氮杂冠醚研究Ⅶ、双仲胺型氮杂冠醚对过渡金属离子的选择性萃取作用

合成了五种新型双仲胺型氦杂冠醚，研究了它们对过渡金属离子进行液—液萃取，并用原子吸收法测定其浓度。实验结果表明：这类冠醚对Ａｇ￣＋、Ｐｄ￣（２＋）、和Ｐｔ￣（４＋）等贵金属离子有较强的选择配位性能，对选择性分离这些金属离子有重要的意义。     

Reagentless system for sulphite determination based on polyaniline

A new reagentless system for sulphite (or sulphur dioxide) determination is reported based on the use of an organic conducting polymer, polyaniline, and its absorbance variation at 550 nm, depending on the sulphite concentration. After chemical polymerisation of aniline a very thin film of polyaniline is obtained. Although the response is not fully reversible, each film can be used for at least 10 measurements for low analyte concentrations (up to 0.5 mg l⁻¹) and five measurements for higher sulphite concentrations. Moreover, the reproducibility, ease of preparation and low cost of the films, permit the use of a new disposable system for each measurement. When the change in absorbance at 550 nm was measured for 210 s (stabilisation time), the system showed a linear response, which ranged from 0.025 to 1.50 mg l⁻¹ of sulphite. A theory with regard to the reaction mechanism between the polyaniline films and sulphite is also proposed. The system was applied to sulphite determination in wine samples and the results were in agreement with those obtained by the Official Method of Analysis (iodometric titration).     

一种测定蛋白质的分子吸收光谱分析新体系

使用四溴荧光素(TBFS)作为蛋白质的染色剂,建立了一种测定蛋白质的分子吸收光谱分析新体系———BSA 四溴荧光素,体系十分简单,BSA浓度在0.11～60.0μg·ml-1范围符合比耳定律;测定15.0μg·ml-1BSA溶液10次,求得相对标准偏差为1.26%,桑德尔灵敏度为0 094μg·cm-2。可直接用于血清样品中蛋白质的测定,测得质量控制血清样品中蛋白质质量为35.4±2.4mg,与标准值36.9mg吻合。回收率在97.0%～108.3%之间,结果满意。     

Determination of heavy metal concentration in feed and permeate streams of polymer enhanced ultrafiltration process

Polymer enhanced ultrafiltration (PEUF) is a newly developed method for the removal of heavy metals from aqueous solutions. This method was applied for the removal of mercury and cadmium with the presence of polyethyleneimine (PEI) as a water soluble polymer. After ultrafiltration experiments for metal–polymer mixtures, two separate streams, namely, retentate and permeate, former of which contains mainly metal–polymer complex and free polymer molecules while latter of which mainly contains free metal ions, were obtained. At the end of PEUF experiments, performance of operation was determined by concentration analyses which was achieved by atomic absorption spectroscopy (AAS) applied in a different way for permeate and retentate streams considering the effect of presence of polymer. For mercury analysis, cold vapor AAS was applied. It was observed that the presence of PEI did not affect the atomic absorption signal when 10% HCl was added to the sample solutions. For calcium and cadmium, flame AAS was used. It was observed that change in PEI concentration results in change in measured concentration of calcium and cadmium. Therefore, two new approaches were developed for accurate measurement of concentrations of calcium and cadmium. It was also observed that presence of other metals did not affect the accuracy of the measurement of a particular metal in the concentration range studied.     

Neutron scattering study of pentanol solubilization in sodium octanoate micelles

We extend a previous small-angle neutron scattering study of sodium octanoate (NaC₈) micelles to the ternary system sodium octanoate/pentanol/water. The use of contrast variation through selective deuteration of individual components together with explicit computation of interference effects, permits us to deduce the location of pentanol (C₅OH) in the micelles. Our main conclusion is that, although the micelles grow as (C₅OH) is solubilised, there is no concomitant variation in the NaC₈ aggregation number. At low alcohol concentrations, the C₅OH is located near the NaC₈ polar heads, while at higher concentration the -OH groups are distributed throughout the micellar core.     

Vacuum Ultraviolet Photolysis of Polyethylene,Polypropylene, and Polystyrene

Using infrared reflection absorption spectroscopy (IRRAS), quartz crystal microbalance (QMB) measurements, and X-ray photoelectron spectroscopy (XPS) in combination with chemical derivatization techniques the VUV photolysis of polyethylene (PE), polypropylene (PP), and polystyrene (PS) was investigated. A mass balance obtained from the quantification of the data was used to suggest reaction path ways. Although PE and PP behave similar, the mass loss is about 8 times higher in the case of PP. These differences originate from the higher disproportionation to recombination ratio for the branched polymer. Both polymers form double bonds and at extended treatment times they tend to crosslink. PS is rather stable due to the possibility of the energy dissipation by fluorescence.     

Extension of conjugation leading to bathochromic or hypsochromic effects in OPV series

Four OPV series 1-4 (a-d) with a terminal dialkylamino group as electron donor were prepared by Wittig-Horner reactions. To study the influence of the push-pull effect on the long-wavelength absorption, three of the four series contained terminal acceptor groups (CN, CHO, NO(2)). The length of the chromophores strongly affects the intramolecular charge transfer (ICT)-an effect which superimposes upon the extension of the conjugation. Increasing numbers n of repeat units cause an overall bathochromic shift for the purely donor-substituted series 1 a-4 a and the series 1 b-4 b with CN as weak acceptor. The two effects annihilate each other in the series 1 c-4 c with terminal CHO groups, so that the absorption maxima are almost independent of the length of the chromophore. A hypsochromic shift is observed for the series 1 d-4 d, which contains the strong acceptor group NO(2). This anomaly disappears on protonation of the dialkylamino group because the push-pull effect disappears in the ammonium salts. The results can be explained by semiempirical quantum mechanics (AM1, INDO/S). The HOMO-LUMO transition, which is mainly responsible for the ICT, becomes less important in the electron transitions S(0)-->S(1) when the distance between donor and acceptor is increased. The commonly used VB model, which contains an electroneutral and a zwitterionic resonance structure, is contrasted with a MO model with dipole segments at both ends of the OPV chains. The latter model turned out to be more appropriate-at least for donor-acceptor-substituted OPVs with n >/= 2.     

Cadmium colloids from non-aqueous solvents

Cadmium colloids have been prepared by Chemical Liquid Deposition (CLD). The metal is evaporated to yield atoms which are solvated at liquid nitrogen temperature, and upon warming, stable liquid colloids are formed with particle size ranging between 25–100 Å. Zeta potentials were calculated according to the conversion of Hunter and the Hückel equation, for ethanol and dimethyl sulphoxide. UV/VIS measurement of most of the black colloids showed absorption band around 280 nm. For comparison, we prepared CdS colloid with size 400–625 Å. The colloids are stable to oxidation in air and/or oxygen bubbling. The synthesis of colloids and films from Cd with acetone, 2-butanone, ethanol, 2-propanol, 2-methoxyethanol, DMF and DMSO is reported. Transmission Electron Microscopy (TEM) allows us to determine particle size.     

Synthesis, X-ray structure and properties of a new nitrite-bound copper(II) complex with 2-(3,5- dimethylpyrazol-1-ylmethyl)pyridine in a CuN4(O) coordination

Synthesis and characterization of a nitrite-bound copper(II) compound [CuL⁴)₂(ONO)]ClO₄ have been achieved (L⁴ = 2-(3,5-dimethylpyrazol-1-ylmethyl)pyridine]. The bidentate ligand L⁴ provides a pyridine and a pyrazole donor site; however, they are separated by a methylene spacer. The complex has been structurally characterized and it belongs to only a handful of complexes having nitrito-bound mononuclear copper(II) centre. The metal atom has a distorted square pyramidal geometry with the copper atom displaced from the equatorial plane by 0.25 Å. In MeCN solution the green complex exhibits a broad ligand-field transition at 655 nm with a shoulder at 675 nm and in dichloromethane-toluene glass (80 K) it exhibits an EPR spectral feature characteristic of the unpaired electron in the d_x²−y² orbital. Variable-temperature (80–300 K) magnetic susceptibility measurements in the solid state as well as room temperature measurement in MeCN solution reveal mononuclear magnetically dilute copper(II) centre. When examined by cyclic voltammetry (MeCN solution) it displays electrochemically irreversible Cu^II---Cu^I response [cathodic peak potential, E_pc (V vs saturated calomel electrode (SCE)): −0.32]. An oxidative response is observed at 1.14 V, probably due to bound-nitrite oxidation and is partially removed to generate a solvated complex at the electrode surface. The latter species gives rise to reversible Cu^II---Cu^I redox response [ ].     

Azocalixarenes: Synthesis, Characterization, Complexation, Extraction, Absorption Properties and Thermal Behaviours

Azocalixarenes, which have a conjugated chromophore azo (–N=N–) group in p-positions, are synthesized in “one-pot” procedures in satisfactory yields. Their structures in the solid and solution are elucidated by UV–vis, FT-IR, ¹H and ¹³C NMR spectroscopic methods as well as elemental analysis techniques. Some of them are complexed with metal ions (alkali, alkaline-earth and transition metal ions) under neutral conditions. A wide variety of applications is expected by the functionalization of the side arms. The selective liquid–liquid extraction of various alkali, alkaline-earth and transition metal cations from the aqueous phase to the organic phase is carried out by using azocalixarenes. Furthermore, the synthesized azocalixarenes are utilized for selective extraction of Fe³⁺ cations from the aqueous phase to the organic phase. The effects of varying pH and solvent upon the absorption ability of azocalixarenes substituted with electron-donating and electron-withdrawing groups at their o-, m-, p-positions are examined. The thermal behaviours of azocalixarenes containing upper rim functionalized groups are investigated by means of thermogravimetry (TG), differential thermal analysis (DTA) and differential thermogravimetry (DTG).