反胶束笼对纳米氯化银反应性能的微环境限定

研究了反映束中直径为１０￣１７ｎｍ的ＡｇＣｌ微料与亚甲基蓝之间的作用，比较了阴离子型和非离子型表面活性剂组成的反胶束微环境的影响，讨论了亚甲基蓝在粒子上的吸附，二聚体形成的钠米ＡｇＣｌ粒子对亚甲基蓝荧光猝灭机制。     

聚芳醚亚砜的合成与表征

以二苯醚和二氯亚砜为主要单体 ,在无水AlCl3/CH2 ClCH2 Cl/NMP催化剂溶剂体系中进行低温溶液共聚 ,合成聚芳醚亚砜 (PPOS) ,研究了AlCl3/NMP用量及单体摩尔比对聚合反应的影响 .用IR、DSC、TG和X ray等对PPOS进行结构和性能的分析与表征 ,研究结果表明 :PPOS属无定形聚合物 ,具有较高的玻璃化转变温度 (Tg) ,软化温度在 2 6 0℃左右 ,在加热过程中出现二个热分解温度     

Study on the new fluorescence enhancement system of Tb-1,10-bis(2′-carboxylphenyl)-1,4,7,10-tetraoxadecane in silver chloride collosol and its analytical application

A new salicylic-based open-chain crown ether ligand, 1,10-bis(2′-carboxylphenyl)-1,4,7,10-tetraoxadecane (BCPTD) was synthesized. Solutions of its complex with Tb³⁺ can emit the intrinsic fluorescence of Tb³⁺. The fluorescence intensity of the complex in KCl solution was enhanced by the addition of silver(I), leading to a new fluorescence enhancement phenomenon. The spectrofluorimetric determination of traces of silver(I) based on the above phenomenon was carried out. The excitation and emission wavelengths are 298 and 545 nm, respectively. Under optimal conditions, the differential value of fluorescence intensity in the absence and presence of Ag⁺ was proportional to the concentration of silver(I) in the range 0.5-20 μg ml⁻¹. The method was applied to the determination of silver(I) in a standard ore sample. The analytical performance is investigated in detail by using common aromatic carboxylic acids or synthetic analogues of BCPTD as ligands to replace BCPTD. It was found that Tb-aromatic acid complexes did not result in fluorescence enhancement of Tb³⁺ in AgCl collosol. The phenomenon was only observed in Tb(III) with BCPTD or its open-chain crown ether analogues solutions.In addition, the enhancement of the fluorescence intensity of terbium(III) in these complexes depends on the extent of formation of the AgCl collosol.     

AFM of adsorbed polyelectrolytes on cellulose I surfaces spin-coated on silicon wafers

Thin layers of cellulose I nanocrystals were spin-coated onto silicon wafers to give a flat model cellulose surface. A mild heat treatment was required to stabilize the cellulose layer. Interactions of this surface with polyelectrolyte layers and multilayers were probed by atomic force microscopy in water and dilute salt solutions. Deflection–distance curves for standard silicon nitride tips were measured for silicon, cellulose-coated silicon, and for polyelectrolytes adsorbed on the cellulose surface. Transfer of polymer to the tip was checked by running deflection–distance curves against clean silicon. Deflection–distance curves were relatively insensitive to adsorbed polyelectrolyte, but salt addition caused transfer of cationic polyelectrolyte to the tip, and swelling of the polyelectrolyte multilayers.     

A new strategy for the synthesis of α,β-diaroylpropionates promoted by samarium metal in DMF

When promoted by samarium in DMF, aroyl chlorides react readily with acrylates to afford α,β-diaroylpropionates in good to excellent yields without pretreating or activating the metallic samarium.     

取代乙酸配体对乙炔二聚反应催化剂性能的影响

研究了取代乙酸配体作为Ｎｉｅｕｌａｎ催化剂对乙炔二聚反应性能的影响。结果表明，不同功能结构数目的影响，结果表明，不同功能结构数目的的氨羧配体均使催化剂的选择性提高。乙炔转化率略有下降，巯基乙酸配体的加入，则改变了乙炔二聚反应的机理，得到以乙醛为主的产物。     

The influence of core-shell structured modifiers on the toughness of poly (vinyl chloride)

The core-shell structured grafted copolymer particles of polybutadiene grafted polymethyl methacrylate (PB-g-PMMA, MB) were prepared by emulsion polymerization. The MB particles were used to modify poly (vinyl chloride) (PVC) by melt blending. The mechanical properties of the PVC blends were investigated. The micro-morphology of the PVC blends was observed by scanning electron microscopy (SEM). The results indicated that the samples with the best impact strength could be obtained when the core-shell weight ratio of PB to PMMA is lower than 93:7, the mechanical properties correlated well with SEM morphologies, the addition of modifier with the ratio core to shell of 93:7 could reduce the domain size of the dispersed phase. Furthermore, the compatibility and properties of the blends were greatly enhanced and improved. The modifier particles could be well dispersed in the PVC matrix.     

氯化1-乙基-3-甲基烷基咪唑分子结构及其氢键作用能的密度泛函研究

采用量子化学密度范函方法计算研究了氯化1-乙基-3-甲基咪唑盐（[EMIM]C1）正负离子间相互作用的平衡构型和Cl^-离子从不同方位与咪唑阳离子的结合能．计算发现Cl^-可在咪唑环平面上结合形成离子键，其结合能为．368．97kJ／mol，还可与环上的三个H原子形成氢键，其氢键键长和结合能分别为0．2000nm／-378．03kJ／mol、0．2339nm／-344，69kJ／mol和0．2301nm／-346，01kJ／mol．结合能包括氢键作用能和正负离子的静电作用能，后者为主要贡献．从理论上展示了该离子液体的氢键结构．