The comparison of ZnO nanowire detectors working under two wavelengths of ultraviolet

Schottky-barrier ultraviolet (UV) detectors based on ZnO-nanowires (NWs) were fabricated with Pt as electrodes in this investigation. The ZnO NWs synthesized by the hydrothermal method were characterized by field-emission scanning electron microscopy (FE-SEM), Raman and PL spectroscopy. Photoelectric properties under 254 and 365 nm UV light were investigated. It is found that the photo-response properties of the devices under 365 nm UV light are better than those under 254 nm UV light, which is further illustrated by light transmission theory, energy-band diagram and absorption spectra. The results demonstrate that ZnO NWs detectors with selectivity to near-UV (NUV) light are promising candidates in photoelectric devices.     

Cooperative effect of La-doping and template on surface photoelectron characteristics of mesoporous nano-TiO2

A mesoporous La-doped nano-TiO₂ was prepared by the sol-gel method using polyethylene glycol as the template. A combination of surface photovoltaic (SPV) and photoacoustic technologies, aided by laser Raman technology, was used to probe the photoexcited charge transfer transition behaviors in the surface space charge region of the sample. The results confirm that the lanthanum doping was responsible for inhibiting the transformation from the anatase to rutile form and grain growth, thus strengthening the microstructure that was formed after removal of the template clearly. The experiment reveals that appropriate La-doping resulted in an obvious increase in the SPV response. By contrast, the remainder of the template had a somewhat negative effect on the SPV response of the samples. The effect of both the La-doping and the removal of the template on the nonradiative de-excitation process of the main band-gap can be negligible, in spite of the nonradiative de-excitation processes of the sub-band-gap of the La-undoped sample, in which the surface states possessed the donor characteristic, being more obvious than that of the La-doped samples. The results showed that the electron-phonon interactions on the surfaces resulting from the nonradiative de-excitation process were closely dependent on the effect of quantum confinement of the mesoporous nano-TiO₂.     

Addendum to “Switching effect and the metal–insulator transition in electric field” by A.L. Pergament et al. [J. Phys. Chem. Solids 71 (2010) 874]

In the paper mentioned above we reported on the switching mechanism in vanadium dioxide which was shown to be based on the electronically-induced Mott insulator-to-metal transition occurring in conditions of the non-equilibrium carrier density excess in the applied electric field, and the proposed model involved the dependence of the carrier density n on electric field (the Poole–Frenkel effect), as well as the dependence of the critical electric field on n. The data on the n(T) dependence were obtained on the assumption of a temperature-independent carrier mobility μ, and the problem of n reduction at lower temperatures was not fully understood. In this Letter we revisit this problem in the light of some recent data on the μ(T) dependence for VO₂. It is shown that the adjusted values of n, taking into account this μ(T), correspond to the Mott critical density within an order of magnitude.     

BaCO3 mediated modifications in structural and magnetic properties of natural nanoferrites

Preparing M-type barium hexaferrite and improving the magnetic response of natural ferrites by incorporating barium carbonate (BaCO₃) is ever-demanding. Series of barium carbonate doped ferrites with composition (100−x)Fe₃O₄·xBaCO₃ (x=0, 10, 20, 30 wt%) are prepared through solid state reaction method and sintered gradually at temperatures of 800 and 1000 °C. Nanoparticles of natural ferrite and commercial BaCO₃ are used as raw materials. Impacts of BaCO3 on structural and magnetic properties of these synthesized ferrites are inspected. The obtained ferrites are characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM) at room temperature. Uniform barium hexaferrite particles in terms of both morphology and size are not achieved. The average crystallite size of BaFe₁₂O₁₉ is observed to be within 30–600 nm. The sintering process results phase transformation from Fe₃O₄ (magnetite) to α-Fe₂O₃ (hematite) and the formation of hexagonal barium ferrite crystals. The occurrence of barium crystal is found to enhance with the increase of BaCO₃ concentrations up to 20 wt% and suddenly drop at 30 wt%. Saturation and remanent magnetization of the doped ferrites are significantly augmented up to 16.37 and 8.92 emu g⁻¹, respectively compared to their pure counterpart. Furthermore, the coercivity field is slightly decreased as BaCO₃ concentrations are increased. BaCO₃ mediated improvements in the magnetic response of natural ferrites are demonstrated.     

Study of solid-state reactions in Sm(Co,Fe, Cu,Zr)z 2:17-type alloys by means of in situ electrical resistivity measurements

In the present work, solid-state reactions in Sm₂(Co, Fe, Cu, Zr)₁₇-type alloys have been investigated by means of in situ electrical resistivity measurements. Changes in the electrical resistivity of a Sm(Co_0.74Fe_0.1Cu_0.12Zr_0.04)_8.5 alloy after solid solution treatment at 1190 °C, quenching to room temperature, and during isothermal ageing at temperatures between 400 and 900 °C, have indicated microstructural/phase changes occurring at temperatures below those commonly used for the development of high coercivity in Sm(Co, Fe, Cu, Zr)_z-type materials. Subsequent crystallographic and magnetic transition measurements have shown a high degree of correlation with respect to the changes observed in the electrical resistivity during isothermal ageing.     

Temperature dependence of thermal property for lead nitrate crystal

Thermal property was measured in a lead nitrate crystal, Pb(NO₃)₂, at temperatures from 90 to 340 K by use of ac calorimetry technique. The heat capacity derived from the measurements showed temperature dependence with thermal hysteresis, in the temperature region from 240 to 300 K. The anomaly of the heat capacity was found in the vicinity of 275.22 K. The broad temperature variation in the heat capacity was observed in the region from 235 to 260 K.     

Effect of preparation and metal content on the introduction of Fe in BEA zeolite, studied by DR UV-vis, EPR and Mössbauer spectroscopy

Fe-containing SiBEA zeolites were prepared by a two-step postsynthesis method: creation of vacant T-sites by dealumination of tetraethylammonium BEA zeolite with nitric acid and then impregnation of the resulting SiBEA zeolite with an aqueous solution of Fe(NO₃)₃. X-ray diffraction shows that iron is incorporated in SiBEA at lattice sites. The presence of Fe in its oxidation state +3 and at isolated tetrahedral sites for low metal content, was demonstrated by diffuse reflectance UV-vis, EPR and Mössbauer spectroscopy. For high iron content, diffuse reflectance UV-vis and Mössbauer spectra revealed the additional presence of extra-lattice FeO_x oligomers and superparamagnetic Fe-oxyhydroxide. Mössbauer spectroscopy identified superparamagnetic Fe-oxyhydroxide as the main phase when basic conditions are used for the preparation.     

Detection of acoustic emission and simultaneous observation of nuclear quadrupole resonance in the α ⇋ β phase transition of paradichlorobenzene

Acoustic emission has been observed in the α ? β transition of monocrystalline samples of paradichlorobenzene. No acoustic emission has been detected in the β → α transition of single crystals nor in the α ? β transitions in polycrystalline samples. The simultaneous observation of acoustic emission and Nuclear Quadrupole Resonance when several α ? β transition cycles are carried out reveals some features of this solid state phase transition.     

The formation of oxide nanoparticles on the surface of natural clinoptilolite

Nanoparticles of NiO, ZnO and Cu₂O crystallize when the Ni-, Zn- and Cu-exchanged natural clinoptilolite, respectively, are dehydrated by heating in air at 550 °C. The dehydration of Mn-exchanged clinoptilolite does not lead to the crystallization of manganese oxide but affects the crystallinity of the host clinoptilolite lattice, which becomes amorphous. The NiO, ZnO and Cu₂O nanoparticles are found to be randomly dispersed in the clinoptilolite matrix. The particle size varies from 2 to 5 nm and exceeds the aperture of the clinoptilolite channel (approximately 0.4 nm), suggesting that the crystallization of the oxide phases takes place on the surfaces of clinoptilolite microcrystals.     

Spin-glass behavior and magnetocaloric effect in melt-spun TbCuAl alloys

Magnetic properties and magnetocaloric effects of amorphous and crystalline TbCuAl ribbons are investigated by measuring their ac susceptibilities including a nonlinear term and dc magnetizations. The in-phase third harmonic ac susceptibility is found to be negative. It can be well fitted by the expression at high temperatures, indicating a spin-glass behavior in amorphous TbCuAl alloy. ΔT_f(ω)/[T_f(ω)Δlog₁₀ω], a possible distinguishing criterion to judge the presence of a spin-glass behavior is ∼0.011. The frequency-dependent data can be well fitted by the conventional critical slowing down law and the spin-glass transition temperature is obtained to be 20.1 K. The maximum of magnetic entropy change reaches 4.5 J kg⁻¹ K⁻¹ for a field change of 0-50 000 Oe, while the crystalline TbCuAl compound experiences a simple ferromagnetic-to-paramagnetic phase transition. The peak value of magnetic entropy change is obtained at the Curie temperature and reaches 14.4 J kg⁻¹ K⁻¹ for the same field change, which is much larger than that of amorphous TbCuAl alloy.