三维内肋管内插入螺旋扭带的强化传热实验

本文分别以水和乙二醇为工质，在Ｒｅ数范围为：６００～４００００，Ｐｒ数范围为：５．５～１１０之间，对四根分别插入三种不同扭率螺旋扭带的三维内助管内的换热和流阻特性进行了实验研究。结果表明：三维内肋管内加装扭带的强化传热技术适用于低Ｒｅ数下高Ｐｒ数工质的管内对流换热强化。根据实验值得到了流阻和换热关联式。     

Photooxidation of aqueous trichloroethylene using a buoyant photocatalyst with reaction progress monitored via micro-headspace GC/MS

Although photooxidation has previously been shown to be successful in removing organic contaminants from water, methods combining the rapid photooxidation of the desired contaminant with easy catalyst manipulation and removal are few and far between. In the absence of an easy means of catalyst removal, the photooxidation process becomes more costly and time consuming, and photocatalysis cannot be employed as an in situ method for the remediation of aqueous organic contaminants. In this study, the photocatalyst was added to an aqueous trichloroethylene (TCE) solution in the form of TiO₂-coated buoyant microspheres. The solution, placed in a flow-cell photoreactor along with the buoyant catalyst, was irradiated with a UV-filtered Xenon light source. Limited sample sizes necessitated the development of a low-cost headspace GC/MS analysis method, utilizing a standard direct-injection autosampler. This analytical technique aptly monitored reaction progress and indicated that aqueous TCE concentration decreases by nearly 90% in the first hour of irradiation. Subsequent solvent extraction GC/MS analysis indicated that the TCE is initially sorbed by the photocatalyst spheres, but as irradiation continued, TCE is removed from the catalyst spheres surfaces. During the course of irradiation, the expected TCE mineralization product hydrochloric acid appeared, as indicated by a decrease in pH and ion chromatography analysis. The microsphere-born catalyst was easily removed from the treated solution by filtration. Thus, it is possible that a method for effective, low-cost in situ photooxidation of aqueous organic contaminants will be realized in the near future.     

Separation and determination of m-phenoxybenzaldehyde reaction products by capillary gas chromatography

A capillary GC method employing an internal standard has been developed and successfully used for quantitative determination both of the raw materials used for the manufacture of m-phenoxybenzaldehyde and for the components of the reaction mixtures obtained at various stages of the development of the process. A complete analysis can be performed in a single temperature programmed run.     

n维氢原子的散射态

研究了n维氢原子的散射态性质．给出了精确的按“k/2π标度”归一化的散射态的精确解波函数及相移表达式，讨论了相移的解析性质，获得了束缚-连续跃迁矩阵元的解析计算公式．普通氢原子(n=3)散射态的有关结果作为特例包含在本文的一般结论之中． 关键词： n维氢原子 散射态 精确解 相移 束缚-连续跃迁矩阵元     

大耦合孔同轴输出腔的3维解析分析

 在高功率微波器件中，通常采用大耦合孔的同轴微波输出腔，该腔为3维结构。采用场等效原理将腔体、耦合孔及其输出负载(行波边界)进行分区,每个区域中的场由界面上的磁流密度决定。采用格林函数积分法可得每个区域中的3维场,再由各个区域的场匹配方程求得腔体的谐振频率、特性阻抗、有载品质因数、模式分布等参数。为腔体的计算和设计提供一种计算模型。     

狄拉克方程的单旋量解法以及由此引起的认识上的差异

把狄拉克方程分解成了两个单旋量的联立方程组．指出现行的自旋理论仅考虑了其中的一个方程，是以一个单旋量代替双旋量来描述状态而建立起来的．笔者在认同现行自旋理论可以作为狄拉克方程的一种求解方法，因而同意其中的某些提法外，对于其主要的物理观念：微观粒子存在着独立于现实的位形空间之外的一个自旋空间，在这个自旋空间内禀着角动量S和磁矩μ；这个自旋理论是相对论性量子力学导出的必然结论等等看法予以否定．笔者认为，只有同时考虑两个单旋量的方程，同时计及两个单旋量，才能准确地描述状态，从而正确地描述客观规律．     

Two-function upward-downward minimax theorems

Two-function upward-downward minimax theorems are derived which contain Simons upward-downward minimax theorem as well as Domokos minimax theorem as special cases. Here the convexity assumptions on two functions are given by mixing up their values as means proposed by Lin and Quan.     

等径管道的三维重建

由轮廓线重建物体的现有方法，不能准确地恢复原有管道的形状．本文提出了一种等径管道的三维重建方法，能较为准确地恢复原管道的三维结构．     

多级轴流压气机全工况特性计算

本文使用三维粘性流动计算软件Fine／Numeca,对某十五级轴流压气机进行了内流流场和全工况特性的数值计算尝试。分析了该压气机在设计工况和非设计工况的性能,同时把整机计算结果和前七级叶片的计算结果进行了比较。计算结果表明,当计算的级数较少时,目前的软件和硬件平台可以比较合理地预测压气机的全工况特性;而当计算的级数较多时,准确的数值模拟仍需要更为准确的多级模型和数值方法。     

乌骨鸡磷脂侧链脂肪酸的GC-MS分析

用氯仿:甲醇(2:1)超声提取乌骨鸡总磷脂,丙酮脱油精制后,经皂化、甲酯化处理,应用GC-MS联用技术对其侧链脂肪酸组成进行分析,并以面积归一法,计算各脂肪酸的相对百分含量.结果显示,乌骨鸡总磷脂中含有硬脂酸27.46%、花生四烯酸21.39%、油酸18.22%、亚油酸16.67%、棕榈酸12.13%、二十二碳六烯酸(DHA) 2.26%、二十碳三烯酸1.71%、棕榈油酸0.16%.不饱和脂肪酸和多不饱和脂肪酸的含量分别为60.41%和42.03%.乌骨鸡磷脂侧链脂肪酸中高比例的多不饱和脂肪酸和花生四烯酸含量是乌骨鸡磷脂的显著特征.