Proton magnetic relaxation study of water orientation around I− and Li+

Proton relaxation time measurements are performed for 6m aqueous solutions of⁷LiI and⁶LiI in D₂O containing small amounts of H₂O. The measurements are done at low temperatures and yield maxima of the relaxation rate plotted against 1/T. From the maxima of the relaxation rates, proteon-I^– and proton-Li⁺ distances in the first coordination sphere of the ions are determined, and from the knowledge of the ion-water oxygen distance it is shown that for iodide a somewhat broadened H-bonded configuration is valid and that for Li⁺ the electric dipole orientation deviates from the radial direction. In order to test the reliability of the method a proton-¹²⁷I interaction study is also performed in KI solution in glycerol. The I-H distance obtained is in satisfactory agreement with that found in the aqueous system.     

Adsorption of ionic surfactants on polar surfaces with a low content of chemically adsorbed alkyl chains

Colloidal silica and titanium dioxide were surface-modified by chemisorption of octadecyl dimethylmethoxy silane. The surface density of these alkyl silane groups was adjusted to less than 7% of the available surface hydroxyls, leaving the adsorbents hydrophilic and electrically charged in aqueous solution.Ionic surfactants (tetradecylpyridinium chloride and sodium lauryl sulfate) are adsorbed onto the surface-modified silica and titanium dioxide from aqueous solution, even in the case where the surface of the adsorbents exhibits the same sign of electrical charge as the surfactant ionic head groups. According to the adsorption model of Gu the chemiadsorbed alkyl chains are supposed to serve as anchors for small surface aggregates of the ionic surfactants.     

A lyotropic nematic phase of lamellar micelles (N L) obtained by a non-ionic surfactant in aqueous solution

A non ionic surfactant with a rigid rod-like hydrophobic group has been synthesized. Owing to the molecular geometry of the surfactant only lamellar micelles are formed in aqueous solution.This system exhibits a lyotropic nematic phase (N _L), which for the first time has been found for a binary non ionic surfactant/water system.Herrn Professor Dr. H.-G. Kilian mit herzlichen Glückwünschen zum 60. Geburtstag gewidmet.     

Partial molal volumes of ions in organic solvents from ultrasonic vibration potential and density measurements. III. Dimethylsulfoxide

The partial molal volumes of Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Cl^–, Br^–, I^–, and NO ₃ ^- in DMSO at 25°C have been determined from ultrasonic vibration potential data and density data for solutions of uni-univalent electrolytes. Hepler's semiemprirical equation has been used to split ionic partial molal volumes into geometric and electrostrictive contributions. The results obtained in this work confirm the conclusion of our previous studies, namely, that the contribution of electrostriction is essentially determined by the properties of that layer of atoms, 0.3 to 0.4 nm thick, in contact with the ion and by the degree of steric hindrance of the poles of the dipole of the solvent molecule. On the other hand, the geometric contribution depends on the size of the solvent molecule and also on the arrangement of the solvent molecules about the ions. It is shown that the geometric contribution to the partial molal volume of ions is largely increased when ions cannot come close enough to the poles of the solvent-molecule dipole, owing to steric hindrance.     

Use of 1-alkyl-3-methylimidazolium hexafluorophosphate room temperature ionic liquids as chelate extraction solvent with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione

Possible use of room temperature ionic liquids (RTILs) as chelate extraction solvent was evaluated by using 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF₆]) and 1-octyl-3-methylimidazolium hexafluorophosphate ([omim][PF₆]). These RTILs showed high extraction performance for divalent metal cations with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione (Htta). The extracted metals were back-extracted into 1 mol dm⁻³ nitric acid quantitatively. Furthermore, the extracted species were estimated as neutral hydrated complexes M(tta)₂(H₂O)_n (n= 1 or 2) for M = Ni, Cu and Pb and anionic complexes M(tta)₃⁻ for M = Mn, Co, Zn and Cd.     

The dissociation quotients of formic acid in sodium chloride solutions to 200°C

The dissociation quotients of formic acid were measured potentiometrically from 25 to 200°C in NaCl solutions at ionic strengths of 0.1, 0.3 1.0, 3.0, and 5.0 mol-kg^–1. The experiments were carried out in a concentration cell with hydrogen electrodes. The resulting molal acid dissociation quotients for formic acid, as well as a set of infinite dilution literature values and a calorimetrically-determined enthalpy of reaction, were fitted by an empirical equation involving an extended Debye Hückel term and seven adjustable parameters involving functions of temperature and ionic strength. This regressional analysis yielded the following thermodynamic quantities for 25°C: logK=–3.755±0.002, H^o=–0.09±0.15 kJ-mol^–1, S^o=–72.2±0.5 J-K^–1-mol^–1, and C _p ^o =–147±4 J-K^–1-mol^–1. The isocoulombic form of the equilibrium constant is recommended for extrapolation to higher temperatures.     

The Studies of the Heterogeneous Properties of Solid Surfaces by Means of the Derivatograph Q-1500 D

A simple method has been adopted to obtain an important information on the heterogeneous properties of materials studied, adsorbed liquid films and liquid-solid interactions. The method utilizes Q-TG mass loss and the first derivative Q-DTG mass loss curves with respect to temperature and time obtained during programmed liquid thermodesorption in quasi-isothermal conditions. The values of the adsorption capacity, total porosity of material, the value of active centers, desorption energy distribution and mesopore-size distribution functions obtained by this method are in good agreement with those estimated on the basis of independent methods. The theoretical and experimental results provided novel and unique data on the heterogeneity of solid surfaces, properties of liquid adsorbed films and thermal stability of the liquid/solid interfaces. This paper presents the more important results obtained so far in the studies the liquid/solid systems by means of the Paulik's classical and quasi-isothermal techniques. This revised version was published online in July 2006 with corrections to the Cover Date.     

Single-Stage Extraction and Separation of Co2+ from Ni2+ Using Ionic Liquid of [C4H9NH3][Cyanex 272]

The purpose of this study was to optimize the extraction conditions for separating Co²⁺ from Ni²⁺ using N-butylamine phosphinate ionic liquid of [C₄H₉NH₃][Cyanex 272]. A Box–Behnken design of response surface methodology was used to analyze the effects of the initial pH, extraction time, and extraction temperature on the separation factor of Co²⁺ from sulfuric acid solution containing Ni²⁺. The concentrations of Co²⁺ and Ni²⁺ in an aqueous solution were determined using inductively coupled plasma-optical emission spectrometry. The optimized extraction conditions were as follows: an initial pH of 3.7, an extraction time of 55.8 min, and an extraction temperature of 330.4 K. The separation factor of Co²⁺ from Ni²⁺ under optimized extraction conditions was 66.1, which was very close to the predicted value of 67.2, and the error was 1.7%. The equation for single-stage extraction with high reliability can be used for optimizing the multi-stage extraction process of Co²⁺ from Ni²⁺. The stoichiometry of chemical reaction for ion-exchange extraction was also investigated using the slope method.     

Gold Nanoparticles as Effective ion Traps in Poly(dimethylsiloxane) Cross-Linked by Metal-Ligand Coordination

At this time, the development of advanced elastic dielectric materials for use in organic devices, particularly in organic field-effect transistors, is of considerable interest to the scientific community. In the present work, flexible poly(dimethylsiloxane) (PDMS) specimens cross-linked by means of ZnCl₂-bipyridine coordination with an addition of 0.001 wt. %, 0.0025 wt. %, 0.005 wt. %, 0.04 wt. %, 0.2 wt. %, and 0.4 wt. % of gold nanoparticles (AuNPs) were prepared in order to understand the effect of AuNPs on the electrical properties of the composite materials formed. The broadband dielectric spectroscopy measurements revealed one order of magnitude decrease in loss tangent, compared to the coordinated system, upon an introduction of 0.001 wt. % of AuNPs into the polymeric matrix. An introduction of AuNPs causes damping of conductivity within the low-temperature range investigated. These effects can be explained as a result of trapping the Cl⁻ counter ions by the nanoparticles. The study has shown that even a very low concentration of AuNPs (0.001 wt. %) still brings about effective trapping of Cl⁻ counter anions, therefore improving the dielectric properties of the investigated systems. The modification proposed reveals new perspectives for using AuNPs in polymers cross-linked by metal-ligand coordination systems.