蒙特卡罗计算中颗粒型燃料的随机分布模型比较

高温气冷堆是新一代反应堆系统的热门候选堆型，已经受到国际上越来越多的关注。为设计和分析这种堆型，因其特有的包覆颗粒燃料引入了双重非均匀性，需要应用随机分布模型。对粗网格模型、细网格随机(FLS)模型、随机顺序添加(RSA)模型、子网格随机(Sub-FLS)模型和Metropolis模型等进行了研究，通过计算分析比较给出了各种模型的优缺点。结果表明:子网格随机模型和连续的RSA模型非常接近参考值，但是连续RSA模型的建模时间随着燃料体积份额的增加连续快速上升。 Key words: coated particle fuels; stochastic transport model; Monte Carlo; random distribution     

Dynamic modeling of the morphology of latex particles with in situ formation of graft copolymer

Modification of the polymer–polymer interfacial tension is a way to tailor‐make particle morphology of waterborne polymer–polymer hybrids. This allows achieving a broader spectrum of application properties and maximizing the synergy of the positive properties of both polymers, avoiding their drawbacks. In situ formation of graft copolymer during polymerization is an efficient way to modify the polymer–polymer interfacial tension. Currently, no dynamic model is available for polymer–polymer hybrids in which a graft copolymer is generated during polymerization. In this article, a novel model based on stochastic dynamics is developed for predicting the dynamics of the development of particle morphology for composite waterborne systems in which a graft copolymer is produced in situ during the process. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Shear modulus determination in model hydrogels by means of elongated magnetic nanoprobes

The mechanical characterization of complex soft matter by quasi-static magnetometry using nanoscopic magnetic probes is demonstrated for model hydrogels doped with two types of elongated magnetic nanoparticles. Chemically crosslinked poly(acrylamide) (PAAm) hydrogels serve as the matrix in which nickel nanorods or weakly magnetized hematite (α-Fe₂O₃) ellipsoids are embedded as local probes. We investigated the swelling behavior of the ferrogels in order to verify that their equilibrium swelling degree in water is not influenced by the probes, shows a good correlation with the Frenkel–Flory–Rehner model. The proposed magnetomechanical method relies on a correlation between the shear modulus of the PAAm hydrogel matrix and the coercive fields of the corresponding isotropic ferrogels. By extending the Stoner–Wohlfarth model for single-domain blocked magnetic particles by a term for particle rotation in an elastic matrix, information on the shear modulus of the matrix can be obtained. Comparison of the results with the expected relation from rubber elasticity theory illustrates both the general potential as well as the limits of the approach. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

硅橡胶包覆十八烷/聚(St-MMA)储能微胶囊复合材料制备及热性能

以十八烷/聚(苯乙烯-甲基丙烯酸甲酯)(P(St-MMA))微胶囊为相变材料,硅橡胶作为载体,制备了十八烷/P(St-MMA)/硅橡胶复合材料。研究了微胶囊的加入方式及加入量,硅橡胶包覆方法。通过红外光谱(IR)和扫描电镜(SEM)研究复合材料的结构和形貌。通过力学性能测试如拉伸强度、扯断伸长率,确定最佳的加工方法。通过热重分析法(TG)、差示扫描量热法(DSC)和储热性能对复合材料的热性能进行研究。结果表明,十八烷制成微胶囊加入到硅橡胶中,且微胶囊加入量是2份时,十八烷/P(St-MMA)微胶囊/硅橡胶的热稳定性热稳定性及力学性能较好。室温硅橡胶包覆微胶囊掺混固化法制备的复合材料的力学性能优于直接共混后热固化法和混炼涂抹后热固化法。十八烷/P(MMA-St)/硅橡胶复合材料的焓值为67.6J/g,储能效果好。     

Influence of staff number and internal constellation on surgical site infection in an operating room

Prediction of bacteria-carrying particle (BCP) dispersion and particle distribution released from staff members in an operating room (OR) is very important for creating and sustaining a safe indoor environment. Postoperative wound infections cause significant morbidity and mortality, and contribute to increased hospitalization time. Increasing the number of personnel within the OR disrupts the ventilation airflow pattern and causes enhanced contamination risk in the area of an open wound. Whether the amount of staff within the OR influences the BCP distribution in the surgical zone has rarely been investigated. This study was conducted to explore the influence of the number of personnel in the OR on the airflow field and the BCP distribution. This was performed by applying a numerical calculation to map the airflow field and Lagrangian particle tracking (LPT) for the BCP phase. The results are reported both for active sampling and passive monitoring approaches. Not surprisingly, a growing trend in the BCP concentration (cfu/m³) was observed as the amount of staff in the OR increased. Passive sampling shows unpredictable results due to the sedimentation rate, especially for small particles (5–10 μm). Risk factors for surgical site infections (SSIs) must be well understood to develop more effective prevention programs.     

SPH方法研究空气在平板入水中的影响

飞机水上迫降以及船体在高速行驶时,均会发生结构物砰击水面的现象,当结构物底面较为平坦,砰击水面时会捕获空气,在板底形成空气垫。研究空气垫的形成及影响,有助于对结构物进行更准确的载荷分析。该问题的研究涉及到气固液三相的相互作用,在数值模拟中仍是一个挑战,本文使用光滑粒子流体动力学(SPH)方法对该问题进行模拟。首先,与实验结果进行对比;其次,系统地研究了平板形成空气垫以及砰击水面的过程,考查了空气、水和平板的动能变化。对比了在SPH模拟中考虑空气与不考虑空气得到的水压力场和平板所受压力,说明了空气对结果的影响;最后,研究了平板宽度对空气垫形成的影响,从而进一步影响加速度。     

Synthesis and application of cinnamate-functionalized rubber for the preparation of UV-curable films

A butyl rubber derivative that can be cured upon exposure to UV light in the absence of additional chemical additives was developed. This polymer was prepared by the reaction of hydroxyl-functionalized butyl rubber with cinnamoyl chloride to provide a cinnamate functionalized rubber. The cinnamate content was varied by starting with derivatives prepared from butyl rubber containing either 2 or 7 mol% isoprene. The kinetics of the cross-linking was studied by UV–visible spectroscopy and it was found to vary according to the film thickness. The changes in gel content and volume swelling ratio with irradiation time were dependent on the cinnamate content. Toxicity studies suggested that the cross-linked materials do not leach toxic molecules. The approach was also applied to obtain cross-linked films of butyl rubber-poly(ethylene oxide) graft copolymers, leading to surfaces that resisted the adhesion and growth of cells. Thus the approach is versatile and is of particular interest when non-leaching coatings of cross-linked butyl rubber are desired for biomedical or other applications.     

Surface treatment of CaCO3 with a mixture of amino- and mercapto-functional silane coupling agents and tensile properties of the rubber composites

In order to reinforce the composite consisting of isoprene rubber (IR) and calcium carbonate (CaCO₃) particles, the surface treatment of CaCO₃ particles with a mixture of amino- and mercapto-functional silane coupling agents was investigated. The quantity of chemisorbed silanes in treated CaCO₃ measured using thermogravimetry was greater for amino- than for mercapto-silane and for the tri- than for the dialkoxy structure. Second, the molecular mobility of polycondensate of the mixtures with the trialkoxy structure measured using ¹H pulse nuclear magnetic resonance had the least molecular mobility, i.e., formed the highest density network. The greater values of stress at 500% strain, fracture stress, and elongation at break were determined for the treatment with amino- and mercapto-functional silanes having a trialkoxy structure from the stress-strain curves of composite. The mixture treatment with dialkoxy structure and with amino- or mercapto-functional silane only did not improve the mechanical properties sufficiently. Interactions between the amino group and the CaCO₃ surface, covalent bonding between the mercapto group and the IR, and high density network formation of trialkoxy silane were important for improving the mechanical properties of the composite.     

A moving particle semi‐implicit method for free surface flow: Improvement in inter‐particle force stabilization and consistency restoring

The moving particle semi‐implicit (MPS) method has been widely applied in free surface flows. However, the implementation of MPS remains limited because of compressive instability occurred when the particles are under compressive stress states. This study proposed an inter‐particle force stabilization and consistency restoring MPS (IFS‐CR‐MPS) method to overcome this numerical instability. For inter‐particle force stabilization, a hyperbolic‐shaped quintic kernel function is developed with a non‐negative and smooth second order derivative to satisfy the stability criterion under compressive stress state. Then, a contrastive study is conducted on the contradiction between the common understanding of the conventional MPS hyperbolic‐shaped kernel function and its performance. The result shows that the conventional MPS hyperbolic‐shaped kernel function can easily cause violent repulsive inter‐particle force and then lead to the compressive instability. Therefore, the first order derivative of the modified hyperbolic‐shaped quintic kernel function is recommended as the form of the contribution of the neighbor particles to achieve a more stable inter‐particle repulsive force. For consistency restoring, the Taylor series expansion and the hyperbolic‐shaped quintic kernel are combined to improve the accuracy of the viscosity and pressure calculation. The IFS‐CR‐MPS algorithm is subsequently verified by the inviscid hydrostatic pressure, jet impacting, and viscous droplet impacting problems. These results can be used for choosing kernel function and the contribution of neighbor particles in particle methods. Copyright © 2016 John Wiley & Sons, Ltd.