Transient Characteristics of the Yield Surface of Electrorheological Clutch

The characteristic of transient yield surface in electrorheological clutch has been studied. It shows that the characteristics of clutch are dependent on the parameterβ, which is in the yield stress formula of ERF, when extra electric field was applied suddenly. In the case ofβ>2, the yield surface generates from the inner cylinder. In the case ofβ<2, the yield surface generates from the outer cylinder. The direct numerical results deriving from the Crank-Nicoson finite difference method with the regulation parameter model are also presented.     

Reverse permeation of sodium ions driven by pH difference across a liquid membrane: time dependencies of membrane resistance and membrane potential in a reverse permeation system

The diffusional flux of sodium ions across a liquid membrane was observed as a reverse permeation phenomenon: sodium ions were transported across the membrane against their own concentration difference. A supported liquid membrane having stearic acid as an ionic carrier was used. The internal aqueous phase contained NaCl and HCl and the external aqueous phase contained NaOH of the same initial concentration as NaCl in the internal aqueous phase. The reverse permeation occurred with a long time delay. During the delay, sodium ions flowed from the acidic to alkaline solution. The diffusion coefficient of sodium ion estimated from the flux equation taking into account the Donnan equilibrium at the interface was found to be much greater than that in the membrane solvent, 1-octanol. In the same membrane system as for the flux measurement, the membrane conductance and the membrane potential were measured as a function of time. The time dependence of the membrane potential in the presteady state showed a biphasic behavior. The initial rapid phase could be attributed to the change in the phase boundary potential and the subsequent slow step to the change in the diffusion potential within the membrane. Before the steady membrane potential had been reached, the reverse permeation of sodium ions against their own concentration difference was not observed. During the slow relaxation process of the membrane potential, the membrane resistance decreased to approach the steady state. Moreover, the oscillation of membrane potential abruptly started at a time in the slow step of the potential change and continued during the steady state. It was suggested that, at the presteady state, the increase in the amount of water in the membrane would drive a drastic change in the state of the liquid membrane in the filter pore, e.g. an inverted micellar structure making.     

Chromatographic impulse response technique with curve fitting to measure binary diffusion coefficients and retention factors using polymer-coated capillary columns

The theoretical basis of a Gaussian-like approximate solution was applied to a chromatographic impulse response technique with curve fitting for measuring binary diffusion coefficients and retention factors using a polymer-coated capillary column. The formulae were derived for evaluating both the accuracy of the approximate solution and the sensitivity of the parameters. The validity of the solution also was confirmed experimentally for pulse injection of phenol in acetone into supercritical carbon dioxide flowing at 313.15 K and 11.6-28.6 MPa. Potential sources for experimental errors of the method are discussed.     

High-sensitive analysis of DNA fragments by capillary gel electrophoresis using transient isotachophoresis preconcentration and fluorescence detection

In this report aimed on further development of a high-sensitivity capillary gel electrophoresis (CGE) method for analysis of DNA fragments, we firstly explored online transient isotachophoresis (tITP) preconcentration combined with fluorescence detection (FD). The fluorescence signal (excitation: 488 nm; emission: 590 nm) was generated using the intercalating dye of ethidium bromide (EB). It was found when the leading electrolyte (LE) was injected behind the sample zone, such a special tITP mode has significant advantages to solve the bubble formation issue and to improve the analytical performance stability. Two standard DNA samples, a 50 bp DNA step ladder and the φX174/HaeIII digest, were used to evaluate the qualitative and quantitative abilities of the tITP-FD approach. A highly diluted sample (10,000-fold in the water, e.g. the φX174/HaeIII digest diluted from 500 μg/ml to the 50 ng/ml level) was enriched and detected; the LOD was down to 0.09 ng/ml for the 72 bp fragment, apparently improved more than 1000-fold in comparison with UV detection. Although the RSD of peak areas (n = 3) was around 15.5% for the sample was electrokinetically injected, good linearity of peak area response showed that the proposed method is suitable for quantitative analysis.     

Transient absorption measurement system using pulsed energetic ion

This article reports a highly sensitive transient absorbance measurement system using pulsed energetic ions. The ions were pulsed by a beam chopper, which was synchronized with the cyclotron, and accelerated to the desired energy around 18 MeV/u. H, He, C and Ne ions can be used for the transient absorption measurement. The optical system can measure an absorbance smaller than 1.0×10⁻⁴ in the wavelength range of 400–740 nm.     

Local Thermodynamic Equilibrium in Laser-Induced Breakdown Spectroscopy: Beyond the McWhirter criterion

In the Laser-Induced Breakdown Spectroscopy (LIBS) technique, the existence of Local Thermodynamic Equilibrium (LTE) is the essential requisite for meaningful application of theoretical Boltzmann–Maxwell and Saha–Eggert expressions that relate fundamental plasma parameters and concentration of analyte species. The most popular criterion reported in the literature dealing with plasma diagnostics, and usually invoked as a proof of the existence of LTE in the plasma, is the McWhirter criterion [R.W.P. McWhirter, in: Eds. R.H. Huddlestone, S.L. Leonard, Plasma Diagnostic Techniques, Academic Press, New York, 1965, pp. 201–264]. However, as pointed out in several papers, this criterion is known to be a necessary but not a sufficient condition to insure LTE. The considerations reported here are meant to briefly review the theoretical analysis underlying the concept of thermodynamic equilibrium and the derivation of the McWhirter criterion, and to critically discuss its application to a transient and non-homogeneous plasma, like that created by a laser pulse on solid targets. Specific examples are given of theoretical expressions involving relaxation times and diffusion coefficients, as well as a discussion of different experimental approaches involving space and time-resolved measurements that could be used to complement a positive result of the calculation of the minimum electron number density required for LTE using the McWhirter formula. It is argued that these approaches will allow a more complete assessment of the existence of LTE and therefore permit a better quantitative result. It is suggested that the mere use of the McWhirter criterion to assess the existence of LTE in laser-induced plasmas should be discontinued.     

脉冲电势调制型电化学气体传感器

根据暂态电化学原理 ,使用微电极并融合计算机控制的快速电势调制技术和数据采集、处理功能 ,提出并建立了一类全新的集信号提取、处理与结果显示等功能于一体的“脉冲电势调制型气体传感器” .在优化传感器性能及其新的功能开发和集成方面取得了重要进展 ,是一类为常规电化学气体传感器无法比拟而有发展前景的暂态电化学多组份气体传感器 .