Application of a dynamic method of minimisation in the study of reaction surfaces

This paper describes the application of Snyman's dynamic minimisation method to a fitted potential surface of H₃. Comparisons are made with conventional algorithms. A method is described to extend Snyman's method so that it will find only a particular kind of stationary point. It is emphasized that this method enables saddle points to be found without having to resort to approaches based on trial and error.     

Übergangsmetall-substituierte Acylphosphane und Phosphaalkene. 17 [1] Synthese und Struktur der μ-Isophosphaalkin-Komplexe [(η5-C5H5)2(CO)2Fe2(μ-CO)(μ-CPC6H2R3-2,4,6)] (R = Me,iPr, tBu)

Transition Metal Substituted Acylphosphanes and Phosphaalkenes. 17. Synthesis and Structure of the μ-Isophosphaalkyne Complexes [(η⁵-C₅H₅)₂(CO)₂Fe₂(μ-CO)(μ-C?PC₆H₂R₃)] (R = Me, iPr, tBu) . Condensation of (η⁵-C₅H₅)₂(CO)₂Fe₂(μ-CO)(μ-CSMe)}⁺SO₃CF₃^? ( 6 ) with 2,4,6-R₃C₆H₂PH(SiMe₃) ( 7 ) ( a : R = Me, b : R = iPr, c : R = tBu) affords the complexes (η⁵-C₅H₅)₂(CO)₂Fe₂(μ-CO)(η-C?PC₆H₂R₃-2,4,6) ( 9 a–c ) with edge-bridging isophosphaalkyne ligands as confirmed by the x-ray structure analysis of 9 a .     

H-, C-NMR and ethylene polymerization studies of zirconocene/MAO catalysts: effect of the ligand structure on the formation of active intermediates and polymerization kinetics

Using ¹H- and ¹³C-NMR spectroscopies, cationic intermediates formed by activation of L₂ZrCl₂ with methylaluminoxane (MAO) in toluene were monitored at Al/Zr ratios from 50 to 1000 (L₂ are various cyclopentadienyl (Cp), indenyl (Ind) and fluorenyl (Flu) ligands). The following catalysts were studied: (Cp-R)₂ZrCl₂ (R=Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, Me₅, n-Bu, t-Bu), rac-ethanediyl(Ind)₂ZrCl₂, rac-Me₂Si(Ind)₂ZrCl₂, rac-Me₂Si(1-Ind-2-Me)₂ZrCl₂, rac-ethanediyl(1-Ind-4,5,6,7-H₄)₂ZrCl₂, (Ind-2-Me)₂ZrCl₂, Me₂C(Cp)(Flu)ZrCl₂, Me₂C(Cp-3-Me)(Flu)ZrCl₂ and Me₂Si(Flu)₂ZrCl₂. Correlations between spectroscopic and ethene polymerization data for catalysts (Cp-R)₂ZrCl₂/MAO (R=H, Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, Me₅, n-Bu, t-Bu) and rac-Me₂Si(Ind)₂ZrCl₂ were established. The catalysts (Cp-R)₂ZrCl₂/AlMe₃/CPh₃⁺B(C₆F₅)₄⁻ (R=Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, n-Bu, t-Bu) were also studied for comparison of spectroscopic and polymerization data with MAO-based systems. Complexes of type (Cp-R)₂ZrMe⁺←Me⁻-Al≡MAO (IV) with different [Me-MAO]⁻ counteranions have been identified in the (Cp-R)₂ZrCl₂/MAO (R=n-Bu, t-Bu) systems at low Al/Zr ratios (50-200). At Al/Zr ratios of 500-1000, the complex [L₂Zr(μ-Me)₂AlMe₂]⁺[Me-MAO]⁻ (III) dominates in all MAO-based reaction systems studied. Ethene polymerization activity strongly depends on the Al/Zr ratio (Al/Zr=200-1000) for the systems (Cp-R)₂ZrCl₂/MAO (R=H, Me, n-Bu, t-Bu), while it is virtually constant in the same range of Al/Zr ratios for the catalytic systems (Cp-R)₂ZrCl₂/MAO (R=1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄) and rac-Me₂Si(Ind)₂ZrCl₂/MAO. The data obtained are interpreted on assumption that complex III is the main precursor of the active centers of polymerization in MAO-based systems.     

Transition Metals in the Synthesis and Functionalization of Indoles [New Synthesis Methods (72)]

The use of transition-metal complexes as reagents for the synthesis of complex organic compounds has been under development for at least several decades, and many extraordinary organic transformations of profound potential have been realized. However, adoption of this chemistry by the practicing synthetic organic chemist has been inordinately slow, and only now are transition-metal reagents beginning to achieve their rightful place in the arsenal of organic synthesis. Several factors contributed to the initial reluctance of synthetic organic chemists to use organometallic reagents. Lacking education and experience in the ways of elements having d electrons, synthetic chemists viewed organometallic processes as something mysterious and unpredictable, and not to be discussed in polite society. Organometallic chemists did not help matters by advertising their latest advances as useful synthetic methodology, but restricting their studies to very simple organic systems lacking any serious functionality (e.g., the “methyl, ethyl, butyl, futile” syndrome). Happily, things have changed. Organometallic chemists have turned their attention to more complex systems, and more recently trained organic chemists have benefited from exposure to the application of transition metals. This combination has set the stage for major advances in the use of transition metals in the synthesis of complex organic compounds. This review deals with one aspect of this area, the use of transition metals in the synthesis of indoles.     

Metal-free synthesis of 2-mercaptobenzothiazoles and 6-(4-substituted-1H-1,2,3-triazol-1-yl)-2-mercaptobenzothiazoles via microwave-assisted synthesis pathway

Abstract

A simple, efficient, and metal-free methodology for the preparation of 2-mercaptobenzothiazole and derivatives in excellent yields via microwave-assisted pathway is reported. Our condition provides a convenient protocol for the synthesis of a diverse collection of 2-mercaptobenzothiazoles and 6-(4-substituted-1H-1,2,3-triazol-1-yl)-2-mercaptobenzothiazoles with a very simple purification process. This report provides an alternative protocol for fast access to the wide range of compounds for sequence synthesis and biological studies.     

New tetradentate Schiff-base polymers: preparation of poly[2,5-(didodecyloxy)phenylene-1,4-diyl-alt-N,N-(o-phenylene)-bis(salicylideneiminato-4,4-diyl)] and poly[2,5-(didodecyloxy)phenylene-1,4-diyl-alt-N,N-(alkylidene)-bis(salicylideneiminato-4,4-diyl)]s

New tetradentate Schiff-base polymers, in which phenylene units alternate with salicylideneiminato units, have been prepared by condensation of 2,5-(didodecyloxy)-1,4-bis(3-formyl-4-hydroxyphenyl)benzene (DFHB) with appropriate diamines in a mixed solution of CHCl₃/toluene/acetic acid with 31-79% yields. DFHB as the key building block was prepared by the Suzuki reaction of 2,5-(didodecyloxy)benzene-1,4-diboronic acid with 5-bromosalicylaldehyde in a two-phase solution of tetrahydrofuran/water in the presence of NaHCO₃/Pd(PPh₃)₄ in 45% yield. The molecular structures of the prepared compounds were identified by spectroscopy. Their absorption spectroscopic profiles have been analyzed.     

Mixed valency in the high-temperature phases of transition metal molybdates, A MoO4 ( A =Fe, Co, Ni)

Transition metal molybdates of the formulaAMoO₄ whereA=Fe, Co or Ni exhibit a first-order phase transition between 670K–970K. An investigation of the lowtemperature (lt) and high-temperature (ht) phases by x-ray photoelectron spectroscopy, x-ray absorption spectroscopy, magnetic susceptibility and other physical methods shows that the phase transition is associated with a valence change of the typeA ²⁺+Mo⁶⁺αA ³⁺+Mo⁵⁺ in the cases of iron and cobalt molybdates. Contribution No. 311 from the Solid State and Structural Chemistry Unit.     

Carbon Dioxide as an Alternative C1 Synthetic Unit: Activation by Transition-Metal Complexes

The carbon dioxide molecule has been of limited importance as a synthetic unit in organic chemistry. When it is coordinated to transition metals, however, completely new possibilities arise; CO₂ can bond to metal complexes in a variety of ways and can enter into insertion and coupling reactions, or become catalytically attached to other substrates. The formation of C? C bonds between carbon dioxide and unsaturated hydrocarbons under conditions of homogeneous catalysis makes available new synthetic routes to industrially interesting organic compounds.     

Sandwich-type transition metal complexes [(CBO)n]2M with carbon boronyl ligands (CBO)n (n=4–6)

A density functional theory investigation on a series of sandwich-type transition metal complexes [(CBO)_n]₂M (n=4–6; M=transition metals) with carbon boronyls (CBO)_n as effective aromatic ligands has been presented in this work at B3LYP level. The ground-states of these complexes possess staggered D_nd symmetries, while the corresponding eclipsed D_nh structures exist as transition states with slightly higher energies (within 5.8 kJ/mol). Carbon boronyl complexes [(CBO)_n]₂M are confirmed to be much more stable than their boron carbonyl isomers [(BCO)_n]₂M, which, on the other hand, take eclipsed ground-states with D_nh symmetries. The carbon boronyl complexes [(BCO)_n]₂M proposed in this work parallelize the well-known sandwich-type hydrocarbon complexes [C_nH_n]₂M in coordination chemistry with boronyl groups –BO isolobal to –H atoms in corresponding ligands.     

EXAFS Spectroscopy of the Alkoxide Precursor Zr(O n Bu)4 and its Modification in Solution

Summary. The molecular structure of the transition metal alkoxide Zr(OⁿBu)₄ in toluene and its modification by addition of i-propanol, tetrahydrofurane, and the coordinating ligand pentane-1,3-dione (Hacac) were investigated by extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES) spectroscopy. Zr(OⁿBu)₄ dissolved in toluene forms dimers. It was proved that cluster size is a function of the number of added equivalents ligand. In contrast, the addition of i-propanol or tetrahydrofurane caused no structural changes observable by EXAFS spectroscopy. A detailed discussion of the structural models is given in terms of possible alternatives and errors within the EXAFS analysis.