监测Lévy稳定过程均值变点的平均运行时间估计

平均运行长度(时间)(ARL)是判断一控制图监测变点效果好坏的一个重要工具.本文主要研究Lévy稳定过程的均值变点监测问题.我们给出了三个控制图,即EWMA,GEWMA和GLR的ARL估计,并通过数值模拟比较了4个控制图监测均值变点的效果和差异.     

Infrared detection of a planet next to a bright star

Humans have always dreamt about the possibility of existence of planets in solar systems other than our own. After flying by, dropping probes, and even landing devices on most planets within our own solar system, the search for extra-solar planet is included in every proposal to either build a larger and better earth-, space-, or moon-based telescope, or observatory facility. The preliminary analysis seems to indicate that wavelength band from 25 μm to 30 μm is most promising in solving this problem. A number of IR technological challenges are to be overcome before the actual detection system can even be considered in a detailed design. The significant technical challenges of finding a planet will be described. Then details are given on the feasibility of detecting a planet with an instrument concept designed specifically for this purpose, a space-based, rotating rotationally shearing interferometer.     

Synthesis and characterization of poly(ethylene oxide‐co‐ethylene carbonate) macromonomers and their use in the preparation of crosslinked polymer electrolytes

Methacrylate‐functionalized poly(ethylene oxide‐co‐ethylene carbonate) macromonomers were prepared in two steps by the anionic ring‐opening polymerization of ethylene carbonate at 180 °C, with potassium methoxide as the initiator, followed by the reaction of the terminal hydroxyl groups of the polymers with methacryloyl chloride. The molecular weight of the polymer went through a maximum after approximately 45 min of polymerization, and the content of ethylene carbonate units in the polymer decreased with the reaction time. A polymer having a number‐average molecular weight of 2650 g mol^?1 and an ethylene carbonate content of 28 mol % was selected and used to prepare a macromonomer, which was subsequently polymerized by UV irradiation in the presence of different concentrations of lithium bis(trifluoromethanesulfonyl)imide salt. The resulting self‐supportive crosslinked polymer electrolyte membranes reached ionic conductivities of 6.3 × 10^?6 S cm^?1 at 20 °C. The coordination of the lithium ions by both the ether and carbonate oxygens in the polymer structure was indicated by Fourier transform infrared spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2195–2205, 2006     

Thermochemically induced binding of methyl orange to polycations containing primary amine groups

The thermochemical transformation of electrostatically formed complexes of methyl orange (MO) with polycations containing primary amine groups such as ammonium salts afforded new polymers with a high concentration of covalently bound 4‐N,N‐dimethylaminoazobenzene groups in the side chain. Poly(allylamine hydrochloride) and poly(β‐aminoethylene acrylamide hydrochloride) were employed as support polycations for MO. The transformation of sulfonate–ammonium ion pairs into sulfonamide bonds, via heating at an elevated temperature, was supported by the polymer properties before and after the thermal treatment. The polymer structure changes were monitored with elemental analysis, Fourier transform infrared, ¹H NMR, and ultraviolet–visible absorption spectroscopy, and thermogravimetric analysis. The spacer length between the backbone and azobenzene structures used as side chains strongly influenced the polymer properties before and after the heat‐induced reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5898–5908, 2006     

A coincidence transmission electron microscope with digital waveform measuring system for analytical microscopy

We have been developing a new analytical transmission electron microscope (TEM), called a coincidence TEM, which in principle enables elemental mapping images to be observed at a high signal‐to‐noise (S/N) ratio under very low dose radiation conditions. In this paper, we report the development of a coincidence TEM with a digital waveform measuring system for obtaining a coincidence elemental mapping image. In this system, analog signals detected by a Si(Li) detector and a multianode, position‐sensitive photomultiplier (PSPM) are continuously converted into 12‐bit digital waveform data at a rate of 100 MHz, and transferred to a PC. From the transferred digital waveform data, information on X‐ray photon energy, electron incident position, and detection times of both X rays and electrons are calculated by digital waveform measurement, which lead to the observation of a successful coincidence elemental mapping image. Copyright © 2005 John Wiley & Sons, Ltd.     

红外光谱法研究含CeSt3的LDPE膜紫外光氧降解

报道了硬脂酸铈（ＣｅＳｔ_３）、及其在各种浓度、或不同温度、或延长贮放时间下含ＣｅＳｔ_３的低密度聚乙烯（ＬＤＰＥ）膜紫外光氧化降解过程的红外光谱。结果表明，只要在ＬＤＰＥ膜中加入０．１ｗｔ＋％～０．３ｗｔ＋％ＣｅＳｔ_３光敏剂，即可控光降解ＬＤＰＥ膜的寿命。     

透射式跑道能见度激光测量仪的研究

介绍了一种利用激光测量跑道水平及斜视能见度的智能化仪器。该仪器主要由光学系统、信号放大与处理系统及显示系统三部分组成。简要介绍了该仪器的基本结构、工作原理和主要技术指标，讨论了其中的技术难点及其相应的解决办法。     

Novel All Digital Scheme for Open Loop Fiber Optic Gyroscopes

ＮｏｖｅｌＡｌＤｉｇｉｔａｌＳｃｈｅｍｅｆｏｒＯｐｅｎＬｏｏｐＦｉｂｅｒＯｐｔｉｃＧｙｒｏｓｃｏｐｅｓＹＡＮＧＹｕａｎｈｏｎｇ（Ｔｈｅ５ｔｈＲｅｓｅａｒｃｈＤｉｖｉｓｉｏｎｏｆＢｅｉｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｓ＆Ａｓｔｒｏｎａｕ...     

低密度聚乙烯光引发交联机理——Ⅱ.BNB自旋捕捉ESR研究

在光引发剂二苯甲酮(BP)存在下,紫外光辐照低密度聚乙烯(LDPE)所形成的自由基中间体已被自旋捕捉剂2,4,6-三特丁基亚硝基苯(BNB)所捕捉,其自旋加合物自由基已为电子自旋共振(ESR)所特征。现已检测和鉴定到二种自旋加合物:一种是叔碳自由基;另一种是仲碳自由基。它们分别是由BP的激发三重态从LDPE链的支化点和亚甲基团上夺氢所形成的自由基中间体同自旋捕捉剂BNB反应生成的。上述的证据表明:LDPE的光引发交联点主要发生在叔碳和仲碳原子上,且H-型交联点占主导地位。