Multi-component reactions between 2-aminopyrimidine, aldehydes and isonitriles: the use of a nonpolar solvent suppresses formation of multiple products

A reliable and convenient protocol for MCRs between 2-aminopyrimidine, aldehydes and isonitriles is described. Toluene was chosen as the reaction solvent based on mechanistic reasoning. The product mixtures were found to contain a single imidazo[1,2-a]pyrimidine product in each case, which were isolated and purified by precipitation and crystallization. Chromatographic recovery from filtrates raised the total yields to 49-66%. The procedure provides a practical alternative to hitherto reported methods in which formation of multiple products was observed.     

Solubility of polycyclic aromatics in binary solvent mixtures using activity coefficient models

Polycyclic aromatic hydrocarbons (PAHs) precipitation is one of the major problems in the hydrocracking units. In this investigation, pyrene and phenanthrene were selected because they were found to be in higher concentrations in the feed to hydrocracking units. Their solubilities were investigated in toluene solvent mixture of iso-octane and heptane over a temperature range from 293 to 323 K. The experimental solubility data were used to predict the interaction parameters for seven different solid–liquid equilibrium models. The following activity coefficient models were used; Wilson, NIBS/Redlich–Kister, UNIQUAC, modified UNIFAC, modified UNIFAC (Dortmund), Flory–Huggins and Sheng. The interaction parameters were expressed as a second-order polynomial function in temperature. In order to test the models, the average absolute deviation percentage (AADP) was used. The overall AADP was found to range from approximately 7 to 14%. The models can be arranged according to their accuracy in a descending order based on AADP as follows: NIBS/Redlich–Kister, Wilson, UNIQUAC, Sheng, Flory–Huggins, modified UNIFAC (Dortmund) and finally modified UNIFAC. All models used in this work gave reasonable results; however, the group contribution models can also be used as a predictive tool for the solubility measurement of pyrene and phenanthrene in other solvents containing the same groups of the solvents used in this study.     

Phase equilibrium measurements of (methane + benzene) and (methane + methylbenzene) at temperatures from (188 to 348) K and pressures to 13 MPa

New isothermal pTxy data are reported for (methane + benzene) and (methane + methylbenzene (toluene)) at pressures up to 13 MPa over the temperature range (188 to 313) K using a custom-built (vapor + liquid) equilibrium (VLE) apparatus. The aim of this work was to investigate literature data inconsistencies and to extend the measurements to lower temperatures. For (methane (1) + benzene (2)), measurements were made along six isotherms from (233 to 348) K at pressures to 9.6 MPa. At temperatures below 279 K there was evidence of a solid phase, and thus only vapor phase samples were analyzed at these temperatures. For the (methane (1) + methylbenzene (3)) system, measurements were made along seven isotherms from T = (188 to 313) K at pressures up to 13 MPa. Along the 198 K isotherm, a significant change in the data’s p,x slope was observed indicating (liquid + liquid) equilibria at higher pressures. The data were compared with literature data and with calculations made using the Peng–Robinson (PR) equation of state (EOS). For both binary systems our data agree with much of the literature data that also deviate from the EOS in a similar manner. However, the data of Elbishlawi and Spencer (1951) for both binary systems, which appear to have received an equal weighting to other data in the EOS development, are inconsistent with the results of our measurements and data from other literature sources.     

Theoretical Investigation on Photoionization and Dissociative Photoionization of Toluene

The photoionization and dissociation photoionization of toluene have been studied using quantum chemistry methods.The geometries and frequencies of the reactants,transition states and products have been performed at B3LYP/6-311++G (d,p) level,and single-point energy calculations for all the stationary points were carried out at DFT calculations of the optimized structures with the G3B3 level.The ionization energies of toluene and the appearance energies for major fragment ions,C₇H₇⁺,C₆H₅⁺,C₅H₆⁺,C₅H₅⁺,are determined to be 8.90,11.15 or 11.03,12.72,13.69,16.28 eV,respectively,which are all in good agreement with published experimental data.With the help of available published experimental data and theoretical results,four dissociative photoionization channels have been proposed:C₇H₇⁺+H,C₆H₅⁺+CH₃,C₅H₆⁺+C₂H₂,C₅H₅⁺+C₂H₂+H.Transition structures and intermediates for those isomerization processes are determined in this work.Especially,the structures of C₅H₆⁺ and C₅H₅⁺ produced by dissociative photoionization of toluene have been defined as chain structure in this work with theoretical calculations.     

Refractive index of benzene and methyl derivatives: temperature and wavelength dependencies

Measurements of the refractive index from 288 to 318 K at five fixed wavelengths, from 656.3 to 404.7 nm, are reported for benzene, toluene (methylbenzene), o-xylene (1,2-dimethylbenzene), m-xylene (1,3-dimethylbenzene), and p-xylene (1,4-dimethylbenzene). We also report the temperature and wavelength dependencies of the refractive index obtained from a least-squares routine. The agreement between the measured and calculated refractive indices lies within the experimental uncertainty.     

Quaternary (liquid + liquid) equilibrium data for the extraction of toluene from alkanes using the ionic liquid [EMim][MSO4]

(Liquid + liquid) equilibrium (LLE) studies for the extraction of aromatics from alkanes present in the petroleum fractions are important to develop theoretical/semiempirical (liquid + liquid) equilibrium models, which are used in the design of extraction processes. In this work, the ionic liquid 1-ethyl-3-methylimidazolium methylsulfate, [EMim][MSO₄], was evaluated as potential solvent for the separation of toluene from heptane and cyclohexane. The LLE data for the quaternary system {heptane (1) + cyclohexane (2) + toluene (3) + [EMim][MSO₄] (4)} were experimentally determined at T = 298.15 K and atmospheric pressure. Moreover, the LLE data for the ternary systems {heptane or cyclohexane (1) + toluene (2) + [EMim][MSO₄] (3)} were also determined. Solute distribution ratios and selectivities were calculated and analysed in order to evaluate the capability of the ionic liquid to accomplish the separation target. A comparison between the solute distribution ratios and selectivities for the quaternary and the ternary systems was also made. Finally, the experimental tie-line data were correlated with the NRTL model.     

Biodegradation analyses of trichloroethylene (TCE) by bacteria and its use for biosensing of TCE

Trichloroethylene (TCE) is a toxic, recalcitrant groundwater pollutant. TCE-degrading microorganisms were isolated from various environments. The aerobic bacteria isolated from toluene- and tryptophan-containing media were Pseudomonas sp. strain ASA86 and Burkholderia sp. strain TAM17, respectively; these are necessary for inducing TCE biodegradation in a selective medium. The half-degradation time of TCE to a concentration of 1 mg/L was 18 h for strain ASA86 and 7 days for strain TAM17. While identifying toluene/TCE degradation genes, we found that in strain ASA86, the gene was the same as the todC1 gene product encoding toluene dioxygenase identified in Pseudomonas putida F1, and that in strain TAM17, the gene was similar to the tecA1 gene product encoding chlorobenzene dioxygenase identified in Burkholderia sp. PS12. A novel TCE biosensor was developed using strain ASA86 as the inducer of toluene under aerobic conditions. The TCE biosensor exhibited a linear relationship below 3 ppm TCE. Detection limit of the biosensor was 0.05 ppm TCE. The response time of the biosensor was less than 10 min. The biosensor response displayed a constant level during a 2 day period. The TCE biosensor displayed sufficient sensitivity for monitoring TCE in environmental systems.     

A simplified Quick, Easy, Cheap, Effective, Rugged and Safe approach for the determination of trihalomethanes and benzene, toluene, ethylbenzene and xylenes in soil matrices by fast gas chromatography with mass spectrometry detection

A method based on simplified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) extraction followed by large-injection volume-fast gas chromatography and mass spectrometry detection has been developed for the determination of trihalomethanes (chloroform, bromodichloromethane, dibromochloromethane and bromoform) and BTEX (benzene, toluene, ethylbenzene and xylenes) in soil samples.The simplified version of QuEChERS used meets the requirements of the “green chemistry” and provides reliable results with high sample throughput, low solvent consumption, little labour and the use of materials commonly employed in laboratories. The GC device used is equipped with a programmable temperature vaporizer (PTV), with a liner packed with Tenax-TA^®. Using the solvent-vent mode, the PTV allows the injection of large volumes of sample, affording an improvement in the sensitivity of the method. The chromatographic conditions used here allowed the separation of the compounds in less than 5.50 min. Good linearity was obtained for all the target compounds, with highly satisfactory repeatability and reproducibility values. The limits of detection were in the 0.2 to 15 μg kg⁻¹ range. The method was validated by the analysis of two certified reference materials.     

THE ADSORPTION BEHAVIORS OF TOLUENE ON HYPERCROSSLINKED RESINS

1. INTRODUCTION Toluene has been widely used for many industrial purposes. Owing to their toxicity and recalcitrance, the presence of toluene in the natural environment, especially in the groundwater, has been a great concern. The removal of toluene is of…     

Contribution of UV light to the decomposition of toluene in dielectric barrier discharge plasma/photocatalysis system

The contribution of UV light from plasma and an external UV lamp to the decomposition of toluene in a dielectric barrier discharge (DBD) plasma/UV system, as well as in a plasma/photocatalysis system was investigated. It was found that UV light from the DBD reactor was very weak. Its contribution to the removal of toluene in the plasma/photocatalysis system could be ignored. Whereas, the introduction of external UV light to the plasma significantly improves the removal efficiency of toluene by 20%. The removal efficiency of toluene in the plasma/photocatalysis system increased about 22% and 16% when compared with a plasma only system and plasma driven photocatalyst system, respectively. The increased toluene removal efficiency was mostly attributed to the contribution of the synergy between plasma and UV light, but not to the synergy between plasma and photocatalysis. The synergetic effect between plasma and photocatalysis was not significant.