计算方法和获得的新的物理认识, 为深入理解喷射混合现象、解决相关工程应用问题提供了重要理论支撑.     

用于前向光散射颗粒粒度测量的基函数Tikhonov正则化算法

以前向光散射颗粒测试技术中的反演问题为研究对象,将颗粒粒径分布函数表示为一系列B-spline函数的线性组合以降低反演问题的病态性。模拟计算与实验表明:采用基函数形式的Tikhonov正则化方法可减少传统Tikhonov正则化反演带来的振荡,使其更加光顺。     

Industrial SBR Process: Computer Simulation Study for Online Estimation of Steady‐State Variables Using Neural Networks

This work investigates the industrial production of styrene‐butadiene rubber in a continuous reactor train, and proposes a soft sensor for online monitoring of several processes and polymer quality variables in each reactor. The soft sensor includes two independent artificial neural networks (ANN). The first ANN estimates monomer conversion, solid content, polymer production, average particle diameter, and average copolymer composition; the second ANN estimates average molecular weights and average branching degrees. The required ANN inputs are: (i) the reagent feed rates into the first reactor and (ii) the reaction heat rate in each reactor. The proposed ANN‐based soft sensor proved robust to several measurement errors, and is suitable for online estimation and closed‐loop control strategies.