STABLE SOLUTION OF TIME DOMAIN INTEGRAL EQUATION METHODS USING QUADRATIC B-SPLINE TEMPORAL BASIS FUNCTIONS

This paper is concerned with stable solutions of time domain integral equation （TDIE） methods for transient scattering problems with 3D conducting objects. We use the quadratic B-spline function as temporal basis functions, which permits both the induced currents and induced charges to be properly approximated in terms of completeness. Because the B-spline function has the least support width among all polynomial basis functions of the same order, the resulting system matrices seem to be the sparsest. The TDIE formula-tions using induced electric polarizations as unknown function are adopted and justified. Numerical results demonstrate that the proposed approach is accurate and efficient, and no late-time instability is observed.     

瞬态荧光方法研究溶剂诱导的三苯胺衍生物的对称性破缺电荷转移动力学

在缺乏特征红外振动的情况下追踪具有四极或八极对称性分子的激发态对称性破缺电荷转移通常是很困难的.本文以一种具有八极对称性的三苯胺衍生物为研究对象,利用飞秒时间分辨瞬态荧光光谱方法获得发光跃迁偶极矩的演化动力学,进而实时表征了其溶剂诱导对称性破缺电荷转移的动力学过程.当该分子处于弱极性甲苯溶液中时,在激发态弛豫过程中其发射偶极矩变化较小;当处于较强极性的四氢呋喃溶液中时,其发射偶极矩在数皮秒内快速减小.在对比单体偶极分子的荧光动力学后,推断八极分子的发光态在强极性溶剂中经历溶剂诱导的结构变化,由激子耦合的八极对称性降低至激发定域的偶极对称性;而在较弱极性的溶剂中,其八极对称性在溶剂化稳定中得以较大程度的保持.     

人造地球卫星运动方程的代数动力学算法数值解

代数动力学算法首次被用于求人造地球卫星运动方程的数值解，在四阶算法下，与Runge-Kutta算法和辛算法的计算结果作了比较.结果表明，代数动力学算法对于人造地球卫星长期轨道的计算有较高的精度.并讨论了地球四极和八极带谐项对卫星轨道的影响. 关键词： 人造地球卫星运动方程 代数动力学算法数值解 地球四极和八极带谐项对卫星轨道的影响     

基于混合空穴注入层的湿法制备高效蓝光热激活延迟有机发光二极管

在溶液法制备有机电致发光器件(OLEDs)的研究中, PEDOT∶PSS由于具有较好的成膜性与高透光性而常被用作器件的空穴注入层。但相关研究表明, PEDOT∶PSS本身稳定性较差以及功函数较低,这使得溶液法制备OLEDs的性能差且不稳定。蓝色作为全彩色的三基色之一,制备高效的蓝光器件对于实现高质量显示器件和固态照明装置必不可少。而目前溶液法制备蓝光OLEDs的器件效率普遍较差,针对此问题,本文利用传统的蓝光热激活延迟荧光发光(TADF)材料DMAC-DPS作为发光层,用溶液法制备了蓝光TADF OLEDs,通过在PEDOT∶PSS中掺杂PSS-Na制备混合空穴注入层(mix-HIL)来提高空穴注入层的功函数,研究其对于蓝光TADF OLEDs器件性能的影响。首先在PEDOT∶PSS水溶液中掺入不同体积的PSS-Na溶液,在相同条件下旋涂制膜,进行器件制备。通过观测各个实验组器件的电致发光(EL)光谱,发现掺入PSS-Na后器件EL谱存在光谱蓝移的现象,这是由于掺入PSS-Na水溶液后, mix-HIL层的厚度有所降低,使得在微腔效应作用下, EL光谱发生蓝移。通过对比各组器件的电流密度-电压-亮度(J-V-L)曲线及其计算所得器件的电流效率,结果显示随着PSS-Na的掺入,器件的亮度和电流都有所增大,器件的电流效率也得到了提升,当掺杂比例为0.5∶0.5(PEDOT∶PSS/PSS-Na)时提升幅度最大(亮度提升86.7%,电流效率提升34.3%)。通过在瞬态电致发光测试过程中施加或撤去驱动电压观测了器件EL强度的变化,分析了在混合空穴注入层/发光层(mix-HIL/EML)界面处的电荷积累情况。实验证明,通过在PEDOT∶PSS中掺杂PSS-Na制备mix-HIL获得了蓝光TADF OLEDs器件性能的提升,这是一个获得高效率溶液法制备OLEDs的可行方法。     

ITER ���򳡴���֧��U �����Լк��ӷ����Ż�

利用试验及数值模拟技术研究了ITER 极向场磁体支撑U 型韧性夹的焊接变形规律,模拟和实际测量的比较验证了模拟的准确性,从而得到了U 型夹焊缝变形的基本规律,并改进现有夹具类型。基于验证好的热力边界条件以及优化的夹具,对三种焊接方案的U 型韧性夹的焊接变形进行了计算,从而提出了极向场磁体支撑制造的优化方案。优化后的焊接方案将焊接变形控制在0.6mm 以内。     

Uniaxial deformation and orientation of ethylene–tetrafluoroethylene films

This study concerns the thermal and mechanical response of several commercial grades of ethylene – tetrafluoroethylene copolymer films. Differential scanning calorimetry was used to show that, although films have similar degrees of crystallinity and melting temperature, the melting endotherms and crystallisation exotherms differ between materials, suggesting small changes in composition between manufacturers. Films were deformed in tension at a range of temperatures and rates. Selected films were unloaded immediately after stretching, and measurement of the elastic recovery highlighted further differences between materials. Batches of films were pre-drawn uniaxially above the glass transition and immediately quenched. When these materials were subsequently re-drawn below the glass transition temperature, most of them exhibited much improved yield stress, modulus and tensile strength (improving by factors of 5, 5 and 4, respectively at a draw ratio of 3), but a reduced strain to failure. In most of the films, the pre-drawing, as well as the initial orientation of the films, is accounted for by a simple shift in the true strain axis. This is indicative of a material response dominated by entropic network stretch. It also suggests that, in the cases where strain superposition does not work, a different arrangement of crystalline lamellae may be present, limiting the extent to which improved properties can be achieved in some materials.     

Influence of the surface morphology on the melting of polymer crystals. I. Loops of random length and adjacent reentry

A polymer crystal with a noncrystalline surface layer formed by chain loops of different lengths is considered. It is assumed that the length of each loop can be changed by longitudinal diffusion of the molecule through the crystal lattice. From the condition that the free energy of the system is minimum, the loop length distribution and the average loop length as function of temperature are calculated. In contrast to the results for loops of equal length, for the present model, a substantial thickness of the noncrystalline surface layer and a broad melting range is obtained also for the case of adjacent reentry. In order to get this result one has to take into account that even an “ideal fold” consists of at least four rigidly arranged CH2 groups in energetically unfavored conformation.     

A novel design of membrane mirror with small deformation and imaging performance analysis in infrared system

A method of diminishing the shape error of membrane mirror is proposed in this paper. The inner inflating pressure is considerably decreased by adopting the pre-shaped membrane. Small deformation of the membrane mirror with greatly reduced shape error is sequentially achieved. Primarily a finite element model of the above pre-shaped membrane is built on the basis of its mechanical properties. Then accurate shape data under different pressures can be acquired by iteratively calculating the node displacements of the model. Shape data are applicable to build up deformed reflecting surfaces for the simulative analysis in ZEMAX. Finally, ground-based imaging experiments of 4-bar targets and nature scene are conducted. Experiment results indicate that the MTF of the infrared system can reach to 0.3 at a high spatial resolution of 10l p/mm, and texture details of the nature scene are well-presented. The method can provide theoretical basis and technical support for the applications in lightweight optical components with ultra-large apertures.     

Shear and extensional rheology of entangled polymer melts: Similarities and differences

This work extends our previous understanding concerning the nonlinear responses of entangled polymer solutions and melts to large external deformation in both simple shear and uniaxial extension. Many similarities have recently been identified for both step strain and startup continuous deformation, including elastic yielding, i.e., chain disentanglement after cessation of shear or extension, and emergence of a yield point during startup deformation that involves a deformation rate in excess of the dominant molecular relaxation rate. At a sufficiently high constant Hencky rate, uniaxial extension of an entangled melt is known to produce window-glass-like rupture. The present study provides evidence against the speculation that chain entanglements tie up into "dead knots" in constant-rate extension because of the exponentially growing chain stretching with time. In particular, it is shown that even Instron-style tensile stretching, i.e., extending a specimen by applying a constant velocity on both ends, results in rupture. Yet, in the same rate range, the same entangled melt only yields in simple shear, and the resulting shear banding is clearly not a characteristic of rupture. Thus, we conclude that chain entanglements respond to simple shear in the manner of yielding whereas uniaxial extension is rather effective in causing some entanglements to lock up, making it impossible for the entanglement network to yield at high rates.     

Exact solution of functionally graded thick cylinder with finite length under longitudinally non-uniform pressure

Elastic analysis of a functionally graded thick-walled cylindrical pressure vessel is analytically studied in the present research. Gradation is considered for all mechanical properties along the thickness direction based on a power function. The constitutive relations are developed in the general cylindrical coordinate system for an axisymmetric pressurized cylinder. For simulation of these two deformation components, first order shear deformation theory is considered. The FG cylinder is subjected to longitudinally non-uniform pressure along the length of the cylinder. The present problem is applicable for simulation of non-uniform pressurized cylinder by fluids or gases.