Adoption of Common Schemes for Single and Sequential Extractions of Trace Metal in Soils and Sediments

Abstract

The various methods for determining the mode of occurrence of trace metals in sediments and soils have a long history which dates back to the determinations of the availability of metals for plant nutrition performed earlier. Various methods have been developed in the 70′s and 80′s dealing with both single and sequential extraction schemes. Although some schemes received wide acceptance, none of them developed into a commonly accepted procedure. As a result, the information obtained was site-specific and the interpretation of the results scientist-specific. The workshop on single and sequential extraction in sediments and soils held at Sitges     

泥炭中全氮的测定

采用连续流动化学分析仪（Continuous Flow Analyzer,CFA）,对泥炭中的全氮进行分析.方法有良好的线性关系（r=0.9999）,回收率为99％-105％,测试速度是比色法测试速度的15-20倍,操作简便、准确度好,对氮化学研究有一定意义.     

Methodik und Ergebnisse von Tracerexperimenten über katalytische Reaktionen von Kohlenwasserstoffen

Tracermethoden können wichtige Beiträge zur Aufklärung katalytischer Kohlenwasserstoffreaktionen liefern. In dieser Arbeit werden einige Ergebnisse mehrjähriger Untersuchungen mit ¹⁴C-markierten Verbindungen zusammenfassend dargestellt. Es wird speziell auf Benzenbildungsreaktionen bei der Leichtbenzin-Reformierung und auf Reaktionsmechanismen bei der Isomerísierung von C₈-Aromaten eingegangen.     

Schnell-Methode zur Umsetzung von Kohlenwasserstoffen zu Wasserstoff für die Isotopenanalyse

Es wird eine weiterentwickeltes, isotopenanalytisches Verfahren zur probenchemischen Umsetzung von Kohlenwasserstoffen mit Chromium zu Wasserstoff bei 1300 K vorgestellt. Die erzielten Testergebnisse zeigen anhand der gemessenen δD-Werte, daβ Quarzöfen bei diesen Temperaturen noch keine die Isotopenmeβwerte beeinflussende Diffusion von Wasserstoff durch die Wandung zulassen. Auβerdem erfolgte die Reaktion nahezu spontan und vollständig, was die Methode zeitlich sehr effektiv macht.

A modified isotope analytical method is presented for the chemical reaction of hydrocarbons with chromium at 1300 K to form hydrogen. The test results obtained (i.e. the measured δD-values) show that at this temperature quartz heating tubes do not allow hydrogen to diffuse through the wail, which fact would influence the isotopic composition. Furthermore the reaction proceeds nearly spontaneously and quantitatively, which yields an effective method, especially with respect to time.     

Anisotropic energy distribution of sputtered atoms induced by low energy heavy ion bombardment

The theory of anisotropic sputtering published in Phys. Rev. B 71(2), 026101 (2005) and Radiat. Effects Defects Solids 159(5), 301 (2004) has been modified and used to calculate the sputtering yield energy distributions for copper, tungsten, and aluminum targets bombarded by low-energy argon ion. As usual, the electronic stopping is ignored in the analysis. The present theory (modified Sigmund’s theory) has been shown to fit the corresponding experimental results of sputtering yield energy distributions well, except for the cases where the larger ion incident angle and larger sputtering emission angles were considered. The larger discrepancy between the present theory and the experimental result in the latter cases is probably due to the influence of direct recoil atoms on the energy spectrum. Compared with Falcone’s analytical theory, the present theory can reproduce much better experimental results of sputtering phenomena. The fact clearly demonstrates the intrinsic relation between the ion–energy dependence of the total sputtering yield and the sputtering yield energy distribution and suggests the great importance of momentum deposited on the target surface in the physical sputtering     

Radiation attenuation and nuclear properties of high density concrete made with steel aggregates

Abstract

The fast neutron and gamma ray spectra measured behind different thickness of steel scrap concrete with density of 4 g/cm³ have been studied. The mix proportions by weight of this type of concrete were 1 cement: 6.89 steel scrap: 2.9 sand and 0.5 Water. Comparison with a standard ordinary concrete of density 2.3 g/cm³ have been carried out. The measurements were made using a collimated beam of both gamma rays and neutrons emitted from one of the horizontal channel of the Egyptian Research Reactor-1. A fast neutron and gamma ray spectrometer with a stilbene crystal was used to measure the spectra of fast neutrons and gamma rays. Pulse shape discrimination using the zero cross over technique was used to separate the photon pulses from the electron pulses. The equation due to Schmidt has been modified and applied for determining the neutron effective removal cross sections (～_R) for steel scrap, ordinary, hematite–serpentine, ilmenite–limonite and ilmenite concretes. This equation gives results which are in good agreement with the measured values. The derived empirical equation in a previous work to calculate the neutron integral flux behind different thicknesses of different types of concretes, gives good results for steel scrap concrete under investigation comparing with the corresponding experimental data. Total neutron macroscopic cross sections, linear attenuation coefficients for gamma rays and the half-value layers for both radiations at different energies have been obtained for steel scrap concrete and comparing with the corresponding values of ordinary concrete. The results show that steel scrap concrete is better than ordinary, hematite–serpentine, ilmenite–limonite and ilmenite concretes from the radiation shielding point of view.     

二级热脱附-气相色谱-质谱联用测定大气可吸入颗粒物中的16种多环芳烃

建立了二级热脱附-气相色谱-质谱联用技术测定大气可吸入颗粒物PM10中16种多环芳烃的分析方法。对二级热脱附和色谱-质谱条件进行了优化。实验结果表明,方法的检出限为0.14～0.42 ng/m3,平均加标回收率为52.7%～97.9%,相对标准偏差(RSD)为8.0%～18.4%。与传统方法相比,该方法的样品前处理时间短、有机溶剂的使用量少,是对人体及环境友善的检测技术。该方法已应用于32份实际大气颗粒物样品的分析。     

Total synthesis of myceliothermophins A-E

Total synthesis of an antitumor compound myceliothermophin A and related compounds based on a convergent synthetic strategy was investigated. A common decalin skeleton of myceliothermophins was stereoselectively constructed by an IMDA reaction. The fully elaborated precursor of myceliothermophins was obtained via aldol reaction of N-protected γ-methoxylactam with decalin aldehyde. By using Teoc group for the protection of nitrogen atom of lactam ring, selective deprotection prior to the hydrolysis of methoxyaminal moiety was successfully achieved to obtain γ-methoxylactams (myceliothermophins C and D). Subsequent hydrolysis of these compounds afforded the corresponding γ-hydroxylactam, and myceliothermophins A and B in high yield. Myceliothermophin E was also synthesized by dehydration of the obtained γ-hydroxylactams. The absolute configurations of myceliothermophins A-E were also successfully determined.