Simultaneous speciation of mercury and butyltin compounds in natural waters and snow by propylation and species-specific isotope dilution mass spectrometry analysis

A robust method has been developed for simultaneous determination of mercury and butyltin compounds in aqueous samples. This method is capable of providing accurate results for analyte concentrations in the picogram per liter to nanogram per liter range. The simultaneous determination of the mercury and tin compounds is achieved by species-specific isotope dilution, derivatization, and gas chromatography–inductively coupled plasma mass spectrometer (GC–ICP–MS). In derivatization by ethylation and propylation, reaction conditions such as pH and the effect of chloride were carefully studied. Ethylation was found to be more sensitive to matrix effects, especially for mercury compounds. Propylation was thus the preferred derivatization method for simultaneous determination of organomercury and organotin compounds in environmental samples. The analytical method is highly accurate and precise, with RSD values of 1 and 3% for analyte concentrations in the picogram per liter to nanogram per liter range. By use of cleaning procedures and SIDMS blank measurements, detection limits in the range 10–60 pg L^–1 were achieved; these are suitable for determination of background levels of these contaminants in environmental samples. This was demonstrated by using the method for analysis of real snow and seawater samples. This work illustrates the great advantage of species-specific isotope dilution for the validation of an analytical speciation method—the possibility of overcoming species transformations and non-quantitative recovery. Analysis time is saved by use of the simultaneous method, because of the use of a single sample-preparation procedure and one analysis.     

植物样品中单宁的微波溶出快速测定法研究

研究了利用微波代替一般的沸水浴处理试样的方法。对不同植物样品中单宁的浸提测定，与常规方法做了对照，并讨论了微波功率、时间、酸度等因素对测定结果的影响。研究表明，此法可大大地缩短测定时间，提高测定效率，节省人力、物力，不污染环境，便于大批量样品的测定，相对标准偏差≤１．４％，测定结果较为满意。为植物样品中单宁的测定，提供了一个快速、简便、准确的分析方法，并可借鉴于其它样品的测定。     

Spectrophotometric determination of lead in vegetables with dibromo-p-methyl-carboxysulfonazo

A new highly sensitive and selective chromogenic reagent dibromo-p-methyl-carboxysulfonazo (DBMCSA) was synthesized and studied for the spectrophotometric determination of lead in detail. In 0.25 M phosphoric acid medium, which greatly increases the selectivity, lead reacts with DBMCSA to form a 1:2 blue complex, having a sensitive absorption peak at 648 nm. Under the optimal conditions, Beer's law is obeyed over the range from 0 to 0.8 μg ml⁻¹ Pb(II) and the apparent molar absorptivity is 1.04×10⁵ l mol⁻¹ cm⁻¹. The detection limit and the variation coefficient were found to be 2.14 ng ml⁻¹ and 1.0%, respectively. It is found that, except for Ca(II) and Ba(II), all foreign ions studied do not interfere with determination. The interference caused by Ca(II) and Ba(II) can be easily eliminated by prior extraction with potassium iodide-methylisobutylketone. The method has been applied to the determination of lead in vegetables with satisfactory results.     

Determination of trace elements in biological materials using tetramethylammonium hydroxide for sample preparation

A method to prepare milk powder, bovine liver and bovine muscle samples for analysis by electrothermal atomic absorption spectrometry (ETAAS) is proposed. Samples are mixed with a small amount of tetramethylammonium hydroxide (TMAH) and a stable and homogeneous slurry is produced in ca. 2 h with heating at 60–70 °C. After such sample preparation and dilution with water, trace elements are determined in certified reference materials. Pyrolysis and atomisation temperatures are optimised for each element, and several modifiers are investigated. External calibration is used for every analyte. Limits of detection (LODs), precision and accuracy are reported for Cd, Pb, Ni, Cr, Cu and Ag and compared with those obtained after conventional acid digestion. The main advantages of the proposed method are the simplicity of sample preparation and the longer lifetime of the graphite tube.     

壳聚糖对鞣酸絮凝作用的研究

以壳聚糖为絮凝剂，采用絮凝法除去中药药液中的杂质。以鞣酸为研究对象，从鞣酸浓度，体系温度，ＰＨ絮凝剂用量粘均分子量等方面探讨其絮凝规律，用正交试验优化其絮凝条件，为实施中药药液的絮凝法精制工艺提供参考。     

Square-wave voltammetric determination of cefoperazone in a bacterial culture,pharmaceutical drug,milk, and urine

Use of square-wave voltammetry (SWV) for determination of cefoperazone (CFPZ) in some buffers, bacterial culture, urine, and milk is described. CFPZ provides a specific voltammetric signal which is affected by pH and solution components. Determination of CFPZ in Britton–Robinson buffer, pH 4.4, is sensitive with a low detection limit (about 0.5 nmol L^–1). In a more complex medium (bacterial 2YT medium, pH 7.2) the detection limit was approximately 1.5 mol L^–1. We provide evidence that SWV is a suitable and quick method for CFPZ determination in a culture of living bacteria without separation of biomass. We have found big differences between methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-sensitive Staphylococcus aureus (MSSA) in cultivation in the presence of CFPZ, depending on time. When CFPZ is cleaved by penicillinase, a new SWV peak b appears at more positive potentials. This peak rises both with increasing concentration of enzyme and with cleavage time while the original CFPZ peak is simultaneously decreasing. We determined the concentration of CFPZ in the drug Pathozone by the standard addition method and achieved good agreement with the declared value of CFPZ in the drug. With a simple pretreatment procedure it is possible to determine CFPZ in milk; for urine no pretreatment was required. Using SWV we could detect CFPZ concentrations as low as 500 nmol L^–1 in bovine milk and human urine.     

Direct and simultaneous voltammetric analysis of heavy metals in tap water samples at Assiut city: an approach to improve the analysis time for nickel and cobalt determination at mercury film electrode

Tap water samples (Assiut city, lie in the middle north of upper Egypt, approx. 370 km from Cairo, January-March, 2002) were taken from the eight sampling sites of different locations at Assiut city. The samples are analyzed to determine the total content of cadmium, copper, lead and zinc by differential pulse anodic stripping voltammetry (DPASV) while nickel and cobalt are determined by a new simple differential pulse adsorptive stripping voltammetry (DPAdSV), using dimethylglyoxime (DMG) as the complexing agent. This method uses sodium sulfite as the supporting electrolyte, which facilitates the removal of oxygen interference without the traditional necessity of purging with inert gas. The effect of various parameters was studied using DPASV (for Cd, Pb, Cu and Zn) and AdSV (for Ni and Co) methods. Subsequently, under the so found experimental conditions, the stability of calibration curves and the detection limits (μg/l) have been determined. The data achieved (for all metals utility) are comparable to those measured by the graphite furnace atomic absorption spectrophotometric (GF-AAS) method. The effects of the interferences between these metal ions have been investigated. Moreover, the effect of storage was discussed and the obtained results were compared favorably with standard official methods. Statistical analysis of the database exhibits applicability and the accuracy of the techniques. The results obtained from the two techniques (Voltammetry and GF-AAS) are in very good agreements in the most tap water samples.     

Determination of linuron in soil by stripping voltammetry with a carbon fiber microelectrode

A carbon fiber microelectrode was used for the electroanalytical determination of Linuron (LIN) in soil extracts. The microelectrode was subjected to an electrochemical pretreatment in order to improve the herbicide adsorption on the electrode surface. With this preconcentration step, detection limits of 80 ng ml⁻¹ and determination limits of 260 ng ml⁻¹ were reached. Optimal conditions with respect to accumulation time and potential, scan rate and pH were established. The LIN was determined in a soil sample with the method proposed and the results found were comparable to those obtained by HPLC.     

中药片仔癀,六味地黄丸中的微量铬,铅和镉石墨炉原子吸收法测定

本文采用ＧＦ－ＡＡＳ加平台技术，基体改进剂，测定了中药片仔癀，六味地黄丸中铬、铅和镉的含量，铬、铅和镉的线性范围分别为０－０．８ｎｇ／ｍＬ，０－５０ｎｇ／ｍＬ，０－５ｎｇ／ｍＬ，回收率分别为１０２－１０３％，９９－１０１％，９７．５－９８％，本方法简便快速、准确。     

密封罐微波消化法序列ICP-AES测定环境试样中多元素

本文采用密闭罐微波消化方法快速分解生物、土壤、沉积物等环境样品。按样品性质,分别采用HNO3/H_2O_2或HNO_3/H_2O_2/HF在聚四氟乙稀密闭罐中于500W微波功率分解0.1～0.2g样品2～3min,溶液(或在其中加入10ml硼酸饱和溶液)稀释至2.5～5.0ml后,直接用序列ICP-AES法测定。方法准确度经分析6个生物、土壤、沉积物标准参考物质验证,10个元素的均值均与定值吻合。