Shear and extensional rheology of entangled polymer melts: Similarities and differences

This work extends our previous understanding concerning the nonlinear responses of entangled polymer solutions and melts to large external deformation in both simple shear and uniaxial extension. Many similarities have recently been identified for both step strain and startup continuous deformation, including elastic yielding, i.e., chain disentanglement after cessation of shear or extension, and emergence of a yield point during startup deformation that involves a deformation rate in excess of the dominant molecular relaxation rate. At a sufficiently high constant Hencky rate, uniaxial extension of an entangled melt is known to produce window-glass-like rupture. The present study provides evidence against the speculation that chain entanglements tie up into "dead knots" in constant-rate extension because of the exponentially growing chain stretching with time. In particular, it is shown that even Instron-style tensile stretching, i.e., extending a specimen by applying a constant velocity on both ends, results in rupture. Yet, in the same rate range, the same entangled melt only yields in simple shear, and the resulting shear banding is clearly not a characteristic of rupture. Thus, we conclude that chain entanglements respond to simple shear in the manner of yielding whereas uniaxial extension is rather effective in causing some entanglements to lock up, making it impossible for the entanglement network to yield at high rates.     

Exact solution of functionally graded thick cylinder with finite length under longitudinally non-uniform pressure

Elastic analysis of a functionally graded thick-walled cylindrical pressure vessel is analytically studied in the present research. Gradation is considered for all mechanical properties along the thickness direction based on a power function. The constitutive relations are developed in the general cylindrical coordinate system for an axisymmetric pressurized cylinder. For simulation of these two deformation components, first order shear deformation theory is considered. The FG cylinder is subjected to longitudinally non-uniform pressure along the length of the cylinder. The present problem is applicable for simulation of non-uniform pressurized cylinder by fluids or gases.     

Toward a generalized computational workflow for exploiting transient pockets as new targets for small molecule stabilizers: Application to the homogentisate 1,2-dioxygenase mutants at the base of rare disease Alkaptonuria

Alkaptonuria (AKU) is an inborn error of metabolism where mutation of homogentisate 1,2-dioxygenase (HGD) gene leads to a deleterious or misfolded product with subsequent loss of enzymatic degradation of homogentisic acid (HGA) whose accumulation in tissues causes ochronosis and degeneration. There is no licensed therapy for AKU. Many missense mutations have been individuated as responsible for quaternary structure disruption of the native hexameric HGD. A new approach to the treatment of AKU is here proposed aiming to totally or partially rescue enzyme activity by targeting of HGD with pharmacological chaperones, i.e. small molecules helping structural stability. Co-factor pockets from oligomeric proteins have already been successfully exploited as targets for such a strategy, but no similar sites are present at HGD surface; hence, transient pockets are here proposed as a target for pharmacological chaperones. Transient pockets are detected along the molecular dynamics trajectory of the protein and filtered down to a set of suitable sites for structural stabilization by mean of biochemical and pharmacological criteria. The result is a computational workflow relevant to other inborn errors of metabolism requiring rescue of oligomeric, misfolded enzymes.     

Ffast Transient Fluorescence Technique to Study Critical Exponents at the Glass Transition

The fast transient fluorescence (FTRF) technique was used to study critical exponents at the glass transition in free-radical crosslinking copolymerization (FCC) for two different monomeric systems, methyl methacrylate (MMA) and styrene (S). Pyrene (P_y ) was used as a fluorescence probe. The fluorescence lifetimes of P_y from its decay traces were measured and used to monitor the gelation process. Changes in the viscosity of the pregel solutions due to glass formation dramatically enhance the fluorescent yield of aromatic molecules. This effect is used to study the glass transition upon gelation of MMA and S monomeric systems as a function of time, at various temperatures and crosslinker concentrations. The results are interpreted in the view of percolation theory. The gel fraction and weight average degree of polymerization exponents β and γ are found to be 0.37 ± 0.02 and 1.66 ± 0.07 in agreement with percolation results.     

Performance of ring oscillators composed of gate-all-around FETs with varying numbers of nanowire channels using TCAD simulation

In this paper, we investigate the performance of ring oscillators composed of gate-all-around (GAA) silicon nanowire (NW) field-effect transistors (FETs) with four different numbers of NW channels, for sub-10-nm logic applications. Our simulations reveal that ring oscillators with double, triple, and quadruple NW channels exhibit improvements of up to 50%, 85%, and 97%, respectively, in the oscillation frequencies (f_osc), compared to a ring oscillator with a single NW channel, due to the large drive current, in spite of the increased intrinsic capacitance of a given device. Moreover, our work shows that the f_osc improvement ratio of the ring oscillators becomes saturated with triple NW channels with additional load capacitances of 0.1 fF and 0.01 fF, which are similar to, or less than the intrinsic device capacitance (∼0.1 fF). Thus, our study provides an insight for determining the capacitive load and optimal number of NW channels, for device development and circuit design of GAA NW FETs.     

Optical time-resolved study of the excitation dynamics*

Transient behaviour of the excited states originated from the neutral and the charged species is discussed using data from time-resolved experiments. Complex transient characteristics obtained for the slightly charged poly-(bithiophene) film during electrochemical doping were explained in terms of sequential molar fraction changes of the neutral species, the radical cation and the π-dimerized radical cations. Femtosecond transient absorption measurement carried out in time range of 0-4 ns for a two-photon excited dye reveals a multi-exponent decay with well separated relaxation times and the distinct relaxation mechanisms. At high irradiance and a sufficient fluence, the multi-photon excitation processes affect the subpicosecond response and lead to formation of the photo-products.     

Orientation-dependent deformation mechanisms of bcc niobium nanoparticles

Nanoparticles usually exhibit pronounced anisotropic properties, and a close insight into the atomic-scale deformation mechanisms is of great interest. In present study, atomic simulations are conducted to analyse the compression of bcc nanoparticles, and orientation-dependent features are addressed. It is revealed that surface morphology under indenter predominantly governs the initial elastic response. The loading curve follows the flat punch contact model in [1 1 0] compression, while it obeys the Hertzian contact model in [1 1 1] and [0 0 1] compressions. In plastic deformation regime, full dislocation gliding is dominated in [1 1 0] compression, while deformation twinning is prominent in [1 1 1] compression, and these two mechanisms coexist in [0 0 1] compression. Such deformation mechanisms are distinct from those in bulk crystals under nanoindentation and nanopillars under compression, and the major differences are also illuminated. Our results provide an atomic perspective on the mechanical behaviours of bcc nanoparticles and are helpful for the design of nanoparticle-based components and systems.     

Toward deformation densities for intramolecular interactions without radical reference states using the fragment,atom, localized,delocalized, and interatomic (FALDI) charge density decomposition scheme

A novel approach for calculating deformation densities is presented, which enables to calculate the deformation density resulting from a change between two chemical states, typically conformers, without the need for radical fragments. The Fragment, Atom, Localized, Delocalized, and Interatomic (FALDI) charge density decomposition scheme is introduced, which is applicable to static electron densities (FALDI‐ED), conformational deformation densities (FALDI‐DD) as well as orthodox fragment‐based deformation densities. The formation of an intramolecular NH⋅⋅⋅N interaction in protonated ethylene diamine is used as a case study where the FALDI‐based conformational deformation densities (with atomic or fragment resolution) are compared with an orthodox EDA‐based approach. Atomic and fragment deformation densities revealed in real‐space details that (i) pointed at the origin of density changes associated with the intramolecular H‐bond formation and (ii) fully support the IUPAC H‐bond representation. The FALDI scheme is equally applicable to intra‐ and intermolecular interactions. © 2017 Wiley Periodicals, Inc.     

Dynamic analysis on generalized linear elastic body subjected to large scale rigid rotations

The dynamic analysis of a generalized linear elastic body undergoing large rigid rotations is investigated. The generalized linear elastic body is described in kine-matics through translational and rot...