Two-dimensional transient dynamic response of orthotropic layered media

In this study, two-dimensional transient dynamic response of orthotropic plane layered media is investigated. The plane multilayered media consist of N different generally orthotropic, homogeneous and linearly elastic layers with different ply angles. In the generally orthotropic layer, representing a ply reinforced by unidirectional fibers with an arbitrary orientation angle, the principal material directions do not coincide with body coordinate axes. The solution is obtained by employing a numerical technique which combines the use of Fourier transform with the method of characteristics. The numerical results are displayed in curves denoting the variations of stress and displacement components with time at different locations. These curves clearly reveal, in wave profiles, the scattering effects caused by the reflections and refractions of waves at the boundaries and at the interfaces of the layers, and also the effects of anisotropy caused by fiber orientation angle. The curves properly predict the sharp variations in the response at the neighborhood of the wave fronts, which shows the power of the numerical technique employed in the study. By suitably adjusting the elastic constants, the results for multilayered media with transversely isotropic layers, or layers with cubic symmetry, or isotropic layers can easily be obtained from the general formulation. Furthermore, solutions for some special cases, including Lamb’s problem for an elastic half-space, are obtained and compared with the available solutions in the literature and very good agreement is found. Preliminary version presented at the Second International Congress on Mechatronics (MECH2K3), Graz, Austria, July 14-17, 2003.     

The role of transient rheology in polymeric sintering

The initial theory of Frenkel and Eshelby for the coalescence of drops in air (or sintering) of Newtonian fluids, which equated the work of surface tension to the work done by viscous stresses while assuming biaxial extensional flow kinematics, was extended to the case of time-dependent material functions using the Upper Convected Maxwell (UCM) model. A numerical scheme was developed to solve the ordinary differential equations (ODE) for the stresses, which are embedded in the ODE based on the mechanical energy balance. Initial conditions required to solve the set of non-linear ODEs were obtained from visualization experiments of the coalescing drops as the theory for elastic contact gave unrealistically high values of the initial neck radius. The transient model predicted that coalescence was accelerated by increasing the relaxation time, the opposite relationship of what was predicted by the steady-state UCM formulation, and was capable of quantitatively predicting the experimental coalescence rates at times when viscoelasticity was important.     

Experimental investigation of natural convection in a vertical rib-roughened channel with asymmetric heating

An experimental study in an open-ended vertical channel is carried out in order to describe the fluid dynamics and heat transfer of transient free convection inside a vertical rib-roughened channel asymmetrically heated at various uniform heat fluxes (650, 700, and 780 W/m²) corresponding to various modified Rayleigh numbers (3.65 × 10⁶, 3.93 × 10⁶ and 4.4 × 10⁶). Two ribs are symmetrically located on each wall. The investigations focused more specifically on the influence of the ribs positions inside the channel and the modified Rayleigh number (Ra^*) both in steady-state regime and during the transitional phase occurring just after the start of the heating on the flow structure and the heat transfer performance. The results showed the appearance of large-scale flow instabilities which will develop and propagate until the development of the pocket-like vortex (reversed flow). Also, the formation and breakup of recirculation eddies, vortex banishment, besides that a separation and shifting of the boundary layer from one wall to another are identified. The best position of the ribs for heat extraction depends on the magnitude of the Rayleigh number. In that case, the top position is the optimal position for the small and the moderate modified Rayleigh numbers.     

Mechanism of interaction of pressure waves at a discrete partial blockage

This paper analyses the mechanism of interaction between an incident pressure wave and blockages of different geometrical characteristics (i.e., a butterfly and a ball valves, two short stretches of pipe with a reduced diameter, and a device simulating a longitudinal body blockage) by means of laboratory and numerical tests. Experiments have shown that the mechanism of interaction with pressure waves is influenced by their path through the device: sinuous because of the device body for partially closed in-line valves (type I mechanism), and straight for the small bore pipe devices (type II mechanism). Type I mechanism is characterized by a rise followed by an almost constant value whereas in type II one a drop occurs after the rise. To complete the investigation the effect of the pre-transient condition is discussed.     

Transient flows of a second grade fluid

Exact analytical solutions for a class of unsteady unidirectional flows of an incompressible second-order fluid are constructed. The flows are generated impulsively from rest by motion of a plate or two plates or by sudden application of a pressure gradient. Expressions for velocity, flux and skin friction are obtained for both large and small times. It is found that large and small times solutions are dependent on the coefficient of viscoelasticity. The solutions corresponding to Newtonian fluids can be easily obtained from those for fluids of second order by letting the viscoelastic parameter to be zero.     

A Constitutive Model in Finite Viscoelasticity of Particle-reinforced Rubbers

Two series of tensile relaxation tests are performed on natural rubber filled with high abrasion furnace black. To fit observations, constitutive equations are derived for the nonlinear viscoelastic behavior of a particle-reinforced elastomer. A filled rubber is modeled as a composite medium, where inclusions with low concentrations of junctions are randomly distributed in the host matrix. The inclusions are treated as equivalent networks of macromolecules, where strands can separate from temporary junctions as they are thermally agitated. The bulk medium is thought of as a permanent network of chains. Unlike conventional concepts of transient networks, the concentration of strands in inclusions is assumed to be affected by mechanical factors: under active loading, inter-chain interactions weaken and some strands that were prevented from detachment from their junctions in a stress-free compound become free to separate from the junctions in a deformed medium. Unloading strengthens interactions between macromolecules, which results in an increase in the number of permanent strands. By using the laws of thermodynamics, stress–strain relations for a particle-reinforced rubber are developed. Adjustable parameters in the constitutive equations are found by fitting the experimental data. It is demonstrated that mechanical pre-loading and annealing of specimens at an elevated temperature noticeably affect concentrations of inclusions with various activation energies for rearrangement of strands.     

The unsteady flow generated by an oscillating wall with transpiration

In this work, an analytical solution for the fluid behavior over flat plates with impulsive and oscillating motions, starting from rest, and with wall transpiration, is presented. The classical solution of this problem is given by Panton [7] and is found to be an especial case of the solution here presented. The analytical solution is obtained without the use of any special transformations, such as Laplace or Fourier transforms. Instead, an extension of the variable separation technique is used together with similarity arguments. A non-dimensional number—the transpiration rate—is used to take into account the injection or suction of fluid at the wall. This parameter is shown to be of great influence on the proposed velocity solution.     

Acoustic, thermal and flow processes in a water filled nanoporous glass by time-resolved optical spectroscopy

We present heterodyne detected transient grating measurements on water filled Vycor 7930 in the range of temperature 20-90 °C. This experimental investigation enables to measure the acoustic propagation, the average density variation due to the liquid flow and the thermal diffusion in this water filled nano-porous material. The data have been analyzed with the model of Pecker and Deresiewicz which is an extension of Biot model to account for the thermal effects. In the whole temperature range the data are qualitatively described by this hydrodynamic model that enables a meaningful insight of the different dynamic phenomena. The data analysis proves that the signal in the intermediate and long time-scale can be mainly addressed to the water dynamics inside the pores. We proved the existence of a peculiar interplay between the mass and the heat transport that produces a flow and back-flow process inside the nano-pores. During this process the solid and liquid dynamics have opposite phase as predicted by the Biot theory for the slow diffusive wave. Nevertheless, our experimental results confirm that transport of elastic energy (i.e. acoustic propagation), heat (i.e. thermal diffusion) and mass (i.e. liquid flow) in a liquid filled porous glass can be described according to hydrodynamic laws in spite of nanometric dimension of the pores. The data fitting, based on the hydrodynamic model, enables the extraction of several parameters of the water-Vycor system, even if some discrepancies appear when they are compared with values reported in the literature.     

Shock tunnel flow visualization using planar laser-induced fluorescence imaging of NO and OH

Temporal sequences of planar laser-induced fluorescence (PLIF) images of several high-speed, transient flowfields created in a reflection-type shock tunnel facility were acquired. In each case, the test gas contained either nitric oxide or the hydroxyl radical, the fluorescent species. The processes of shock reflection from an endwall with a converging nozzle and of underexpanded free jet formation were examined. A comparison was also made between PLIF imaging and shadow photography. The investigation demonstrated some of the capabilities of PLIF imaging diagnostics in complex, transient, hypersonic flowfields, including those with combustion.Nomenclature A spontaneous emission rate - A _las cross sectional area of laser sheet - B laser absorption rate - C _opt constant dependent on optical arrangement, collection efficiency, etc. - D nozzle throat diameter - E _p laser pulse energy - f _J Boltzmann fraction of absorbing state - g spectral convolution of laser and absorption lineshapes - k Boltzmann constant - M _s incident shock Mach number - N noise, root-mean-square signal fluctuation - P static pressure - P ₁ initial pressure of test gas in shock tube - P _a free jet ambient pressure - P _s stagnation pressure - Q electronic quenching rate of excited state - S PLIF signal - t time between shock reflection and image acquisition - T static temperature - T _s stagnation temperature - _a mole fraction of absorbing species     

Transient simulation of a pump-turbine with misaligned guide vanes during turbine model start-up

Experimental studies of a model pump-turbine S-curve characteristics and its improvement by misaligned guide vanes （MGV） were extended to prototype pump turbine through 3-D transient flow simulations. The unsteady Reynolds-averaged Navier-Stokes equations with the SST turbulence model were used to model the transient flow within the entire flow passage of a reversible pump-turbine with and without misaligned guide vanes during turbine model start-up. The unstable S-curve and its improvement by using misaligned guide vane were verified by model test and simulation. The transient flow calculations were used to clarify the variations of pressure pulse and internal flow behavior in the entire flow passage. The use of misaligned guide vanes can eliminate the S-curve characteristics of a pump-turbine, and can significantly increase the pressure pulse amplitude in the entire flow passage and the runner radial forces during start-up. The MGV only decreased the pulse amplitude on the guide vane suction side when the rotating speed was less than 50% rated speed. The hydraulic reason is that the MGV dramatically changed the flow patterns inside the entire flow passage, and destroyed the symmetry of the flow distribution inside the guide vane and runner.