Low sintering temperature MnZn-ferrites for power applications in the frequency region of 400 kHz

In this paper, the effect of cubic zinc metaborate Zn₄O(BO₂)₆ on the sintering of MnZn-ferrites for medium frequency power applications is investigated. Zinc metaborate is synthesized in the laboratory using zinc oxide and boric acid as metal precursors. As observed, when zinc metaborate is added to the MnZn-ferrites at an optimum amount of 0.02 wt%, it significantly enhances densification and therefore allows, for a given density, reduction of the firing temperature by almost 200 °C. MnZn-ferrites exhibiting power losses of 70 mW/cm³ (measured at a frequency of 400 kHz, magnetic field 50 mT and temperature of 90 °C) are synthesized from conventionally milled powders with average particle diameter 0.6 μm, compacted and fired at 1100 °C. Identical experiments conducted under the same conditions on specimens without zinc metaborate additions revealed power losses greater than 300 mW/cm³, because of insufficient densification.     

二分量高温超导机理

用两种电子态,讨论了金属—绝缘相变、反铁磁性—金属相变,以及相分离、正常态—超导态相变、非费米液体行为、高Tc等 关键词： 两种电子态 格林函数 玻色化 高温超导     

微型热驱动热声热机热端换热器的优化设计

该文基于热声环境,采用厘米级扁管和deltaE数值计算对微型热声换热器进行了优化设计。     

Experience Gained Using Second-Moment Closure Modeling for Transitional Flows Due to Boundary Layer Separation

This paper presents detailed information on the experience gained during the attempts to model a set of transitional flows due to boundary layer separation. These flows are developed on a flat plate with a semi-circular leading edge and they have been coded by the ERCOFTAC Special Interest Group on Transition, as T3L flows. Different freestream velocities and turbulence intensities configure these transitional flows and, by consequence, govern the transition mechanism, resulting in larger or smaller transitional regions. The modeling of the T3L flows has been performed by adopting a low-Reynolds number second-moment closure turbulence model. The results showed satisfactory agreement with the experimental measurements, although some difficulties regarding successful convergence have been faced. The final conclusion is that turbulence modeling can present quite accurate results for transitional flows without any additional use of ad-hoc modifications or additional equations based on various transition models and intermittency transport modeling.     

Thermal stability of poly(mono-n-alkylitaconates) and mono-n-alkylitaconate-co-vinylpyrrolidone copolymers I

Poly(monoitaconates) containing octyl, decyl and dodecyl groups and random monoalkylitaconate-co-vinylpyrrolidone copolymers were studied by thermogravimetric analysis. Copolymers of mono-n-octylitaconate (MOI), mono-n-decylitaconate (MDI), and mono-n-dodecylitaconate (MDoI), respectively, with N-vinyl-2-pyrrolidone (VP) of different compositions were studied by dynamic thermogravimetric analysis. The thermal stability of the copolymers depends on the structure of the monoitaconate comonomer and on the composition of the copolymer The kinetic analysis of the degradation data shows that the thermal decomposition of these copolymers can be described by several kinetic orders depending on the copolymer and on the composition. The relative thermal stability of the copolymers increases as the VP content increases and as the length of the side chain of the itaconate increases, following the same trend as the flexibility of the copolymers in solution.     

The excited states of pyrazine: A basis set study

Summary Multiconfigurational second order perturbation theory (CASSCF/CASPT2) has been used to investigate the dependence of computed valence excitation energies and transition moments on the basis sets. Pyrazine has been selected as the test molecule. Atomic normal orbital (ANO) type basis sets are used throughout. Contractions of the structure (4s3p1d/2s) are found to be an optimal compromise between the quality and the size of the calculations and are capable of yielding results virtually identical to more extended basis sets.     

Microbial Baeyer-Villiger Oxidation of Ketones by Cyclohexanone and Cyclopentanone Monooxygenase – A Computational Rational for Biocatalyst Performance

Summary. Recombinant Escherichia coli overexpressing Pseudomonas sp. NCIMB 9872 cyclopentanone monooxygenase (CPMO, EC 1.14.13.16) and Acinetobacter sp. NCIMB 9871 cyclohexanone monooxygenase (CHMO, EC 1.14.13.22) have been utilized in whole-cell Baeyer-Villiger biotransformations of prochiral bicycloketones. A significant difference in substrate acceptance and stereoselectivity was observed for bicyclo[3.3.0] and bicyclo[4.3.0] substrates. A plausible mechanism of these transformations was established by means of high level DFT/B3LYP calculations suggesting an essential difference in electronic requirements for a successful enzymatic conversion, which was similarly encountered in recombinant whole-cell mediated biooxidations. Some of the lactones produced in the biocatalytic Baeyer-Villiger oxidation represent key intermediates for the synthesis of indole alkaloids.     

Ab initio study of sodium intercalation into metal oxides

Using the full-potential linearized augmented plane wave (FP-LAPW) method, we have studied the effect of chemistry on the average intercalation voltage (AIV) caused by the Na ions intercalating into transition metal oxides. The effect of transition metal was systematically studied by varying M=Co, Ni and Mn in NaMO₂ and fixing the α-NaFeO₂ layered structure. The effect of the guest atoms into the host material is discussed in terms of the structural and electronic properties. Comparatively to Li intercalation, a significant electron transfer towards transition metal was found. This observation suggests that the transition metal contribute to the AIV determination and confirms the common assumption that intercalated electron reduces M⁴⁺ to M³⁺.     

Molecular modeling study on surface,thermal, mechanical and gas diffusion properties of chitosan

The motivation of this work is to provide reliable and accurate modeling studies of the physical (surface, thermal, mechanical and gas diffusion) properties of chitosan (CS) polymer. Our computational efforts have been devoted to make a comparison of the structural bulk properties of CS with similar type of polymers such as chitin and cellulose through cohesive energy density, solubility parameter, hydrogen bonding, and free volume distribution calculations. Atomistic modeling on CS polymer using molecular mechanics (MM) and molecular dynamics (MD) simulations has been carried out in three dimensionally periodic and effective two dimensionally periodic condensed phases. From the equilibrated structures, surface energies were computed. The equilibrium structure of the films shows an interior region of mass density close to the value in the bulk state. Various components of energetic interactions have been examined in detail to acquire a better insight into the interactions between bulk structure and the film surface. MD simulation (NPT ensemble) has also been used to obtain polymer specific volume as a function of temperature. It is demonstrated that these V–T curves can be used to locate the volumetric glass transition temperature (T_g) reliably. The mechanical properties of CS have been obtained using the strain deformation method. Diffusion coefficients of O₂, N₂, and CO₂ gas molecules at 300 K in CS have been estimated. The calculated properties of CS are comparable with the experimental values reported in the literature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1260–1270, 2007     

Influence of temperature on phosphorescence spectra of Pd-porphine in Shpol’skii matrices

We have studied the temperature dependence of the radiative deactivation of the Pd-porphine triplet states in Shpol’skii matrices in the temperature range 1.2–210 K. A substantial transformation of the phosphorescence spectra is observed as the temperature increases and is due to the inclusion of thermally activated Pd-porphine states in the radiative deactivation processes. The activation energy E_a of these Pd-porphine states is measured in matrices of n-octane and n-nonane. The splitting of the lowest quasidegenerate triplet state ΔE(T₂−T₁) is determined for planar and distorted conformations of the Pd-porphine macrocycle in the n-octane matrix as 40 and 57 cm⁻¹, respectively. The ability to use the temperature dependence of the phosphorescence properties of Pd-porphine to fabricate molecular thermometers for the low-temperature range is analyzed. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 4, pp. 460–464, July–August, 2007.