改进型甲醇合成催化剂NC208的催化特性

采用ＴＰＤ、ＸＲＤ、ＢＥＴ和Ｈ２Ｓ中毒试验等方法，对比研究三组份（Ｃｕ－Ｚｎ－Ａｌ）甲醇合成催化剂Ｃ２０７和添加少量金属氧化物的改进型催化剂ＮＣ２０８．结果表明，工作态ＮＣ２０８催化剂表面Ｃｕ＋／Ｃｕ０的比值和价态稳定性大于Ｃ２０７．     

Surface functionalization of polymer latex particles. II. Catalytic oxidation of poly(methylstyrene) latexes in the presence of cetyltrimethylammonium bromide

Surface-functionalized cationic poly(methylstyrene) (PMS) latex particles containing aldehyde and carboxylic acid groups were successfully achieved via an emulsion polymerization of 3(4)-methylstyrene in the presence of cetyltrimethylammonium bromide, followed by an in-situ oxidation catalyzed by copper chloride and tert-butyl hydroperoxide (t-BuOOH). Factors such as the type of metal catalyst, oxidant, and their concentration strongly affected the rate of oxidation. Step addition of t-BuOOH resulted in both a higher degree of oxidation and a more uniform distribution of particle size of the functionalized PMS as compared to the batch addition method. The effect of organic solvent was found to be insignificant, and the oxidation could still proceed in its absence. The particle sizes increased significantly during the oxidation but could be controlled by using crosslinked PMS latexes. Finally, the versatility of this oxidation process was demonstrated by oxidation of the polymer with a solid loading as high as 28%. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3585–3593, 1997     

One-Pot Facile Synthesis of Noble Metal Nanoparticles Supported on rGO with Enhanced Catalytic Performance for 4-Nitrophenol Reduction

In this study, reduced graphene oxide (rGO)-supported noble metal (gold, silver, and platinum) nanoparticle catalysts were prepared via the one-pot facile co-reduction technique. Various measurement techniques were used to investigate the structures and properties of the catalysts. The relative intensity ratios of I_D/I_G in rGO/Au, rGO/Ag, rGO/Pt, and GO were 1.106, 1.078, 1.047, and 0.863, respectively. The results showed the formation of rGO and that noble metal nanoparticles were decorated on rGO. Furthermore, the catalytic activities of the designed nanocomposites were investigated via 4-nitrophenol. The catalysts were used in 4-nitrophenol reduction. The catalytic performance of the catalysts was evaluated using the apparent rate constant k values. The k value of rGO/Au was 0.618 min⁻¹, which was higher than those of rGO/Ag (0.55 min⁻¹) and rGO/Pt (0.038 min⁻¹). The result proved that the rGO/Au catalyst exhibited a higher catalytic performance than the rGO/Ag catalyst and the rGO/Pt catalyst. The results provide a facile method for the synthesis of rGO-supported nanomaterials in catalysis.     

对烷基苯甲酸的催化加氢及其取代基效应

对烷基环己烷羧酸;对烷基苯甲酸的催化加氢及其取代基效应     

氨-碘酸盐介质中白喉类毒素的平行催化氢波

在 0 .4mol/LNH3 NH4Cl (pH 8.3 1 )介质中 ,白喉类毒素 (DT)于 - 1 .89V(vs.SCE)处产生的极谱催化氢波可被碘酸钾进一步催化 ,峰电流明显增大 ,但峰电位不变 ,产生一种氢的新动力波 ,建议称其为平行催化氢波。在 0 .4mol/LNH3 NH4Cl(pH 8.3 1 ) - 5 .0× 1 0 - 3 mol/LKIO3介质中 ,DT平行催化氢波的二阶导数峰电流与其浓度在 0 .2 μg/mL～ 1 .0 μg/mL内呈线性关系 ,可用于生物制品中DT含量的测定。     

Recent Progress in Direct Partial Oxidation of Methane to Methanol

The direct conversion of methane to methanol has attracted a great deal of attention for nearly a century since it was first found possible in 1902, and it is still a challenging task. This review article describes recent advancements in the direct partial oxidation of methane to methanol. The history of direct oxidation of methane and the difficulties encountered in the partial oxidation of methane to methanol are briefly summarized. Recently reported developments in gas-phase homogeneous oxidation, heterogeneous catalytic oxidation and liquid phase homogeneous catalytic oxidation of methane axe reviewed.     

Effect of Drying Methods on the Structure and Combustion Activity of Mn—Substituted Hexaaluminate Catalysts

Conventional oven drying (COD) and supercritical drying (SCD) methods were applied to the preparation of Mn-substituted hexaaluminate (BaMnA111O19-α) catalysts. The effect of drying methods on phase composition, specific surface area, pore structure, reduction behavior of Mn^3 ions, and combus-tion activity of the samples was investigated. The homogenous mixing of the components in the sol-gel process could be maintained by SCD, and the hexaaluminate phase was almost the only phase of the resulting materials after calcination. H2-TPR revealed that the Mn^3 ions in the sample obtained by SCD were easier to be reduced than that by COD. Moreover, the samples obtained by SCD have higher surface area, narrower pore size distribution, and higher combustion activity than those obtained by COD.     

催化不对称Michalel加成反应的新进展

总结了近年催化不对称Michael加成反应的新方法，包括手性金属络合物催化 的反应，呈手性Lewis酸性的手性金属络合物促进的不对称加成，手性冠醚络合物 催化的反应及其它催化反应。     

Studies on the Performance and Structure of Supported Catalysts for the Partial Oxidation of Methane to Syngas

The catalytic properties of several supported metal catalysts on different carriers were studied in the partial oxidation of methane (POM) to syngas. In our experiment, supported noble metal catalysts exhibited better performance than the other supported transition metal catalysts. The catalyst performances were significantly influenced by the d-electron configuration of the active metal components and the dispersion of active metal components on the support. A catalyst with a moderate number of unpaired electrons in the d-orbital of the active metal support without obvious acidity or redox activity (e.g. MgO) was suitable for POM performance. The Rh/SiO2 catalyst was the best in the POM reaction, among those investigated. Reaction conditions apparently also affected the POM performance of the catalyst. The conversion of methane and the selectivity for CO increased with the reaction temperature, and a high CH4/O2 ratio was not beneficial for POM performance.