Energy levels in doped SiGe quantum well studied by admittance spectroscopy

SiGe/Si quantum wells (QWs) with different Boron doping concentrations were grown by molecular beam epitaxy (MBE) on p-type Si(1 0 0) substrate. The activation energies of the heavily holes in ground states of QWs, which correspond to the energy differences between the heavy hole ground states and Si valence band, were measured by admittance spectroscopy. It is found that the activation energy in a heavily doped QW increases with doping concentration, which can be understood by the band alignment changes due to the doping in the QWs. Also, it is found that the activation energy in a QW with a doping concentration of 2 × 10²⁰ cm⁻³ becomes larger after annealing at a temperature of 685 °C, which is attributed to more Boron atoms activation in the QW by annealing.     

NO dissociation pathways on Rh(1 0 0), (1 1 0), and (1 1 1) surfaces: A comparative density functional theory study

The chemisorption and dissociation pathways of NO on the Rh(1 0 0), (1 1 0), and (1 1 1) surfaces are studied by the plane-wave density functional theory (DFT) with CASTEP program. In addition, the electronic and geometrical effects that affect the NO dissociation reactions have been investigated in detail. The calculation results are presented as following: The effective activation energies of the best NO dissociation pathways on the Rh(1 0 0), the Rh(1 1 0), and the Rh(1 1 1) are 0.63, 0.66 and 1.77 eV, respectively. The activity of the Rh planes for NO dissociation is in the order of Rh(1 0 0) ≈ Rh(1 1 0) > Rh(1 1 1). The low dissociation barrier for Rh(1 0 0) and Rh(1 1 0) is associated with the existence of a lying-down NO structure which acts as a precursor for dissociation. By Mulliken population analysis and structure analysis, both electronic and geometrical effects are found to affect the NO dissociation reactions, but the geometrical effect exceed the electronic. The energy decomposition scheme has been used to provide further insight into the NO dissociation reactions. Based on the calculations, the interaction energy between N and O in the transition state on the Rh(1 1 1) is found much larger than that on the Rh(1 0 0) and the Rh(1 1 0). The major differences of should originate from the variation of the bonding competition effect.     

撞击诱导硝基甲烷分子第一步分解反应的动力学计算

本文基于分子温度与压强的关系,计算在不同压强下基态和最低三态硝基甲烷的分子温度,对应计算其沿着CN键裂解反应的热化学和动力学参数.发现基态的硝基甲烷沿着CN键的分解反应是吸热反应,不具自发性,反应转换温度为1550.2 K,平衡常数在80-1202 K温度范围内很低.最低三态的硝基甲烷沿着CN键的裂解是放热反应,反应的Gibbs自由能在80-2558.5 K范围内为负,有好的自发性,且反应较为彻底.298.15-2558.5 K温度范围内反应活化能随着温度的升高而改变,使反应速率随着温度的升高而急剧增大.对应硝基甲烷爆压15 GPa,其分子温度为4617.6 K,该温度下三态分子分解反应的反应速率为1.088×10~8cm~3·mol~(-1)·s~(-1).推算硝基甲烷沿着CN键分解反应混合物的终态温度,当混合物为硝基、甲基和基态的硝基甲烷分子时,反应的终温为1611.37 K,等效能为1676.47 cm~(-1).当混合物为硝基、甲基、基态和最低三态的硝基甲烷分子时,反应的终温为1184.79 K,等效能为1232.65 cm~(-1).两种情况下终态等效能都足以维持硝基甲烷分子沿C-N键裂解反应的发生.这个能量也足以导致混合物中的NO_2分解为NO和O,这与实验检测的结论相一致.     

The effect of oxygen vacancy on the oxide ion mobility in LaAlO3-based oxides

The electrical property of (La_1−xSr_x)_1−z(Al_1−yMg_y)O_3−δ (LSAM; x≤0.3, y≤0.15 and z≤0.1) was measured using the DC four-probe method as a function of temperature (500–1000°C) and oxygen partial pressure (1–10⁻²² atm). Among LSAMs, (La_0.9Sr_0.1)AlO_3−δ showed the highest ionic conductivity, σ_i=1.3×10⁻² S cm⁻¹ at 900°C. A simultaneous substitution at A and B sites or A site deficiency is expected to create larger oxygen vacancy and higher ionic conductivity. However, it showed a negative effect. The effect of the vacancy increase did not effect monotonously the ionic conductivity. It was found that the concentration of oxygen vacancy, [V_O], influences not only the oxide ion conductivity, σ_i, but also the mobility, μ_v, of [V_O]. These properties exhibit a maximum at around [V_O]=0.05. With the increase in [V_O], the activation energy, E_a, of the ionic conduction dropped from 1.8 to ca. 1.0 eV at [V_O]=0.05 and became almost constant at [V_O]>0.05. The dependency of the pre-exponential term, μ⁰_v, and E_a on [V_O] was analyzed and their effect on μ_v and σ_i was discussed with respect to crystal structure and defect association. It was estimated that the crystal structure mainly governs these properties. The effect of defect association could not be ignored but is considered to be a complicated correlation.     

Temperature-dependent photoluminescence of vertically stacked self-assembled CdSe quantum dots in ZnSe

We studied the optical properties of multiple layers of self-assembled CdSe quantum dots (QDs) embedded in ZnSe, grown by molecular beam epitaxy. The ZnSe barrier thicknesses separating the QD layers ranged from 30 to 60 monolayers (ML). For stacks with thinnest ZnSe barriers photoluminescence (PL) measurements reveal blue shifts as large as 180 meV relative to PL observed for single QD layers. The amount of blue shift decreases with increasing barrier thickness, and for the 60 ML spacer the PL energy returns to that emitted by a single layer of QDs. Temperature dependence of the integrated intensity of the emission spectra reveals that the activation energy for PL quenching is largest for barrier thicknesses of 30 and 45 ML. We tentatively attribute these effects to a decrease in the size of the vertically stacked QDs when the thickness of the barrier layers is small.     

Thermoluminescence kinetic study of binary lead-silicate glasses

This paper describes a detailed experimental study of the thermoluminescence (TL) properties of four binary lead-silicate glasses, with PbO concentrations ranging from 32% to 62% in mole percent. The TL glow peaks between room temperature and 300 °C were analyzed using a systematic thermal cleaning technique. The T_max-T_stop and E-T_stop methods of analysis were used to identify the number of peaks under the glow curves, and to obtain the activation energy E for each TL trap. A computerized glow curve fitting analysis is used to fit the experimental data to four first-order peaks with maxima at temperatures of 54, 80, 110 and 210 °C, as measured with a heating rate of 2 °C/s. The kinetic parameters of the glow-peak at 210 °C were confirmed by using phosphorescence decay methods of analysis. The TL traps associated with the low-temperature TL peak at 54 °C are found to depend strongly on the PbO concentration of the samples, while the higher-temperature TL peaks show a behavior independent of the PbO concentration. The activation energy E and frequency factor s of the low-temperature TL trap associated with the peak at 54 °C are consistent with a trap involving a delocalized transition through the conduction band. However, the activation energies and frequency factors for the higher-temperature TL traps are consistent with traps involving localized transitions via an excited state below the conduction band. The data suggest that these higher-temperature TL traps are associated with the common silicate matrix in these binary silicate glasses.     

荧光光谱法研究蛋白质构象的电磁-温度协同效应

长期以来电磁生物效应受到人们普遍关注，近年来从各个角度进行了相关研究。电磁－温度协同效应是当前的热点。本研究通过电磁场及温度协同对蛋白质影响的研究，发现蛋白质在电磁场作用下的不可逆变性，而且这种变性也遵循Arrhenius规律，并进一步得出电磁－温度协同作用的蛋白质变性模型。本文从分子反应动力学的角度解释了电磁－温度协同效应，并对非热效应作了一定的探讨。     

Co(H2O)62+/3+体系电子转移反应动力学的理论研究

A theoretical scheme is presented which is based on an activation model for calculating the rate of the electron- exchange reaction between transition metal complexes in aqueous solution and applies to Co(H2O)6 2+/3+ electron transfer system. The activation parameter and activation energy of the system are obtained via the activation model. The slopes of the potential energy surfaces (curves) of the reacting system at the separated reactants are calculated from the fitted potential energy curves. The coupling matrix element is determined by using the perturbation theory and numerical integral method. Theoretical rate constants are obtained for the system at both UHF/6-311G and UMP2/6-311G levels. The agreement of the theoretical results with experimetal values is excellent. This fact indicates the scheme proposed is feasible and accurate in studying the self- exchange eletron transfer reaction.     

Frontispiece: Cationic Tetrylene-Iron(0) Complexes: Access Points for Cooperative,Reversible Bond Activation and Open-Shell Iron(−I) Ferrato-Tetrylenes

The open-shell cationic stannylene-iron(0) complex 4 ( 4 =[^PhiPDippSn⋅Fe⋅IPr]⁺; ^PhiPDipp={[Ph₂PCH₂Si(ⁱPr)₂](Dipp)N}; Dipp=2,6-ⁱPr₂C₆H₃; IPr=[(Dipp)NC(H)]₂C:) cooperatively and reversibly cleaves dihydrogen at the Sn−Fe interface under mild conditions (1.5 bar, 298 K), in forming bridging hydrido-complex 6 . The One-electron oreduction of the related Ge^II−Fe⁰ complex 3 leads to oxidative addition of one C−P linkage of the ^PhiPDipp ligand in an intermediary Fe^−I complex, leading to Fe^I phosphide species 7 . One-electron reduction reaction of 4 gives access to the iron(−I) ferrato-stannylene, 8 , giving evidence for the transient formation of such a species in the reduction of 3 . The covalently bound tin(II)-iron(−I) compound 8 has been characterised through EPR spectroscopy, SQUID magnetometry, and supporting computational analysis, which strongly indicate a high localization of electron spin density at Fe^−I in this unique d⁹-iron complex.     

The Indenyl Effect: Accelerated C−H Amidation of Arenes via Ind*RhIII Nitrene Transfer Catalysis**

Investigations into C−H amidation reactions catalysed by cationic half-sandwich d⁶ metal complexes revealed that the indenyl-derived catalyst [Ind*RhCl₂]₂ significantly accelerated the directed ortho C−H amidation of benzoyl silanes using 1,4,2-dioxazol-5-ones. Ring slippage involving a haptotropic η⁵ to η³ rearrangement of the indenyl complex proposedly enables ligand substitution at the metal centre to proceed via associative, rather than dissociative pathways, leading to significant rate and yield enhancements. Intriguingly, this phenomenon appears specific for C−H amidation reactions involving weakly coordinating carbonyl-based directing groups with no acceleration observed for the corresponding reactions involving strongly coordinating nitrogen-based directing groups.