Fluorinated networks through photopolymerisation processes: synthesis, characterisation and properties

The study concerns the UV curing of systems containing fluorinated products. New difunctional and monofunctional monomers and oligomers bearing either radical or cationic photopolymerisable functionalities were synthesised. They were UV cured and the properties of the films obtained were investigated. In some cases biphasic structures were obtained, showing the separation between the fluorinated and hydrogenated domains at nanometric level. By copolymerising a low amount of the fluorinated additive with hydrogenated resins, the bulk properties of the films were not changed, but a deep modification of the surface was obtained. In all cases a selective enrichment of the fluorinated monomer at the film surface was observed. The dependence of the surface properties on the monomer structure, on its concentration and on the type of substrate was studied.     

A composite microporous gel polymer electrolyte prepared by ultra-violet cross-linking

A new type of composite microporous gel polymer electrolyte was prepared by directly coating the hydrolyzed prepolymers onto PVdF microporous membrane, and then polymerizing and cross-linking with ultra-violet (UV). Their chemical, thermal, surface microscopic configuration, swelling ability and electrochemical properties have been investigated for various prepolymer’s solution concentrations. The swelling ability and ionic conductivity of the membrane supporting hybrid gel electrolyte (MSHGE) could reach an extreme point at 0.15 g/ml of the prepolymer’s solution. It is thought that their performance can be affected by the surface microscopic configuration and the quality of coated copolymer. The Arrhenius-type relationship was observed in the temperature dependence of ionic conductivity. The ionic conductivity of MSHGE (PVdF-15) at room temperature can reach 6.18 × 10⁻³ S cm⁻¹, and its electrochemical stability window is about 4.9 V.     

Photoinduced Formation of an Azobenzene‐Based CD‐Active Supramolecular Cyclic Dimer

A series of new photo‐responsive amino acid‐derived azobenzenedicarboxylic acid derivatives (S)‐ 1 a – e were synthesized. Compound (S)‐ 1 a in the trans form exhibited no circular dichroism (CD) signal in DMF under ambient conditions, whereas intense Cotton effects were observed upon UV irradiation, indicating the formation of a chiral supramolecular structure in the cis form. The CD signals disappeared when trifluoroacetic acid (TFA) was added to the solution. The ester counterpart [(S)‐ 1 a′ ] showed no CD signal. Hydrogen bonding between the carboxy groups seemed necessary for constructing the supramolecular structure. The kinetic studies of cis to trans isomerization of (S)‐ 1 a demonstrated that the formation of a chiral supramolecule enhances the stability of the cis‐azobenzene structure. The ESI mass spectrum of stilbenedicarboxylic acid (S)‐ 4 , an analogue of (S)‐ 1 b , confirmed the formation of a dimer. A theoretical CD study revealed that (S)‐ 1 a in the cis form should be present as a cyclic chiral dimer.     

Charge transfer interactions in polyesters with a donor‐(σ‐bridge)‐acceptor moiety in the repeating unit

Two high molecular weight linear polyesters were investigated to gain insight in how the photophysics of electron donor‐(σ‐spacer)‐electron acceptor (DσA) compounds are affected by incorporation into a polymer. They were prepared by condensation of either adipoyl or sebacoyl chloride with a diol that was functionalized with an N,N‐dialkylaniline donor, a cyclohexyl type σ‐spacer, and a 1,1‐dicyanovinyl acceptor. The solubility, which is very low, and the thermal properties of the polyesters are dictated by physical crosslinking as a consequence of interchain donor‐acceptor interactions. Charge transfer (CT) absorption and emission are observed, which involve CT between DσA moieties of different chains rather than CT processes within a single DσA unit. As a result, the photophysics of the DσA units in the polyesters differs strongly from that of similar DσA compounds in solution. Upon swelling the polymers with THF, the CT fluorescence disappears partly. Analogous polymers containing only an N,N‐dialkylaniline donor display dual fluorescence; one band reflects local emission, while the other is attributed to excimer emission. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4775–4784, 2004     

Direct syntheses,characterization and optical analysis of PbX2 (X = I,Br and Cl) nanoparticles without any additives

Lead iodide, bromide and chloride nanoparticles (NP-PbX₂, X = I, Br and Cl) with various morphologies were successfully prepared through a simple hydrothermal method without any additives or stabilizers. By treating the PbX₂ in EtOH/CH₂Cl₂ solution at 170 °C for 12 h, the corresponding PbX₂ nanoparticles were synthesized. The average sizes of PbX₂ nanoparticles were between 30 and 80 nm. The structure, morphology, surface and size of PbX₂ nanoparticles were determined by X-ray diffraction powder, Scanning Electron Microscopy, solid state Photo Luminescent, BET surface area and solid state UV.     

Photodimerization of Coumarin Functionalized Poly(alkyl Acrylate) and Poly(alkyl Methacrylate) Random Copolymers: Influence of Copolymer Composition on Photocrosslinking

Coumarin‐containing poly(alkyl (meth)acrylates) were prepared via 70–80% esterification of hydroxy‐containing acrylic copolymers, then solution cast into thin films and photocrosslinked via the dimerization of coumarin derivatives with UVA light. The coumarin‐modified polymers crosslinked upon exposure and exhibited gel fractions between 74 and 99%. Coumarin dimerization efficiency increased with higher polymer mobility at the irradiation temperature. The effects of light intensity and irradiation time in photo‐dimerized systems followed the Bunsen‐Roscoe reciprocity law indicating that coumarin photodimerization depended only on dose. Thus, low intensities are overcome with longer times. This is an important advantage over photoinitiated free radical crosslinking which depends on irradiation intensity to the ½ power.     

Effect of the polarisation direction and incident angle of a UV light on the electrooptical response of the polymer-stabilised vertically aligned in-plane switching liquid crystal

We investigated the effect of the polarisation direction and incident angle of a UV light on the electrooptical properties of the polymer-stabilised vertically aligned in-plane switching (PS-VAIPS) liquid crystal. The PS-VAIPS sample cured with a UV light whose polarisation was parallel to the projected direction of the in-plane electric field showed greater transmittance, faster rising time and slower falling time than the sample cured with a UV light with a perpendicular polarisation to the electric field. In addition, the PS-VAIPS sample showed slower rising time and faster falling time with increasing incident angle of the UV light.     

聚乙烯醇中的紫外偏振线性聚炔分子

本文通过研究共轭线性碳链分子，聚炔H(C≡C)_nH (n=5∽7)的电子吸收带，设计了适用于UV的光偏振膜. 激光烧蚀的聚炔分子被分散在聚乙烯醇膜中. 结构各向异性的性质使得多炔分子的UV吸收跃迁偶极子与分子轴平行，并且吸收仅发生在沿着分子轴具有电子矢量幅度的电磁波上. 多炔分子在固体聚乙烯醇膜中作为特定波长入射光的偏振分量之一的选择性吸收剂. 使用可旋转的偏振UV光研究包含聚炔分子的拉伸聚乙烯醇膜的吸收强度的角度依赖性，并根据线性二向色性理论中有序参数进行分析.     

Correlating Pressure-Induced Emission Modulation with Linker Rotation in a Photoluminescent MOF

Conformational changes of linker units in metal-organic frameworks (MOFs) are often responsible for gate-opening phenomena in selective gas adsorption and stimuli-responsive optical and electrical sensing behaviour. Herein, we show that pressure-induced bathochromic shifts in both fluorescence emission and UV/Vis absorption spectra of a two-fold interpenetrated Hf MOF, linked by 1,4-phenylene-bis(4-ethynylbenzoate) ligands ( Hf-peb ), are induced by rotation of the central phenyl ring of the linker, from a coplanar arrangement to a twisted, previously unseen conformer. Single-crystal X-ray diffraction, alongside in situ fluorescence and UV/Vis absorption spectroscopies, measured up to 2.1 GPa in a diamond anvil cell on single crystals, are in excellent agreement, correlating linker rotation with modulation of emission. Topologically isolating the 1,4-phenylene-bis(4-ethynylbenzoate) units within a MOF facilitates concurrent structural and spectroscopic studies in the absence of intermolecular perturbation, allowing characterisation of the luminescence properties of a high-energy, twisted conformation of the previously well-studied chromophore. We expect the unique environment provided by network solids, and the capability of combining crystallographic and spectroscopic analysis, will greatly enhance understanding of luminescent molecules and lead to the development of novel sensors and adsorbents.