A mild and efficient rhenium-catalyzed transfer hydrogenation of terminal olefins using alcoholysis of amine-borane adducts as a reducing system

[ReBr₂(NO)(CH₃CN)(PTA)₂] (PTA = 1, 3, 5-triaza-7-phosphaadamantane) catalyzes the alcoholysis of ammonia-borane and amine-boranes and the catalytic transfer hydrogenations of various terminal olefins. Excellent yields were achieved at 70 °C in isopropanol using tBuOK as a co-catalyst affording TOF values up to 396 h⁻¹.     

软模板合成有序介孔碳材料

有序介孔碳材料由于其较大的表面积、均一的孔径、良好的热稳定性和化学稳定性,广泛应用于吸附、分离、催化以及能量储存等众多领域。与传统的以硅基介孔材料为硬模板的反向复制方法相比,通过嵌段共聚物和聚合物前驱体之间的有机-有机自组装的软模板法简便易行,已成为合成有序介孔碳材料有效方法。本论文综述了介孔碳材料的软模板合成机制、合成方法、功能化及其应用,对合成技术、结构控制、孔径调控以及形貌控制等方面进行了讨论,并探讨了其在吸附、催化、电极材料等领域的应用。     

Copper‐Catalyzed Aerobic Oxidative Reaction of Sulfonyl Hydrazides with Alcohols: An Easy Access to Sulfinates

A Cu‐catalyzed aerobic oxidative reaction between sulfonyl hydrazides and alcohols has been developed. In this reaction, sulfonyl hydrazides act as the sulfinic acid precursors to react with alcohols, resulting in sulfinic esters with up to 72 % yield. This catalytic system tolerates a wide range of sulfonyl hydrazide substrates, and represents a new strategy for the transformation of readily available sulfonyl hydrazides.     

Arene‐Limited Nondirected C−H Activation of Arenes

The nondirected C(sp²)−H activation of simple arenes has advanced significantly in recent years through the discovery of new catalyst systems that are able to perform transformations with the arene as the limiting reagent. Important developments in catalyst and ligand design that have improved reactivity and selectivity are reviewed.     

Nanoscopic Porous Iridium/Iridium Dioxide Superstructures (15 nm): Synthesis and Thermal Conversion by In Situ Transmission Electron Microscopy

Porous particle superstructures of about 15 nm diameter, consisting of ultrasmall nanoparticles of iridium and iridium dioxide, are prepared through the reduction of sodium hexachloridoiridate(+IV) with sodium citrate/sodium borohydride in water. The water-dispersible porous particles contain about 20 wt % poly(N-vinylpyrrolidone) (PVP), which was added for colloidal stabilization. High-resolution transmission electron microscopy confirms the presence of both iridium and iridium dioxide primary particles (1–2 nm) in each porous superstructure. The internal porosity (≈58 vol%) is demonstrated by electron tomography. In situ transmission electron microscopy up to 1000 °C under oxygen, nitrogen, argon/hydrogen (all at 1 bar), and vacuum shows that the porous particles undergo sintering and subsequent compaction upon heating, a process that starts at around 250 °C and is completed at around 800 °C. Finally, well-crystalline iridium dioxide is obtained under all four environments. The catalytic activity of the as-prepared porous superstructures in electrochemical water splitting (oxygen evolution reaction; OER) is reduced considerably upon heating owing to sintering of the pores and loss of internal surface area.     

Catalytic Generation and Chemoselective Transfer of Nucleophilic Hydrides from Dihydrogen

Copper(I)–N-heterocyclic-carbene (NHC) complexes enabled the catalytic generation of nucleophilic hydrides from dihydrogen (H₂) and their subsequent transfer to allylic chlorides. The highly chemoselective catalyst displayed no concomitant hydrogenation reactivity; in fact, the terminal double bond formed in the hydride transfer remained intact. Switching to deuterium gas (D₂) allowed for regioselective monodeuteration with excellent isotope incorporation.     

Are Two Metal Ions Better than One? Mono- and Binuclear α-Diimine-Re(CO)3 Complexes with Proton-Responsive Ligands in CO2 Reduction Catalysis

Here, the reduction chemistry of mono- and binuclear α-diimine-Re(CO)₃ complexes with proton responsive ligands and their application in the electrochemically-driven CO₂ reduction catalysis are presented. The work was aimed to investigate the impact of 1) two metal ions in close proximity and 2) an internal proton source on catalysis. Therefore, three different Re complexes, a binuclear one with a central phenol unit, 3 , and two mononuclear, one having a central phenol unit, 1 , and one with a methoxy unit, 2 , were utilised. All complexes are active in the CO₂-to-CO conversion and CO is always the major product. The catalytic rate constant k_cat for all three complexes is much higher and the overpotential is lower in DMF/water mixtures than in pure DMF (DMF=N,N-dimethylformamide). Cyclic voltammetry (CV) studies in the absence of substrate revealed that this is due to an accelerated chloride ion loss after initial reduction in DMF/water mixtures in comparison to pure DMF. Chloride ion loss is necessary for subsequent CO₂ binding and this step is around ten times faster in the presence of water [ 2 : k^Cl(DMF)≈1.7 s⁻¹; k^Cl(DMF/H₂O)≈20 s⁻¹]. The binuclear complex 3 with a proton responsive phenol unit is more active than the mononuclear complexes. In the presence of water, the observed rate constant k_obs for 3 is four times higher than of 2 , in the absence of water even ten times. Thus, the two metal centres are beneficial for catalysis. Lastly, the investigation showed that the phenol unit has no impact on the rate of the catalysis, it even slows down the CO₂-to-CO conversion. This is due to an unproductive, competitive side reaction: After initial reduction, 1 and 3 loose either Cl⁻ or undergo a reductive OH deprotonation forming a phenolate unit. The phenolate could bind to the metal centre blocking the sixth coordination site for CO₂ activation. In DMF, O−H bond breaking and Cl⁻ ion loss have similar rate constants [ 1 : k^Cl(DMF)≈2 s⁻¹, k^OH≈1.5 s⁻¹], in water/DMF Cl⁻ loss is much faster. Thus, the effect on the catalytic rate is more pronounced in DMF. However, the acidic protons lower the overpotential of the catalysis by about 150 mV.     

Copper-Catalyzed Electrophilic Thiolation of Organozinc Halides by Using N-Thiophthalimides Leading to Polyfunctional Thioethers

(Hetero)aryl, benzylic, and alkyl zinc halides were thiolated with N-thiophthalimides at 25 °C within 1 h in the presence of 5–10 % Cu(OAc)₂ ⋅ H₂O to furnish the corresponding polyfunctionalized thioethers in good yields. This electrophilic thiolation was extended to the introduction of trifluoromethylthio (SCF₃), thiocyanate (SCN), and selenophenyl (SePh) groups. The utility of this method was shown in a seven-step synthesis of a potent cathepsin D inhibitor in 34 % overall yield.     

Lewis Acid Transition-Metal-Catalyzed Hydrogen Activation: Structures,Mechanisms, and Reactivities

As a new type of bifunctional catalyst, the Lewis acid transition-metal (LA-TM) catalysts have been widely applied for hydrogen activation. This study presents a mechanistic framework to understand the LA-TM-catalyzed H₂ activation through DFT studies. The mer(trans)-homolytic cleavage, the fac(cis)-homolytic cleavage, the synergetic heterolytic cleavage, and the dissociative heterolytic cleavage should be taken as general mechanisms for the field of LA-TM catalysis. Four typical LA-TM catalysts, the Z-type κ⁴-L₃B-Rh complex tri(azaindolyl)borane-Rh, the X-type κ³-L₂B-Co complex bis-phosphino-boryl (PBP)-Co, the η²-BC-type κ³-L₂B-Pd complex diphosphine-borane (DPB)-Pd, and the Z-type κ²-LB-Pt complex (boryl)iminomethane (BIM)-Pt are selected as representative models to systematically illustrate their mechanistic features and explore the influencing factors on mechanistic variations. Our results indicate that the tri(azaindolyl)borane-Rh catalyst favors the synergetic heterolytic mechanism; the PBP-Co catalyst prefers the mer(trans)-homolytic mechanism; the DPB-Pd catalyst operates through the fac(cis)-homolytic mechanism, whereas the BIM-Pt catalyst tends to undergo the dissociative heterolytic mechanism. The mechanistic variations are determined by the coordination geometry, the LA-TM bonding nature, the electronic structure of the TM center, and the flexibility or steric effect of the LA ligands. The presented mechanistic framework should provide helpful guidelines for LA-TM catalyst design and reaction developments.