Adoption of Common Schemes for Single and Sequential Extractions of Trace Metal in Soils and Sediments

Abstract

The various methods for determining the mode of occurrence of trace metals in sediments and soils have a long history which dates back to the determinations of the availability of metals for plant nutrition performed earlier. Various methods have been developed in the 70′s and 80′s dealing with both single and sequential extraction schemes. Although some schemes received wide acceptance, none of them developed into a commonly accepted procedure. As a result, the information obtained was site-specific and the interpretation of the results scientist-specific. The workshop on single and sequential extraction in sediments and soils held at Sitges     

泥炭中全氮的测定

采用连续流动化学分析仪（Continuous Flow Analyzer,CFA）,对泥炭中的全氮进行分析.方法有良好的线性关系（r=0.9999）,回收率为99％-105％,测试速度是比色法测试速度的15-20倍,操作简便、准确度好,对氮化学研究有一定意义.     

Methodik und Ergebnisse von Tracerexperimenten über katalytische Reaktionen von Kohlenwasserstoffen

Tracermethoden können wichtige Beiträge zur Aufklärung katalytischer Kohlenwasserstoffreaktionen liefern. In dieser Arbeit werden einige Ergebnisse mehrjähriger Untersuchungen mit ¹⁴C-markierten Verbindungen zusammenfassend dargestellt. Es wird speziell auf Benzenbildungsreaktionen bei der Leichtbenzin-Reformierung und auf Reaktionsmechanismen bei der Isomerísierung von C₈-Aromaten eingegangen.     

Schnell-Methode zur Umsetzung von Kohlenwasserstoffen zu Wasserstoff für die Isotopenanalyse

Es wird eine weiterentwickeltes, isotopenanalytisches Verfahren zur probenchemischen Umsetzung von Kohlenwasserstoffen mit Chromium zu Wasserstoff bei 1300 K vorgestellt. Die erzielten Testergebnisse zeigen anhand der gemessenen δD-Werte, daβ Quarzöfen bei diesen Temperaturen noch keine die Isotopenmeβwerte beeinflussende Diffusion von Wasserstoff durch die Wandung zulassen. Auβerdem erfolgte die Reaktion nahezu spontan und vollständig, was die Methode zeitlich sehr effektiv macht.

A modified isotope analytical method is presented for the chemical reaction of hydrocarbons with chromium at 1300 K to form hydrogen. The test results obtained (i.e. the measured δD-values) show that at this temperature quartz heating tubes do not allow hydrogen to diffuse through the wail, which fact would influence the isotopic composition. Furthermore the reaction proceeds nearly spontaneously and quantitatively, which yields an effective method, especially with respect to time.     

Anisotropic energy distribution of sputtered atoms induced by low energy heavy ion bombardment

The theory of anisotropic sputtering published in Phys. Rev. B 71(2), 026101 (2005) and Radiat. Effects Defects Solids 159(5), 301 (2004) has been modified and used to calculate the sputtering yield energy distributions for copper, tungsten, and aluminum targets bombarded by low-energy argon ion. As usual, the electronic stopping is ignored in the analysis. The present theory (modified Sigmund’s theory) has been shown to fit the corresponding experimental results of sputtering yield energy distributions well, except for the cases where the larger ion incident angle and larger sputtering emission angles were considered. The larger discrepancy between the present theory and the experimental result in the latter cases is probably due to the influence of direct recoil atoms on the energy spectrum. Compared with Falcone’s analytical theory, the present theory can reproduce much better experimental results of sputtering phenomena. The fact clearly demonstrates the intrinsic relation between the ion–energy dependence of the total sputtering yield and the sputtering yield energy distribution and suggests the great importance of momentum deposited on the target surface in the physical sputtering     

Radiation attenuation and nuclear properties of high density concrete made with steel aggregates

Abstract

The fast neutron and gamma ray spectra measured behind different thickness of steel scrap concrete with density of 4 g/cm³ have been studied. The mix proportions by weight of this type of concrete were 1 cement: 6.89 steel scrap: 2.9 sand and 0.5 Water. Comparison with a standard ordinary concrete of density 2.3 g/cm³ have been carried out. The measurements were made using a collimated beam of both gamma rays and neutrons emitted from one of the horizontal channel of the Egyptian Research Reactor-1. A fast neutron and gamma ray spectrometer with a stilbene crystal was used to measure the spectra of fast neutrons and gamma rays. Pulse shape discrimination using the zero cross over technique was used to separate the photon pulses from the electron pulses. The equation due to Schmidt has been modified and applied for determining the neutron effective removal cross sections (～_R) for steel scrap, ordinary, hematite–serpentine, ilmenite–limonite and ilmenite concretes. This equation gives results which are in good agreement with the measured values. The derived empirical equation in a previous work to calculate the neutron integral flux behind different thicknesses of different types of concretes, gives good results for steel scrap concrete under investigation comparing with the corresponding experimental data. Total neutron macroscopic cross sections, linear attenuation coefficients for gamma rays and the half-value layers for both radiations at different energies have been obtained for steel scrap concrete and comparing with the corresponding values of ordinary concrete. The results show that steel scrap concrete is better than ordinary, hematite–serpentine, ilmenite–limonite and ilmenite concretes from the radiation shielding point of view.     

Studies on crude oil‐water biphasic mixtures by low‐field NMR

Low‐field ¹H NMR was used in this work for the analysis of mixtures involving crude oils and water. CPMG experiments were performed to determine the transverse relaxation time (T₂) distribution curves, which were computed by the inverse Laplace transform of the echo decay data. The instrument's ability of quantifying water and petroleum in biphasic mixtures following different methodologies was tested. For mixtures between deionized water and petroleum, one achieved excellent results, with root mean squared error of cross‐validation (RMSECV) of 0.8% for a regression between the water content (wt %) and the relative area of the water peak in the T₂ distribution curve, or a standard deviation of 0.9% for the relationship between the water content and the relative water peak area, corrected by the relative hydrogen index of the crude. In the case of biphasic mixtures of Mn²⁺‐doped water and crude oils, the best result of RMSECV = 1.6% was achieved by using the raw magnetization decay data for a partial least squares regression. Copyright © 2012 John Wiley & Sons, Ltd.     

Identification of wild collected mosquito vectors of diseases using gas chromatography–mass spectrometry in Jazan Province,Saudi Arabia

Thirty‐three species of mosquitoes have been reported from the Kingdom of Saudi Arabia. Several of these mosquitoes, Anopheles gambiae Giles s.l., Anopheles stephensi Liston, Culex pipiens Linnaeus, Culex quinquefasciatus Say, Culex tritaeniorhynchus Giles, Stegomyia aegypti (Linnaeus) and Aedimorphus vexans arabiensis (Patton) are known vectors of human and animal diseases. In this study, the cuticular hydrocarbon profiles of eight mosquito species using gas chromatography–mass spectrometry were analyzed. Wild collected fourth‐instar larvae were reared, and single, newly emerged, unfed adult females were used for the analysis. A total of 146–160 peaks were detected from the cuticular extracts by gas chromatography. Repeated analysis of variance (ANOVA) and Tukey HSD Post Hoc test was used to test for quantitative differences in relative hydrocarbon quantity. In addition, a linear regression model was applied using Enter method to determine the diagnostic peaks for the eight mosquito specimens. The ANOVA test indicated that relative peaks were significant (P < 0.05) when selected pairs of peaks were compared. Also, seven compounds showed qualitative differences among the five mosquito vectors tested. The classes of constituents present were n‐alkanes, monomethylalkanes, dimethylalkanes, trimethylalkanes, alkenes, branched aromatic hydrocarbons, aldehydes and esters. These compounds have a carbon chain length ranging from 8 to 18 carbons. The most abundant compound in all adult mosquito specimens was n‐hexylacrylate [retention time (RT) 6.73 min], which was not detected in Cx. pipiens. In Cx. pipiens, the most abundant peak was benzaldehyde (RT 2.98 min). Gas chromatography–mass spectrometry is a suitable method to identify adult mosquitoes, especially from focal areas of public health concern such as Jazan Province, Saudi Arabia. This method allows a wide range of adult collected material to be identified with high accuracy. Copyright © 2013 John Wiley & Sons, Ltd.     

Adsorption of Polycyclic Aromatic Hydrocarbons on Graphene Oxides and Reduced Graphene Oxides

Graphene has attracted increasing attention in multidisciplinary studies because of its unique physical and chemical properties. Herein, the adsorption of polycyclic aromatic hydrocarbons (PAHs), such as naphthalene (NAP), anthracene (ANT), and pyrene (PYR), on reduced graphene oxides (rGOs) and graphene oxides (GOs) as a function of pH, humic acid (HA), and temperature were elucidated by means of a batch technique. For comparison, nonpolar and nonporous graphite were also employed in this study. The increasing of pH from 2 to 11 did not influence the adsorption of PAHs on rGOs, whereas the suppressed adsorption of NAP on rGOs was observed both in the presence of HA and under high‐temperature conditions. Adsorption isotherms of PAHs on rGOs were in accordance with the Polanyi–Dubinin–Ashtahhov (PDA) model, providing evidence that pore filling and flat surface adsorption were involved. The saturated adsorbed capacities (in mmol g^?1) of rGOs for PAHs calculated from the PDA model significantly decreased in the order of NAP>PYR>ANT, which was comparable to the results of theoretical calculations. The pore‐filling mechanism dominates the adsorption of NAP on rGOs, but the adsorption mechanisms of ANT and PYR on rGOs are flat surface adsorption.