Electric field‐induced birefringence,optical rotatory power and conoscopic measurements of a chiral antiferroelectric smectic liquid crystal

Using a photoelastic modulator‐based novel set‐up, the electric field‐induced in‐plane birefringence and the optical rotatory power (ORP) were measured of an antiferroelectric liquid crystalline compound (12OF1M7) in its various phases using 30 µm homeotropic cells. Some specific signatures of the in‐plane birefringence and of the ORP for the various phases are being established. A relatively small threshold field is needed for the unwinding process of the antiferroelectric phase with a unit cell of four layers [SmC_A*(1/2)] compared with that for two layers [SmC_A*(0)]. On application of the electric field on the high temperature side of the SmC_A*(1/2) phase (80.1–81.5°C), a field‐induced phase transition is shown to occur directly to the SmC* phase, whereas on the lower temperature side (79.4–80.1°C) the transition takes place to SmC* via the SmC_A*(1/3) phase. The in‐plane birefringence exhibits a critical power law dependence for the SmC*–SmA transition. The ORP changes sign within the temperature range of the phase with a unit cell of three layers, reflecting a change in the handedness during this phase. Using tilted conoscopy, the results for the biaxiality and the apparent tilt angle for a smectic liquid crystal with a tilt angle greater than 18° in the ferroelectric phase are reported. The biaxiality implies the difference in the refractive indices between the two minor axes of the refractive index ellipsoid. The optical transmittance at visible and IR wavelengths for free‐standing films reveal characteristic reflection bands for these phases. The modulated structures of the reflected bands appear just above the SmC_A* phase and below SmC_A*(1/3); these are possibly due to an easy deformation of the phase by the surfaces.     

Sol–gel derived ZnO nanoparticulate films for ultraviolet photodetector (UV) applications

Zinc oxide nanoparticles based UV detector was fabricated on thermally oxidized silicon substrate. ZnO nanoparticle films were deposited using sol–gel route. The seed solution was prepared using two different solvents (methanol and isopropyl alcohol (IPA)). The surface morphology of the prepared films was characterized by FESEM. Structural characterization along with optical measurements was carried out using XRD and UV–vis spectroscopy. For the UV photo-detector, ZnO thin film prepared in IPA is selected based on their structural and optical analysis. The changes in photo-response of ZnO thin film with respect to time was studied under the dark and variable UV intensities. It was observed that the photocurrent increased with a factor of 4.82 under 1.16 mW of UV intensity. It is believe that the synthesized ZnO thin films have potential to use in the ultraviolet photo-detector applications.     

Thermal properties stability of UV irradiated PVA nanohybrid composites

Zn‐Al‐salicylic nanohybrid layers have been prepared and used as fillers for polyvinyl alcohol (PVA). Nanohybrid layers of a broad absorption area in UV region were completely and uniformly dispersed in a continuous polymer matrix. PVA and PVA nanohybrid composite (NHC) films were exposed to UV irradiation. Thermal properties (diffusivity, effusivity, and conductivity) of both have been measured through photoacoustic technique before and after UV irradiation. Thermal parameters of PVA suffered from a quick deterioration with UV exposure due to reduction of the phonon mean free path as a result of molecular chain scissions. However, significant stability in such parameters of NHC has been obtained under the influence of UV irradiation. This thermal properties stability may be an important step on the way of obtaining photostable polymer NHC. Copyright © 2012 John Wiley & Sons, Ltd.     

The C2π and the X2σ States of BaF

An extensive calculation was carried out using the precisely measured value of the Q-band heads and the following molecular constants for the C²π¹ ₂ and the X²σ states, which are responsible for the Green Band System of BaF, were determined.     

Uric acid quantification in fingernail of gout patients and healthy volunteers using HPLC‐UV

The presence of elevated uric acid (UA) levels is a sign of gout, that is, hyperuricemia. In this study the monitoring of the UA levels in less‐invasive biological samples, such as the human fingernail, is suggested for the diagnosis and therapy of gout. Twenty‐six healthy volunteers (HV) and 22 gout patients (GP) were studied. The UA was extracted from human fingernail samples, then separated on an Inertsil ODS‐3 column (250 × 4.6 mm i.d., 4.0 μm, GL Sciences) by isocratic elution using methanol–74 mm phosphate buffer (pH 2.2) 2:98 (v/v). A UV detector was used to monitor the samples at 284 nm. Using the developed method, different UA concentrations were found in the GP and HV. When comparing the concentrations from GP with those from HV, a statistically significant correlation was observed between the UA (p < 0.01). In this study, the UA was confirmed as a potential biomarker for the diagnosis and therapy of gout. We have developed a novel sensitive, and simple method for the determination of UA in the fingernails of GP and HV. The human fingernail may serve as a noninvasive biosample for the diagnosis of gout. Copyright © 2016 John Wiley & Sons, Ltd.     

Ultrafast study of inter‐ and intrachain energy transfer in a core–polymer

Interchain interactions can play a positive role in reaching amplified spontaneous emission in an interesting core–polymer system where the donor (side chains) and the acceptor (core) are chemically linked together. Different degree of interchain interactions modifies the photophysical characteristics of the polymer. By means of transient absorption spectroscopy we show that the stimulated emission from the core decreases passing from solid state to concentrated solution and it is almost absent in the diluted solution. The conformational rearrangements of the core–polymer chain in solution limits the efficiency of the intrachain Förster energy transfer mechanism. The free chain rotations decrease the exciton hopping along the conjugated chains, the ratio between donor and acceptor moieties in the polymer, and change the relative orientation of the transition dipoles of the donor and acceptor causing a strong decrease of energy transfer efficiency and subsequently of the gain. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 965–969     

Optoeletronic properties of poly(N‐alkenyl‐carbazole)s driven by polymer stereoregularity

Stereoregular polymers like isotactic poly(N‐butenyl‐carbazole) (i‐PBK), isotactic and syndiotactic poly(N‐pentenyl‐carbazole) (i‐PPK and s‐PPK), and poly(N‐hexenyl‐carbazole) (i‐PHK and s‐PHK) are synthesized using the stereospecific homogeneous “single site” Ziegler‐Natta (Z‐N) catalysts: rac‐dimethylsilylbis(1‐indenyl)zirconium dichloride ( 1 )/methylaluminoxane (MAO) and diphenylmethylidene(cyclopentadienyl)‐(9‐fluorenyl)zirconium dichloride ( 2 )/MAO. Catalytic activity is rationalized by density functional theory (DFT) calculations. All synthesized polymers are fully characterized by NMR, thermal, wide‐angle X‐ray diffraction, and fourier transform infrared spectroscopy analysis. Fluorescence measurements on isotactic and syndiotactic polymer films indicate that all polymers give rise to excimers, both “sandwich‐like” and “partially overlapping.” Excimer formation is essentially driven by the polymer tacticity. Isotactic polymers generate both sandwich‐like and partially overlapping excimers, while syndiotactic polymers give rise especially to partially overlapping ones. A theoretical combined molecular dynamics–time dependent DFT approach is also used to support the experimental results. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 242–251     

Study of Temperature and UV Wavelength Range Effects on Degradation of Photo-Irradiated Polyethylene Films Using DMA

Plastic bags mostly made of polyethylene (PE) cause pollution as solid waste due to their non-degradability nature. Initiation of a degradative process by enhanced photo-oxidation is a possible method for an accelerated degradation. This paper presents temperature treatment effects on PE films where photodegradation was initiated using ultraviolet (UV) irradiation in the ranges of 200–300 nm and 300–400 nm for 2 hr. Effects of temperature of 40°C and 55°C on non-UV-irradiated and UV-irradiated PE films processed by conventional methods were investigated and evaluated after 50 hr, 150 hr, and 350 hr of temperature exposure. The effects of UV wavelength range irradiation on the degradation were deduced. Measuring the dynamic moduli using a dynamic mechanical analyzer monitored the degradation. The decrease in average storage modulus was 62% with treatment at 55°C, higher than the 16% drop at 40°C for unirradiated samples after 350-hr exposure. Cross-linking in UV-exposed samples, characterized by an increase in dynamic modulus (stiffening), was observed followed by a reduction of storage modulus. Temperature treatment at 55°C together with 300–400-nm UV range irradiation resulted in the largest increase, i.e., 22% after 150 hr, followed by the largest reduction of storage modulus, i.e., 74.6% for a cumulative 350-hr exposure.