制备条件对CdWO4纳米棒的光致发光性能的影响

以Na₂WO₄和CdCl₂为主要原料，在130 ℃水热制备了CdWO₄纳米棒，并用扫描电镜(SEM)、透射电镜(TEM)、粉末X射线衍射(XRD)和能谱元素分析(EDS)对产物进行了表征。结果表明，产物为长约100 nm，直径10～30 nm的CdWO₄纳米棒。研究了不同反应条件下制备的CdWO₄纳米棒的光致发光性能。     

稀土离子(Gd3+,Eu3+)加载于纳米介孔ZrO2中的发光

水热合成法制备的高度有序多孔ZrO2具有规则六角排列，均匀纳米孔洞（约1．8nm)，丰富的表面，界面态及比表面积和强的蓝－（近）紫外光发射，使其较常规体材料有更优异的性质，以稀土离子为探针，研究了Gd^3 ,Eu^3 在这些纳米微孔中的发光行为，结果表明，500摄氏度下，介孔ZrO2与稀土离子相作用并有效地将能量传递给稀土离子，增进稀土离子发光，而在ZrO2:Gd-Eu体系中，Gd^3 在ZrO2与Eu3 间起桥梁作用，使基质ZrO2→Eu^3 的能量传递更为有效。     

液相合成方形PbS纳米晶的光学特性

采用一种简单、温和的液相合成方法制备了PbS纳米晶，利用透射电镜和高分辨透射电镜对PbS纳米晶的形貌与晶型结构进行了表征．研究了PbS纳米晶的光学吸收和光致发光特性，并比较分析了包覆剂聚乙烯吡咯烷酮(PVP)和回流时间对产物光学特性的影响．结果表明：PVP分子链中的O原子与纳米晶表面吸附的游离态Pb原子形成Pb-O配位键，使产物的激子吸收大为减弱，同时引起了表面浅束缚态能量的升高，最终导致了荧光淬灭现象．     

LaAl3(BO3)4的合成及其晶体结构的研究

在研究LnAl3(BO3)(Ln=稀土元素，Y）的合成及发光特性过程中，发现镧铝硼酸盐LaAl3(BO3)4具有一种新的晶体结构。本文用助熔剂法合成了LnAl3(BO3)4(Ln=Gd,La)单晶样品，LaAl3(BO3)4为薄板状，而GdAl3(BO3)4为六方的棒状，用TREOR90程序对LaAl3(BO3)4粉末样品的X射线衍射数据进行了指标化，结果为：LaAl3(BO3)4属正交晶系，晶胞参数为a=0.93586(4)nm,b=0.79904(3)nm,c=0.40626(6)nm,V=0.34595nm^3，在1000℃空气环境下，用硝酸盐热分解法合成了单相LnAl3(BO3)4:E3 （Ln=Gd,La)荧光粉并研究了其发光特性，结果表明：LnAl3(BO3)4:Eu^3 (Ln=Gd,La)是非常有前途的等离子显示器用荧光粉。     

New Photoluminescence Phenomena of Ge／SiO2 Glass Synthesized by Sol-gel Method

New Ge/SiO2 glasses have been synthesized by heating the GeO2/SiO2 dry gels under H2 gas at 700℃. The resulting fluorescence spectra show that this kind of Ge/SiO2 glasses emit strong photoluminescence at 392 nm (3.12 eV), medium strong photoluminescence at 600 nm (2.05 eV) and weak photoluminescence at 770 nm (1.60 eV) respectively. Possible photoluminescence mechanisms are also discussed based on the results of X-ray diffraction (XRD) and X-ray photoelectron spectra (XPS).     

BaLaB_9O_（16）中Ce~（3＋）敏化Dy~（3＋）发光的机理

在紫外光激发下，研究了ＢａＬａＢ９Ｏ（１６）中Ｄｙ（３＋）、Ｃｅ（３＋）的发光光谱、激发光谱、发光强度及荧光寿命随着组成变化的规律性．结果表明：Ｄｅ（３＋）对Ｄｙ（３＋）的发光有相当强的敏化作用，Ｃｅ（３＋）→Ｄｙ（３＋）的能量传递效率可高达９３％，能量传递的机理为电偶极－偶极相互作用的共振传递．根据３４９ｎｍ激发下Ｄｙ（３＋）发光强度与浓度的关系，证明了Ｄｙ（３＋）发光的自身浓度猝灭机理也为电偶极－偶极相互作用．     

Synthesis,optical, and electrochemical properties of novel copolymers on the basis of benzothiadiazole and electron‐rich arene units

Novel alternating conjugated copolymers ( P1–P6 ) consisting of an electron‐deficient benzothiadiazole and a variety of electron‐rich thiophene‐arene‐thiophene units were synthesized by palladium‐catalyzed polycondensations (Stille and Suzuki reactions), aiming at processable materials with a reduced optical band gap. The structures of P1–P6 were confirmed by ¹H NMR and ¹³C NMR, and their molecular weights were determined by size exclusion chromatography. In the Suzuki polycondensation, the role of the catalyst [Pd(PPh₃)₄ and Pd(OAc)₂] on the resulting molecular weight was investigated. Pd(OAc)₂ enhances the molecular weight of the polymers for both thiophene and phenylene bis‐boronic esters as compared with Pd(PPh₃)₄. The optical properties of the polymers were examined in solution and the solid state. The polymers with n‐octyl substituents ( P1 , P4 , P5 , and P6 ) on the thiophene rings possessed less‐planar structures as a result of torsional steric hindrance, and their absorption spectra appeared blueshifted as compared with their unsubstituted analogues ( P2 and P3 ). The electrochemical properties of the polymers were studied using cyclic voltammetry. Although the alkyl substitution affects the oxidation potential, only marginal differences in the reduction potentials were observed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2360–2372, 2002     

Li3AlB2O6： Synthesis, Crystal Structure, and Its Luminescence Property Compared with LiSrBO3

The synthesis and crystal structure of Li3AlB2O6 with different cell parameters are reported and these cells are transformed each other from the confirmation of crystallographic structural analyses. The absorption spectrum, luminescence and lifetimes of the Li3AlB2O6 and LiSrBO3 solid compounds are measured and the comparisons are made between them. It is shown that the absorption edges are at about 400 nm (or band gap 3.1 eV) and there is one of absorption peaks at about 350 nm for the Li3AlB2O6 and LiSrBO3. The emission band (530 nm) makes a red shift and fluorescence decay time (24.39 ns) of the Li3AlB2O6 becomes smaller compared with the emission band (480 nm) and lifetime (93.16 ns) of the LiSrBO3 at the visible region. The transition energies and oscillator strengths of the clusters (Li3AlB2O6)2 and (LiSrBO3)2 lying at low excited states are calculated by the time-dependent Hartree-Fock method. The obtained results are used to model the photophysical properties and discuss the origin of spectral bands of the Li3AlB2O6 and LiSrBO3.     

[{Zn(3-SBA)(2，2′-bipy)(H2O)2}·H2O]n的合成和晶体结构研究

A novel coordination ploymer [{Zn(3-SBA)(2,2′-bipy)(H₂O)₂}·H₂O]_n was synthesized by the hydrothermal reaction of 3-Na₂SBA, ZnSO₄·7H₂O and 2,2′-bipy. The structure was characterized by elemental analysis, IR and single crystal X-ray diffraction. The title coordination ploymer crystallized in monoclinic with space group P2₁, a=0.803 42(18) nm, b=1.501 8(3) nm, c=0.821 13(19) nm, β=109.350(4)°. The coordination polymer has an infinite chain structure and its luminescent property has also been studied. CCDC: 282746.     

硅基多孔氧化铝模板非水电沉积CdS纳米线的研究

纳米材料,包括尺寸为纳米量级的超细微粒?线?薄膜?量子阱和超晶格等引起了人们广泛的重视 [1,2] ?其中 , 半导体纳米微粒和由其构成的纳米固体结构开辟了材料科学研究的新领域?硫化镉 (CdS) 作为一种重要的Ⅱ - Ⅵ族无机半导体材料 , 具有独特的光电性质 , 在光电化学电池和多相光催化反应中都有广泛应用?近年来 , 已有大量关于合成 CdS 纳米结构的文献报导 [3～12] , 所采用的方法如反胶束法?单分子膜法?自组装法以及电化学沉积法等 , 其中非水电解与模板技术相结合的制备方法引起了人们高度的重视并且被广泛的采用?自从 Baranski 等在上…