含POSS侧基的非环二烯烃易位聚合及离子型杂化聚合物表征

基于七异丁基-胺丙基-多面体低聚倍半硅氧烷(POSS-NH₂)与溴丁烯或溴代十一烯反应, 一步法合成了含POSS侧基的两种杂化二烯烃. 以钌卡宾络合物为催化剂的非环二烯烃易位(ADMET)聚合, 短链二烯烃未能发生, 而长链二烯烃能顺利实现. 将杂化二烯烃转变为离子型杂化二烯烃, 其ADMET聚合活性较高, 随着反应时间延长, 聚合物分子量明显增大, 分子量分布变窄, 体现了逐步聚合的特征. 核磁共振分析揭示了聚合物的不饱和结构和聚合反应的变化过程. 主链不饱和的无定形聚合物, 经氢化作用转变为饱和的离子型杂化聚乙烯, POSS基团精确地连接在聚乙烯骨架的侧位上, 且POSS基团和聚乙烯骨架均表现出较强的结晶能力. 这种离子型杂化聚乙烯具有球形的单分子或聚集形态, 可直接构筑纳米尺度的聚合物材料.     

Phantom Ring‐Closing Condensation Polymerization: Towards Antibacterial Oligoguanidines

The first example of phantom ring‐closing condensation polymerization for the synthesis of oligoguanidines is presented. A new oligoguanidine with a ring structure was achieved in one step by the condensation reaction of a triamine, like diethylenetriamine, with guanidine hydrochloride. The condensation reaction proceeded by selective ring‐closure towards the formation of five‐membered rings in the oligomer backbone. The resulting polymer repeat unit structure was different from the starting monomers (phantom polymer) and was formed by elimination of three molecules of ammonia per repeat unit. The inter‐, intra‐, and inter‐molecular reaction sequences led to the new structure as proved by different spectroscopic techniques (atmospheric pressure chemical‐ionization mass spectrometry, and one‐dimensional and two‐dimensional homo‐ and heteronuclear correlation NMR experiments) as well as supported by quantum chemical investigations. Preliminary results regarding antibacterial use of the resulting oligoguanidine were also promising and showed its effect within 15–30 min as an antibacterial material.

     

Polyglycidol Based Amphiphilic Double‐Comb Copolymers and Their Self‐Association in Aqueous Solution

Herein, we report synthesis and self‐association properties of amphiphilic double‐comb polymers with polyglycidol backbones. First, a bifunctional polyglycidol precursor is synthesized via monomer activated anionic polymerization. Next, two efficient and orthogonal polymer analogous reactions are carried out for grafting hydrophilic oligoethylene glycol side chains and hydrophobic linear aliphatic side‐chains. The polymers are analyzed by means of NMR, GPC, and DSC. From the DSC analysis of the bulk samples it is evident that aliphatic side chains segregate from the polar backbone and thus crystallize. Furthermore, in aqueous media the double‐comb polymers spontaneously self‐assemble to form a multilayer structure. The present results pave a way to tailor and design amphiphilic polymers based on glycidols. Major advantages are spontaneous self‐assembly in water and the possibility to form onion polymersomes relevant to encapsulation.

     

Synthesis of Eight‐shaped Poly(ethylene oxide) by the Combination of Glaser Coupling with Ring‐opening Polymerization

The eight‐shaped poly(ethylene oxide) (PEO) is synthesized by a combination of Glaser coupling with ring‐opening polymerization (ROP). Firstly, the star‐shaped (PEO‐OH) ₄ is synthesized by ROP of ethylene oxide (EO) using pentaerythritol as an initiator and diphenylmethyl potassium (DPMK) as a deprotonated agent, and then the alkyne group is introduced onto the PEO arm‐end to give (PEO‐Alkyne) ₄ in a NaH/tetrahydrofuran (THF) system. The intramolecular cyclization is carried out by a Glaser coupling reaction in a pyridine/CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) system at room temperature in an air atmosphere, and eight‐shaped PEO was formed with high efficiency (almost 100%). The target polymers and intermediates were well characterized by SEC, MALDI‐TOF MS, ¹H NMR and FT‐IR in detail.

     

Nano‐emulsion use for the synthesis of polyaniline nano‐grains or nano‐fibers

We report that nano‐emulsions can be creatively used as a morphology selective synthesis method to prepare not only nano‐grains but also nano‐fibers with high selectivity. Synthesis of the two different morphological materials was demonstrated using polyaniline synthesis as a model case. Polyaniline nano‐grains were synthesized from aniline molecules in nano‐size aqueous droplets as polymerization sites whose droplets were generated by inverse water‐in‐oil nano‐emulsion use, and polyaniline nano‐fibers were synthesized from aniline in aqueous nano‐dimensional channels as polymerization sites whose channels were generated by direct oil‐in‐water nano‐emulsion use containing high population of oil droplets. Using the approaches, we successfully synthesized nano‐fibers of 60 nm diameter with 0.5 µm length and also nano‐grains having diameter of 60–80 nm. The two different polymerization sites of nano‐scale dimension were made by changing the ratio among surfactant, aqueous aniline/HCl solution, and oil, i.e. organic solvent. We found the nano‐fibers synthesized from the channels formed by the direct oil‐in‐water nano‐emulsion have higher bulk electrical conductivity than the nano‐grains which were synthesized from the droplets formed by the inverse water‐in‐oil emulsion. We also found that the emulsion use allows us to use a room temperature synthesis unlike conventional synthesis methods which require to use ice bath temperature. Physical properties of both nano‐fibers and nano‐grains synthesized were characterized by Fourier transform infrared (FTIR), UV–Vis spectra, scanning electron microscopy (SEM), and four probes conductivity measurement. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,structure characterization,and gas sensitive properties of a copolymer of aniline with phenol

A new kind of conductive copolymers of aniline with phenol was designed and synthesized by using oxidation polymerization and the results showed that the apparent inherent conductivities of the copolymers are in the range of 10^?2 to 10^?10 S/cm which covers from conductors to insulators. The results showed that the conductivity of the copolymers strongly depends on synthesis conditions, such as reaction time, molar ratios of oxidizer to monomers and aniline to phenol, concentrations of reactants, and reaction temperature. Compared to the conventional (co)polymers of aniline and its derivatives, the magnitudes of the reversible conductivity changes are very significant, about two orders, and get to the maximum readings in about 5 min when they are exposed to ammonia gas, hydrochloric acid gas, and a various vapors of organic compounds, such as methanol, alcohol, acetone, benzene, toluene, chloroform, carbon tetrachloride, etc. It should be noted that with the introduction of the weak acidic structural units into the polyaniline chains, the copolymers are reversibly responded to both acidic and basic gases promptly. Copyright © 2009 John Wiley & Sons, Ltd.     

Copper(0)‐mediated living radical polymerization of acrylonitrile at room temperature

The copper(0)‐catalyzed living radical polymerization of acrylonitrile (AN) was investigated using ethyl 2‐bromoisobutyrate as an initiator and 2,2′‐bipyridine as a ligand. The polymerization proceeded smoothly in dimethyl sulphoxide with higher than 90% conversion in 13 h at 25 °C. The polymerization kept the features of controlled radical polymerization. ¹H NMR spectra proved that the resultant polymer was end‐capped by ethyl 2‐bromoisobutyrate species. Such polymerization technique was also successfully introduced to conduct the copolymerization of styrene (St) and AN to obtain well‐controlled copolymers of St and AN at 25 °C, in which the monomer conversion of St could reach to higher than 90%. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Copolymerization of 2‐hydroxyethyl methacrylate with a comonomer with spiroacetal moiety

The study reports the synthesis of a copolymer based on 2‐hydroxyethyl methacrylate and 3,9‐divinyl‐2,4,8,10‐tetraoxaspiro[5.5]undecane (U) acquired through radical polymerization in the presence of 2,2′‐azobis(2‐methylpropionitrile). The attempt was to have a solid content as high as 10 wt %. The polymerization process was conducted in the presence of a classic ionic surfactant—sodium lauryl sulfate—and comparatively using two variants of protective colloid β‐cyclodextrin and poly(aspartic acid), respectively. The prepared dispersions were characterized from the viewpoint of their hydrodynamic radius, zeta potential, and conductivity evolution during syntheses. The mean particle size and size distribution and zeta potential and conductivity were also evaluated for the synthesized polymeric particles. The compositions of the polymers were confirmed by FTIR and ¹H NMR spectra, and also, the thermal stability of the polymeric compounds was evaluated. SEM and AFM investigations of the polymer morphology are also presented. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Unequal siblings: Adverse characteristics of naphtalene‐based hoveyda‐type second generation initiators in ring opening metathesis polymerization

A family of four different Hoveyda‐type initiators bearing a π‐extended carbene ligand was characterized regarding the activity in ring opening metathesis polymerization. One of the initiators shows high activity at ambient temperature, similar to the second generation Hoveyda–Grubbs catalyst and is even suited for the controlled polymerization of certain norbornene derivatives. The other family members exhibit a pronounced latency at room temperature, and polymerization can be triggered by heat. The scope of these initiators in the thermally triggered polymerizations of norbornene derivatives in general and dicyclopentadiene in particular was disclosed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Effects of hydration and hydrophilicity on Na‐Clay‐supported aqueous‐phase catalysis for atom transfer radical polymerization

Hydrated sodium montmorillonite (Na‐clay) has been used as a catalyst support for the heterogeneous atom transfer radical polymerization of benzyl methacrylate in the presence of various concentrations of water, reducing agent, and CuBr₂ in anisole at ambient temperature. The polymerization was promoted via reduction of Cu^II to Cu^I through the addition of sodium ascorbate (NaAsc) as a reducing agent in aqueous solution. The polymerizaton proceeded in a controlled manner and produced poly(benzyl methacylate) with moderately narrow molecular weight distribution (MWD) when performed under optimum conditions of hydration (10 wt % ≤ H₂O/Na‐clay ≤ 21 wt %) and reducing agent (0.15 ≤ [NaAsc]/[I] ≤ 0.23). The polymerization was uncontrolled if hydration and NaAsc exceed above their optimum range of concentrations. Apparent rate of the polymerization (k_app) increased in the presence of decane–anisole (1/3, v/v) mixture solvent. Selective adsorption of decane at the interfaces of the hydrated clay was attributed for the rate enhancement due to increased polymer and hydrophobic interface interaction. The polymerization progressed in a controlled manner as confirmed by the first‐order time‐conversion plot, linear increase in molecular weights, and moderately narrow MWDs over conversion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011