Improving waterproof/breathable performance of electrospun poly(vinylidene fluoride) fibrous membranes by thermo‐pressing

Facing the ever‐increasing demand for waterproof/breathable materials, a rapid and efficient fabrication method of these functional materials with excellent performance as well as robust mechanical properties remains challenging. Herein, a simple and scalable strategy referred to as thermo‐pressing is introduced to improve the waterproof/breathable performance and mechanical properties of electrospun PVDF fibrous membranes. The synergistic effect of temperature and pressure acted on the electrospun PVDF membranes on the fiber morphology and crystal structure was investigated, which can be able to effectively enhance waterproof performance and mechanical properties, endowing the as‐prepared membranes with a modest breathability. The membranes thermo‐pressed at 150 °C with a pressure of 8.27 MPa exhibit robust tensile strength of 40.65 MPa, which is superior to those of the previous reports (below 32.8 MPa). Notably, the optimized membranes enable to show a high hydrostatic pressure of 102 kPa, good WVTR of 10.87 kg m⁻² d⁻¹ and excellent abrasion resistance, which implies that the thermo‐pressing is an efficient and facile way to steer the fiber morphology and crystal structure of electrospun membranes to improve their application performance. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 36–45     

New Far-Infrared Laser Lines and Frequency Measurements of Acetaldehyde and Vinyl Fluoride

Eight far-infrared laser lines have been obtained by optically pumping acetaldehyde (CH₃CHO) and nine by pumping vinyl fluoride (CH₂CHF) with a cw CO₂ laser. The far-infrared laser structure used a metal-dielectric waveguide cavity. This is the first reported observation of four of the laser lines in acetaldehyde. In this work, we measure the frequency, optimum pressure of operation, relative intensity, relative polarization, and pump offset from CO₂ laser-line center.     

Spectroscopy of Laser Plumes for Atto‐Mole and ng/g Elemental Analysis

Abstract

Two all‐optical analytical techniques are reviewed. Both are capable of highly sensitive multi‐element analysis. One is by means of resonance‐enhanced plasma spectroscopy. It minimizes the continuum background associated with laser‐induced plasmas. Relative to laser‐induced breakdown spectroscopy, the signal‐to‐noise ratio is improved by orders of magnitude, thus allowing the quantitation of sodium and potassium at the single blood cell level. The other technique utilizes laser‐excited atomic fluorescence. It has been traditionally handicapped by its one wavelength–one transition specificity. We showed, however, that numerous elements could be induced to fluoresce at a single excitation wavelength of 193 nm provided that the analytes were imbedded in dense plumes, such as those produced by pulsed laser ablation. This method eliminates the continuum plasma background and sub‐ppb sensitivity was demonstrated in the analysis of aqueous lead colloids.     

BaSnF4 fast ion conductor: Variations versus the method of preparation and anomalous temperature variation of the quadrupole splitting

A new method of preparation of high performance fluoride ion conductor, BaSnF₄, by water leaching of newly discovered barium tin(II) chloride fluorides, has been designed, and the materials have been studied and compared to the solid prepared by the usual dry method. The unit-cell parameters and crystallite dimensions were found to vary with the method of preparation. In addition, the crystallite dimensions were found to be highly anisotropic for the samples obtained by the wet method. The Mössbauer spectrum is made of a large tin(II) quadrupole doublet, and a broad tin(IV) oxide peak due to surface oxidation. The tin(II) spectrum is in agreement with covalently bonded tin(II) having a strongly stereoactive lone pair. An unusually high dependence of the quadrupole splitting at low temperatures was observed (5.8 times larger than for α-SnF₂).     

氟化氢铵消解-电感耦合等离子体质谱(ICP-MS)法测定地球化学样品中的钨锡钼

建立了氟化氢铵消解地球化学样品,电感耦合等离子体质谱(IC P-M S)法测定样品中钨、锡和钼的方法.方法经过国家土壤和水系沉积物标准参考物质验证,方法的检出限钨为0.048μg/g、锡为0.079μg/g、钼为0.063μg/g,准确度(相对误差)钨为0.64％ ～6.28％、锡为0.29％ ～3.74％、钼为2.1...     

Chemo- and Site-Selective Electro-Oxidative Alkane Fluorination by C(sp3)−H Cleavage

Electrochemical fluorinations of C(sp³)−H bonds with a nucleophilic fluoride source have been accomplished in a chemo- and site-selective fashion, avoiding the use of electrophilic F⁺ sources and stoichiometric oxidants. The introduced metal-free strategy exhibits high functional group tolerance, setting the stage for late-stage fluorinations of biorelevant motifs. The synthetic utility of the C(sp³)−H fluorination was reflected by subsequent one-pot arylation of the generated benzylic fluorides.     

聚偏氟乙烯微孔膜的亲水化改性及功能化研究进展

聚偏氟乙烯(PVDF)微孔膜的亲水化改性方法有物理共混、化学共聚、表面涂覆、表面化学处理、表面接枝等几种。其中物理共混和表面涂覆法比较成熟且已获得应用，而PVDF微孔膜的表面化学处理、等离子体或光引发改性技术以及环境敏感性等将成为PVDF微孔膜的改性和功能化研究的主要方向。     

The Activation of Sulfur Hexafluoride at Highly Reduced Low‐Coordinate Nickel Dinitrogen Complexes

The greenhouse gas sulfur hexafluoride is the common standard example in the literature of a very inert inorganic small molecule that is even stable against O₂ in an electric discharge. However, a reduced β‐diketiminate nickel species proved to be capable of converting SF₆ into sulfide and fluoride compounds at ambient standard conditions. The fluoride product complex features an unprecedented [NiF]⁺ unit, where the Ni atom is only three‐coordinate, while the sulfide product exhibits a rare almost linear [Ni(μ‐S)Ni]²⁺ moiety. The reaction was monitored applying ¹H NMR, IR and EPR spectroscopic techniques resulting in the identification of an intermediate nickel complex that gave insight into the mechanism of the eight‐electron reduction of SF₆.     

Novel Fluorescent Chemosensor for Detection of F− Anions Based on a Single Functionalized Pillar[5]arene Iron(III) Complex

Novel fluorescent chemosensor with good selectivity for F^? anion was designed and synthesized. The sensor has a bearing on a single functionalized pillar[5]arene and Fe³⁺ metal complex (PN‐Fe), which showed prominent fluorescent response for F^? anion over other common anions (Cl^?, Br^?, I^?, AcO^?, HSO4^?, H₂PO₄^?, ClO₄^?, CN^? and SCN^?). These results were evaluated by fluorescent method. The detection limit of PN‐Fe to F^? was calculated to be 2.50×10^?7 mol/L. Moreover, the sensor PN‐Fe³⁺ might serve as a recyclable component in sensing materials.     

Construction of Renewable Superhydrophobic Surfaces via Thermally Induced Phase Separation and Mechanical Peeling

We report a simple preparation method of a renewable superhydrophobic surface by ther-mally induced phase separation (TIPS) and mechanical peeling. Porous polyvinylidene fluo-ride (PVDF) membranes with hierarchical structures were prepared by a TIPS process under different cooling conditions, which were confirmed by scanning electron microscopy and mer-cury intrusion porosimetry. After peeling off the top layer, rough structures with hundreds of nanometers to several microns were obtained. A digital microscopy determines that the surface roughness of peeled PVDF membranes is much higher than that of the original PVDF membrane, which is important to obtain the superhydrophobicity. Water contact angle and sliding angle measurements demonstrate that the peeled membrane surfaces display super-hydrophobicity with a high contact angle (152°) and a low sliding angle (7.2°). Moreover, the superhydrophobicity can be easily recovered for many times by a simple mechanical peel-ing, identical to the original superhydrophobicity. This simple preparation method is low cost, and suitable for large-scale industrialization, which may offer more opportunities for practical applications.