火焰原子吸收光谱法测定天然水中微量铁的形态

研究了用抗坏血酸为还原剂,使二价铁离子与邻菲啰啉(phen)形成螯合物,用硝基苯萃取,火焰原子吸收光谱法测定有机相中的铁。方法检出限为1.7ng·ml~(-1),回收率为98.0％～109.6％,线性范围为0～10.0μg·ml~(-1)(原水相),线性相关系数为0.9994。测定结果与ICP-AES法结果对照相对误差小于9.46％。     

A facile synthesis of 4- and 6-chloromethyl-1H-indole-2-carboxylates: replacement of a sulfonic acid functionality by chlorine

Valuable new synthetic intermediates, 4- or 6-chloromethyl-1H-indole-2-carboxylates, were prepared by the elimination of SO₂ from 2-ethoxycarbonyl-1H-indole-4- or 6-methanesulfonic acids, respectively, which are easily accessible by Fischer-type indolization.     

Engineering cytochrome P-450s

Cytochrome P-450 isozymes represent a critical component of nature’s spectrum of detoxification catalysts that could be exploited for bioremediation. The ethanol-inducible human cytochrome P-450 2E1 serves as a model eukaryotic P-450 that complements the bacterial P-450 cam in dehalogenation and detoxification of environmental pollutants. We explored the construction of novel chimeric P-450s using cytochrome P-450 camC and 2E1 genes. For construction of chimera 1 (478 amino acids, 55.14 kDa), 145 amino acids from the N-terminus of P-450 2E1 protein (493 amino acids, 56.84 kDa) were replaced with 130 amino acids from the N-terminus of P-450 camC protein (415 amino acids, 46.66 kDa). In chimera 2 (525 amino acids, 60.24 kDa) the strategy involves replacement of 28 amino acids in the C-terminus of chimera 1 with 75 amino acids from the C-terminus of P-450 camC gene. Homology models of both the chimeric proteins were developed using SWISS-MODEL based on the known crystal structure of cytochrome P-450 camC, BM-3, 1DT6A, and 2C17A. The models indicated that the proposed heme-binding site was intact, which is inevitable for catalytic activity of cytochrome P-450s. The expression of chimera 1 and 2 genes in Escherichia coli DH5α was evident from light-pink cell pellets, protein band in sodium dodecyl sulfate polyacrylamide gel electrophoresis, and diagnostic carbon monoxide-difference spectra. Our studies show that strategies can be developed to exploit the natural diversity of the P-450 superfamily to generate chimeric biocatalysts that would provide new templates amenable to directed evolution.     

非晶SiO2纳米灯笼的制备和表征

在1000 ℃用活性炭把二氧化锡粉末还原成单质锡, 锡作为催化剂, 硅片作为硅源同时作为收集衬底, 在硅片上制备出了非晶SiO2纳米灯笼. 灯笼的一端连在硅片上, 另一端为一个锡球, 中间是一些圆弧状的SiO2纳米线把两端相连. 纳米灯笼具有良好的对称性. 利用扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)、选区电子衍射(SAED) 和HRTEM自带的能谱分析仪(EDS)对样品的表面形貌、微观结构和成分进行了分析研究. 结果表明, 灯笼中SiO2纳米线为非晶态, 结点是晶态锡, 结点表面覆盖一层非晶态的硅的氧化物. 结合实验条件对纳米灯笼的生长机理进行了讨论, 提出了纳米灯笼生长的一个模型.     

Preparation of poly(N‐ethyl methacrylamide) particles via an emulsion/precipitation process: The role of the crosslinker

Monodisperse, thermosensitive poly(N‐ethyl methacrylamide) microgel particles were prepared by the batch precipitation/emulsion polymerization of water‐soluble N‐ethyl methacrylamide and the hydrophobic crosslinker ethylene glycol dimethacrylate initiated by potassium persulfate. Particular attention was paid to the effect of the crosslinker agent on the polymerization process (kinetics, conversion, and water‐soluble oligomer content). Particles were characterized in terms of their size distribution and swelling capacity. A polymerization mechanism for the water‐soluble monomer and non‐water‐soluble crosslinker is proposed and discussed on the basis of a combination of both emulsion and precipitation polymerization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1808–1817, 2002     

Determining the wax content of crude oils by using differential scanning calorimetry

By the use of differential scanning calorimetry (DSC), a new method to measure the wax content of crude oil has been developed. In this paper, the wax content of a crude oil is proposed and proved to be the Q (total thermal effect of wax precipitation in sample) ratio of the crude oil and its corresponding wax obtained by using standard acetone method, i.e. Q_oil/Q_wax. For the 14 studied crude oils with the wax content ranging from 1 to 27 wt.%, the wax contents determined by the presented method are in good agreement with those determined by standard acetone method, with an absolute average deviation of only 0.82 wt.%. This method has an advantage over reported DSC methods in which the exact dissolution or precipitation enthalpy of wax is a must. It is also found that the wax contents determined by either of the two methods show good linear relationship with the total thermal effect Q_oil, with the correlation coefficients over 0.96. According to the empirical correlations, the wax content of a crude oil can be easily determined by using the DSC total thermal effect Q_oil. In addition and more significantly, the new method can be applied to improve the accuracy in determining the amount of precipitated wax in a waxy crude oil at different temperatures.     

Synthesis and new rearrangements of 4-isoxazolin-4,5-dicarboxylic acid derivatives

Acyclic nitrones react with dimethyl acetylenedicarboxylate (DMAD) to give stable isoxazolines, from which the ones that contain electron-donating aromatic rings at the C3 position (R¹) were shown to undergo unprecedented fragmentation at room temperature, giving the R¹-aldehyde and inseparable product mixtures, probably due to the formation of highly reactive species such as iminocarbenes. Attempts to convert the isoxazolines to the corresponding stable azomethine ylides, by refluxing in toluene, again led to the same product mixtures as above (e.g., the room temperature decomposition). Isoxazolines when reacted with methoxide at room temperature afforded highly functionalised diastereomeric mixtures. Also, isoxazolines, when reacted with propylamine, gave the corresponding amides regioselectively, all of which were more stable than the parent isoxazolines.     

Determination of thiol by high-performance liquid chromatography and fluorescence detection with 5-methyl-(2-(<Emphasis Type="Italic">m</Emphasis>-iodoacetylaminophenyl)benzoxazole

A new high-performance liquid chromatographic (HPLC) method for measuring low molecular weight (LMW) thiol-containing compounds, including cysteine (CysH), glutathione (GSH), N-acetylcysteine (Nac), penicillamine (PA), and 2-mercaptoethanol (2-ME), has been developed by using 5-methyl-(2-(m-iodoacetylaminophenyl)benzoxazole (MIPBO) as fluorescence-labeling reagent. The derivatization and separation conditions have been investigated in detail. Detection limits ranging from 3.5 to 15.0 fmol were achieved for the thiols investigated in a 16 min separation with detection wavelengths 310 and 375 nm for the excitation and emission, respectively. The utility of the proposed method has been validated by measuring CysH in human urine samples.     

Electrochemical Preparation of Poly(Malachite Green) Film Modified Nafion‐Coated Glassy Carbon Electrode and Its Electrocatalytic Behavior Towards NADH,Dopamine and Ascorbic Acid

Poly(malachite green) film modified Nafion‐coated glassy carbon electrodes have been prepared by potentiodynamic cycling in malachite green solution. The pH of polymerisation solution has only minor effect on film formation. Electrochemical quartz crystal microbalance (EQCM) was used to monitor the growth of the poly(malachite green) film. Cyclic voltammogram of the poly(malachite green) film shows a redox couple with well‐defined peaks. The redox response of the modified electrode was found to be depending on the pH of the contacting solution. The peak potentials were shifted to a less positive region with increasing pH and the dependence of the peak potential was found to be 56 mV per pH unit. The electrocatalytic behavior of poly(malachite green) film modified Nafion‐coated glassy carbon electrodes was tested towards oxidation of NADH, dopamine, and ascorbic acid. The oxidation of dopamine and ascorbic acid occurred at less positive potential on poly(malachite green) film compared to bare glassy carbon electrode. In the case of NADH, the overpotential was reduced substantially on modified electrode. Finally, the feasibility of utilizing poly(malachite green) film electrode in analytical estimation of ascorbic acid was demonstrated in flow injection analysis.     

Novel Synthesis of 1,2,3-Triazoles via 1,3-Dipolar Cycloadditions of Alkynes to Azides in Ionic Liquid^＋

2-Azido-3,5-dichloropyridine and 2-azido-5-chloro-3-fluoropyridine were given by reaction of sodium azide with 2,3,5-trichloropyridine, 3,5-dichloro-2-fluoropyridine or 5-chloro-2,3-difluoropyridine in ionic liquids. 1,3-Dipolar cycloaddition of 2-azido-3,5-dichloropyridine or 2-azido-5-chloro-3-fluoropyridine to alkynes in ionic liquids afforded the corresponding 1,4,5-trisubstituted [1,2,3]-triazoles in good yields and regioselectivities.