粘土担载的钼基催化剂的制备、结构及CO加氢合成醇性能

采用溶胶凝胶法与等体积浸渍相结合制备了一系列以粘土为载体的K-Co-Mo催化剂. 采用XRD、N₂等温吸脱附、H_{26+的还原,但对Mo⁴⁺和Co²⁺的还原没有明显的影响. 催化剂经还原后,在其表面生成了一种更低价态的Mo^δ+(1<δ<4)物种,被认为是合成醇的活性中心. 与非负载催化剂相比,粘土担载的K-Co-Mo具有更高的合成醇性能. 负载型催化剂具有较高的活性物种分散度,并且其介孔结构在一定程度上延长了合成醇反应中间体的滞留时间,从而促进了低碳醇的生成. 经773 K还原的催化剂具有较高的活性,其原因可为催化剂表面具有较高含量的Mo^δ+物种.}     

吸附于纳米磷化镓粉体表面碱性品红的拉曼光谱(英文)

本文中,对吸附于纳米磷化镓(GaP)粉体表面的碱性品红拉曼光谱进行了研究。通过将吸附碱性品红与纯碱性品红晶体样品的拉曼光谱进行对比、分析可知,碱性品红在纳米GaP粉体表面发生了化学吸附。在吸附碱性品红样品的拉曼光谱中,位于1200~1320cm-1范围内的光谱特征表明可能有新的化学键(P-O-C+或Ga-O-C+)形成。碱性品红分子的中央碳正离子(C+)与GaP表面具有孤对电子的氧原子形成配位键。红外光谱结果表明,氧原子与纳米GaP粉体表面的磷原子或镓原子键合,以P-O,Ga-O或P-O-Ga形式存在于GaP表面。碱性品红分子的呼吸振动,N-苯环伸缩振动,以及苯环C-C伸缩振动散射强度与纯碱性品红晶体样品相比皆有所增强。N-苯环伸缩振动散射强度增加意味着N原子是除C+离子以外的另一个可以与GaP表面发生化学作用的活性中心,这种化学作用是由N原子与GaP表面存在共轭效应造成的。     

催化剂薄层内甲烷水蒸气重整反应强化管内对流换热的数值模拟

本文以竖直圆管内壁催化剂薄层内发生甲烷水蒸气重整反应强化对流换热作为研究对象,对其进行了数值模拟．结果发现,催化剂薄层内的吸热化学反应可以有效地强化对流换热,降低流体和壁面温度,从而对壁面起到保护作用;极限热流密度的大小与流体的入口温度有关,存在最佳入口温度使极限热流密度最大．     

STM/AFM studies of the evolution of morphology of electroplated Ni/W alloys

The surface morphology evolution of Ni/W alloys was studied, as a function of the alloy composition. Using the modified plating baths developed in our laboratory recently, electroplated Ni/W alloys with different W content, in the range of 7–67 atom percent (a/o), can be obtained. This was found to lead to different structures, ranging from polycrystalline fcc-Ni type structure to amorphous, followed by orthorhombic with increasing W content in the alloy. Powder XRD was studied to determine the crystal structures. Ex situ STM, AFM and SEM were used to study in detail the surface morphologies of the different alloys, and their evolution with increasing W content.

The important findings are that a mixture of two crystalline forms can give rise to an amorphous structure. Hillocks that are usually a characteristic of epitaxial growth can also exist in the amorphous alloys. Oriented scratches caused by stress can also be formed.

Up to 20 a/o of W is deposited in the alloys in crystalline form, with the fcc-Ni type structure. Between 20 and about 40 a/o an amorphous structure is observed, and above that an orthorhombic crystal structure is seen, which is characteristic of the NiW binary alloy. Careful choice of the composition of the plating bath allowed us to deposit an alloy containing 67 a/o W, which corresponds to the composition NiW₂.     

CO激光器的发展及潜在应用

本文描述CO激发器的发展及潜在应用。叙述工业用预冷气流激光器,气动激光器和外科用水冷管式激光器。概述三种类型的预电离TEA CO激光器及电子束控制CO激光器。最后介绍CO激光器选用的贵金属催化剂。     

Core-level spectroscopy of the Pd/W(1 1 0) interface: Evidence of long-range Pd-island-W interactions at submonolayer Pd coverages

We have measured W 4f_7/2 core-level photoemission spectra from W(1 1 0) in the presence of Pd overlayers for coverages up to ∼1 pseudomorphic monolayer (ML). At coverages close to 0.05 ML a striking change in the W core-level spectrum is observed, which we interpret as indicating a long-range lateral effect of 2D Pd islands upon the W electronic structure in both the first and second W layers. As the coverage increases the long-range effect weakens and finally vanishes near 0.85 ML. Above this coverage the W spectra are typical for a W-based bimetallic interface, with the first-layer W atoms exhibiting a small interfacial core-level shift (−95 ± 5 meV) compared to the bulk atoms.     

Advanced Materials Processing by Adsorption Control

Precise control and knowledge of surface structures are essential inorder to meet the requirements of today's and future materials. One possiblegrowth technique capable of meeting the requirements is atomic layer epitaxy(ALE). ALE is based on sequentially applied saturated gas-solid reactions,which provide the means for adsorption controlled material deposition atatomic layer level. In this paper the potentiality of the use of porousmaterials in a detailed study of adsorption controlled growth is discussed.At the same time the study promotes the application of adsorption controlledmaterials processing for advanced catalysts manufacturing.     

Electrochemical formation of porous superlattices on n-type (1 0 0) InP

The present work deals with the electrochemical formation of superlattice structures on n-type (1 0 0) InP in HCl solutions. The superlattices consist of a stack of two layers with alternating high and low porosity on n-type material obtained by changing the anodizing current or the potential periodically in HCl solutions. The superlattice structures were characterized by scanning electron microscopy. The pore morphology and structure depend strongly on the electrochemical conditions. For anodization with low currents (e.g., 1 or 10 mA) or at low potentials (e.g., 1.5 V_Ag/AgCl), a porous layer with a facet-like structure was formed. For higher currents or potentials, such as 50 or 100 mA or 3 V_Ag/AgCl, respectively, a tree-like structure with random and/or tangled branches was observed. Finally, samples anodized at 5 V_Ag/AgCl, show a porous layer with a regular array of straight pores. The morphology and structure of the stacks of the porous layers can be controlled in the nanometer range, depending on the electrochemical conditions.     

Novel structural phases of Dy thin films on W(1 1 2)

Thin films of the rare-earth metal Dy were grown on W(1 1 2) at room temperature and 570 K. Then the resultant film morphologies were characterised by LEED and STM. A series of novel film morphologies, including c(4 × 6), c(5 × 12) and (5 × 8) structures, were found that are unique among the rare-earth metals. High thermal stability was found for the Dy films (up to 1650 K, close to the melting point at 1685 K) such that the Dy atoms preserved an ordered structure and the Dy volatility was less than would be expected from its vapour pressure. This is an indication of strong electronic interactions between the Dy atoms and the W(1 1 2) substrate.     

Mechanism of heterogeneous mercury oxidation by HCl on V2O5(001) surface

The selective catalytic reduction (SCR) system for NO_X removal in coal-fired power plants has a promoting effect on the oxidation and removal of elemental mercury. In this study, basic mechanism of mercury oxidation by V₂O₅-based SCR catalyst is investigated via density functional theory method and the periodic slab models. Calculations are conducted to determine the adsorption energies and geometries of Hg⁰, HgCl, HgCl₂ and HCl on V₂O₅(001) surface, and to reveal the energy profile of oxidation reaction and the structures of relative transition states and intermediates. The results indicate that HCl can significantly promote Hg⁰ oxidation on V₂O₅(001) surface, by forming an intermediate HgCl-surface which is important for Hg⁰ oxidation. The Hg⁰ oxidation goes through Hg⁰ → HgCl → HgCl₂, and the two stages of the reaction follow Eley–Rideal mechanism and Langmuir-Hinshelwood mechanism, respectively. The formation of HgCl₂ is the rate-determining step due to its high energy barrier. Three detailed reaction pathways are obtained, and the related energy profiles and structures are analyzed in detail. The Hg⁰ oxidation reaction can take place through all three pathways even if differences exist in each other, while pathways I and II have relatively low energy barriers.