Funktionalisierte Alkinkomplexe von Wolfram(VI). Synthese und Kristallstrukturen von [WCl4(Et?Se?CC?Se?Et)(THF)] und [WCl4(Et?Te?CC?Te?Et)(THF)]

Functionalized Alkyne Complexes of Tungsten(VI). Syntheses and Crystal Structures of [WCl₄(Et? Se? C?C? Se? Et)(THF)] and [WCl₄(Et? Te? C?C? Te? Et)(THF)] The title compounds have been prepared by reactions of [WCl₄(SEt₂)₂] with the alkynes Et? X? C?C? X? Et (X = Se, Te) in CCl₄ solution and subsequent addition of tetrahydrofurane. Both complexes were characterized by crystal structure determinations. [WCl₄(Et? Se? C?C? Se? Et)(THF)]: Space group P2₁/n, Z = 4, structure determination with 2942 unique reflections, R = 0.038. Lattice dimensions at 20°C: a = 934.2, b = 1639.5, c = 1189.5 pm, β = 96.497°. [WCl₄(Et? Te? C?C? Te? Et)(THF)]: Space group P2₁/n, Z = 4, structure determination with 4097 unique reflections, R = 0.067, Lattice dimensions at ?70°C: a = 899.2, b = 1691.9, c = 1213.3 pm, β = 96.82°. The complexes have monomeric molecular structures with the oxygen atom of the THF molecules in trans-position to the side-on bound alkyne ligands.     

Gas diffusion-flow injection determination of total inorganic carbon in water using tungsten oxide electrode

A novel gas diffusion-flow injection method has been developed for the rapid and sensitive determination of total inorganic carbon (TIC) in water. The method is based on the diffusion of CO₂ across gas permeable membrane from a donor stream containing 0.1 M HCl to an acceptor stream of sodium acetate (10⁻⁵ mol l⁻¹ and pH 10). The CO₂ trapped in the acceptor stream passes through an electrochemical flow cell contains a tungsten oxide wire and a silver/silver chloride electrode, where it was sensitively detected. The parameters affecting the sensitivity of the electrode such as buffer concentration, pH, flow rate and injected volume were studied in detail. The electrode response was linear in the concentration range from 5 to 100 μg ml⁻¹ CO₃²⁻ with a correlation coefficient (R²) of 0.998. Precision (R.S.D.) was 1.42% for 20 μg ml⁻¹ standard solution of CO₃²⁻ (n=10). The detection limit was 0.20 μg ml⁻¹ CO₃²⁻. The method was evaluated by the injection of real natural water samples and an average recovery of 100.1% was obtained. The sampling rate was 30 samples h⁻¹. The method is simple, feasible with satisfactory accuracy and precision and thus could be used for monitoring TIC in water.     

New heterodimetallic cyclopentadienyl carbonyl complexes: crystal structure of (C5Me4Et)(μ-CO)3Ru(C5Me5)

A series of heterodimetallic complexes of general formula (C₅R₅)M(μ-CO)₃RuC₅Me₅ (M = Cr, Mo, W; R = Me, Et) has been prepared in good yields by the reaction of [C₅R₅M(CO)₃]⁻ with [C₅Me₅Ru(CH₃CN)₃]⁺. (C₅Me₄Et)W(μ-CO)₃Ru(C₅Me₅) was characterized by a crystal structure determination. The W---Ru bond length of 2.41 Å is consistent with the formulation of a metal-metal triple bond, while the unsymmetrical bonding mode of the three bridging carbonyl groups reflects the inherent non-equivalence of the two different C₅R₅M-units. Using [CpRu(CH₃CN)₃]⁺ or [CpRu(CO)₂(CH₃CN)]⁺ as the cationic precursor leads to the formation of dimetallic species (C₅R₅)M(CO)₅RuC₅H₅ with both bridging and terminal carbonyl groups.     

Über die Präparation und die Eigenschaften von Molybdän-Wolfram-Carbonitriden

Molybdenum-tungsten-carbonitrides can be prepared by reacting prealloyed powders of Mo and W with carbon in the presence of nitrogen or ammonia. Single phase carbonitrides (Mo, W) (C, N) with the WC-type structure can be obtained. The nitrogen content of these carbonitrides increases with increasing molybdenum content. Flowing ammonia has a decarburizing effect, which has to be counterbalanced by an addition of a carbonaceous gas such as methane. Nitrogen instead of ammonia is equally effective and gives carbonitrides which have a nitrogen content only insignificantly lower than the carbonitrides obtained in flowing ammonia. The lattice parameters of the carbonitrides are found to be slightly smaller than the lattice parameters of the corresponding carbides.

     

Synthese und Kristallstruktur von [(n‐Bu)4N][W6Cl18]

Synthesis and Crystal Structure of [(n‐Bu)₄N][W₆Cl₁₈] Single‐crystals of [(n‐Bu)₄N][W₆Cl₁₈] were obtained as thin needles by adding methanol to a solution of W₆Cl₁₈ and [(n‐Bu)₄N]Cl in tetrahydrofuran. The structure was determined by single‐crystal X‐ray diffraction at 210 K. [(n‐Bu)₄N][W₆Cl₁₈] crystallizes in the monoclinic space group C 2/c with Z = 8 and the lattice parameters a = 2175.6(1) pm, b = 1738.0(1) pm, c = 2160.36(9) pm, and β = 91.680(5) °. The crystal structure contains isolated [(W₆Cl₁₂ⁱ)Cl₆^a]^— clusters and [(n‐Bu)₄N]⁺ ions.     

A stable carbonyl-pyrazine-metal(0) complex: Synthesis and characterization of cis-tetracarbonylpyrazinetrimethylphosphitetungsten(0)

Pentacarbonylpyrazinetungsten(0), (CO)₅W(pyz), is not stable in solution in polar solvents such as acetone or dichloromethane and undergoes conversion to a bimetallic complex, (CO)₅W(pyz)W(CO)₅ plus free pyrazine. These three species exist at equilibrium. Using the quantitative ¹H NMR spectroscopy, the equilibrium constant could be determined to be K_eq = (5.9 ± 0.8) × 10⁻² at 25 °C. Introducing a second pyrazine ligand into the molecule does not stabilize the complex, as cis-W(CO)₄(pyz)₂ was found to be less stable than W(CO)₅(pyz) and, therefore, could not be isolated. However, introducing trimethylphosphite as a donor ligand into the complex leads to the stabilization of the carbonyl-pyrazine-metal(0) complexes, as shown by the synthesis of cis-W(CO)₄[P(OCH₃)₃](pyz). This complex could be isolated from the reaction of the photogenerated W(CO)₄[P(OCH₃)₃](tetrahydrofuran) with trimethylphosphite upon mixing for 2 h at 10 °C in tetrahydrofuran and characterized by elemental analysis, IR, MS, ¹H, ¹³C, and ³¹P NMR spectroscopy.     

Concerning the Reaction of the Betain‐Like Compound O2CC(PPh3)2 with Tungsten‐Carbonyl Derivatives; Preparation and Crystal Structures of [(CO)5W{η1‐O2C2(PPh3)2}] and [(CO)4W{η2‐O2C2(PPh3)2}]

The carbodiphosphorane CO₂ adduct O₂CC(PPh₃)₂ ( 1a ) reacts with [(CO)₅W(THF)] and [(CO)₃W(NCEt)₃] to produce the complexes [(CO)₅W{η¹‐O₂CC(PPh₃)₂}] ( 2 ) and [(CO)₄W{η²‐O₂CC(PPh₃)₂}] ( 3 ), respectively. Whereas in 2 the betain‐like ligand is coordinated at the tungsten atom in a monodentate manner, in 3 it acts as a chelating ligand with formation of a WO₂C four‐membered ring. As a by‐product during the reaction with the acetonitrile adduct also some crystals of the hydrolysis product [HC(PPh₃)₂]₂[W₆O₁₉] · 3C₂H₄Cl₂ (4 · 3C₂H₄Cl₂) were isolated. All compounds could be characterized by X‐ray analyses and the usual spectroscopic methods.     

Chemical modifiers in arsenic determination in biological materials by tungsten coil electrothermal atomic absorption spectrometry

Palladium, iridium, and rhodium are evaluated as possible chemical modifiers in the determination of As in digest solutions of biological materials (human hair and clam) by tungsten coil electrothermal atomic absorption spectrophotometry (TCA-AAS). The modifier in solution was applied onto the coil and thermally pre-reduced; the pre-reduction conditions, the amount of modifier, and the thermal program were optimized. Palladium was not satisfactory, whereas Ir and Rh were effective modifiers and rendered better relative sensitivity for As by a factor of 1.4 and 1.9, respectively compared to the case without modifier. Upon optimization of thermal conditions for As in pre-reduced Ir (2.0 µg) and Rh (2.0 µg) modifiers and in the digest solutions of the study matrices, Rh (2.0 µg) was more effective modifier and was selected as such. The mean within-day repeatability was 2.8% in consecutive measurements (25–100 µg L^–1) (3 cycles, each of n=6) and confirmed good short-term stability of the absorbance measurements. The mean reproducibility was 4.4% (n=20 in a 3-day period) and the detection limit (3 _blank/slope) was 29 pg (n=15). The useful coil lifetime in Rh modifier was extended to 300–400 firings. Validation was by determination of As in the certified reference material (CRM) of Oyster tissue solution with a percentage relative error (E _rel%) of 2% and percentage relative standard deviation (RSD%) of 3% (n=4), and by analytical recovery of As spiked in CRM of human hair [94±8% (n=4)]. The methodology is simple, fast (sample readout frequency 21 h^–1), reliable, of low cost, and was applied to the determination of As in hair samples of exposed and unexposed workers.     

Branched and dendritic metallo-carbosiloxanes with OCH2PPh2MLn end-grafted units

A straightforward method for the preparation of metallo carbosiloxanes of type Si(OCH₂CH₂CH₂SiMe₂[OCH₂PPh₂M(CO)_n])₄ (n = 3, M = Ni, 7a; n = 4, M = Fe, 7b; n = 5: M = Mo, 7c; M = W, 7d), Si(OCH₂CH₂CH₂SiMe[OCH₂PPh₂Ni(CO)₃]₂)₄ (8) and Me₂Si(OCH₂CH₂CH₂SiMe[OCH₂PPh₂Ni(CO)₃]₂)₂ (11) is described. The reaction of Si(OCH₂CH₂CH₂SiMeXCl)₄ (1: X = Me, 2: X = Cl) or Me₂Si(OCH₂CH₂CH₂SiMeCl₂)₂ (9) with HOCH₂PPh₂ (3) produces Si(OCH₂CH₂CH₂SiMe₂(OCH₂PPh₂))₄ (4), Si(OCH₂CH₂CH₂SiMe(OCH₂PPh₂)₂)₄ (5) or Me₂Si(OCH₂CH₂CH₂SiMe(OCH₂PPh₂)₂)₂ (10) in presence of DABCO. Treatment of the latter molecules with Ni(CO)₄ (6a), Fe₂(CO)₉ (6b), M(CO)₅(Thf) (6c: M = Mo; 6d: M = W), respectively, gives the title compounds 7a-7d, 8 and 11 in which the PPh₂ groups are datively bound to a 16-valence-electron metal carbonyl fragment.The formation of analytical pure and uniform branched and dendritic metallo carbosiloxanes is based on elemental analysis, and IR, ¹H, ¹³C{¹H}, ²⁹Si{¹H} and ³¹P{¹H} NMR spectroscopic studies. In addition, ESI-TOF mass spectrometric studies were carried out.     

Mixed-metal cluster chemistry Part 20. Syntheses, crystal structures and electrochemical studies of W2Ir2(μ-L)(CO)8(η-C5H4Me)2 (L=dppe, dppf)

The 60-electron tetrahedral clusters W₂Ir₂(μ-L)(CO)₈(η⁵-C₅H₄Me)₂ [L=dppe (2), dppf (3)] have been prepared from reaction between W₂Ir₂(CO)₁₀(η⁵-C₅H₄Me)₂ (1) and the corresponding diphosphine in 52 and 66% yields, respectively. A structural study of 2 reveals that three edges of a WIr₂ face are spanned by bridging carbonyls, that the iridium-ligated diphosphine coordinates diaxially and that the tungsten-bound methylcyclopentadienyls coordinate axially and apically with respect to the plane of bridging carbonyls. A structural study of 3 reveals that the dppf ligand bridges an Ir---Ir bond which is also spanned by a bridging carbonyl; tungsten-ligated methylcyclopentadienyl ligands and terminal carbonyls result in electronic asymmetry (17e and 19e iridium atoms) in the electron-precise cluster. Both clusters show two reversible one-electron oxidation processes and an irreversible two-electron reduction; the dppf-containing cluster 3 has a further, irreversible, one-electron oxidation process. UV–vis-NIR spectroelectrochemical studies of the 2→2⁺→2²⁺ progression reveal the appearance of a low-energy transition on oxidation to 2⁺ which persists on further oxidation to 2²⁺.