Determination of Paint Solvents by Vapour Phase Fourier Transform Infrared Spectrometry.

A fast procedure has been developed for the direct determination of paint solvents. The method is based on the injection of small volumes of untreated solvent mixtures into a heated Pyrex glass reactor in which the sample is volatilized and introduced by means of a flow of nitrogen into an IR multiple pass gas cell and the spectrum in the mid-IR region is registered as a function of time. Data found for samples are interpolated in calibration graphs obtained by injecting different volumes of pure compounds which constitute the solvent mixture. A methylisobutylketone (MIBK) toluene mixture was used as test system to develop the proposed procedure. The method provides a limit of detection of the order of 1–4 μg, a relative standard deviation of the order of 0.4 to 2% for five independent measurements, and recovery percentage values from 99.8 till 103.6 %. A commercial sample of polyurethane paint solvent has been analysed by the developed procedure.     

Metal-containing polyurethanes from tetradentate Schiff bases: synthesis,characterization, and biocidal activities

N,N′-bis(salicylidene)thiosemicarbazide Schiff base has been synthesized by the reaction of thiosemicarbazide with salicylaldehyde and then reacted with formaldehyde to generate phenolic groups, resulting in the formation of Schiff-base monomeric ligand. It was further incorporated with transition metals, Mn⁺², Co⁺², Ni⁺², Cu⁺², and Zn⁺², to form Schiff-base metal complex, which was then polymerized with toluene 2,4-diisocyanate to form metal-chelated polyurethanes. Monomeric ligand, its metal complexes, and its metal polychelates were characterized and compared by elemental analysis, FT-IR, ¹H NMR, thermal, and biocidal activities to evaluate the enhancement in physical and chemical properties on coordination with metal and on polymerization. SEM images of ligand and polymer metal complexes showed changes in surface morphology, while electronic spectra of polymer metal complexes were used to predict the geometry. Antimicrobial activities were determined by using agar-diffusion method with Staphylococcus aureus, Escherichia coli, Bacillus subtilis (bacteria), Aspergillus niger, Candida albicans, and Aspergillus flavus (yeast). The polymeric ligand had varied antibacterial and antifungal activities, enhanced after chelation and polymerization. Comparative results show that coordination of metal to the ligand enhances its physical and chemical properties which were meliorated on polymerization.     

Development of a manual method for the determination of mineral oil in foods and paperboard

So far the majority of the measurements of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) were obtained from on-line high performance liquid chromatography–gas chromatography–flame ionization detection (on-line HPLC–GC–FID). Since this technique is not available in many laboratories, an alternative method with more easily available tools has been developed. Preseparation on a small conventional liquid chromatographic column was optimized to achieve robust separation between the MOSH and the MOAH, but also to keep out the wax esters from the MOAH fraction. This was achieved by mixing a small portion of silica gel with silver nitrate into highly activated silica gel and by adding toluene into the eluent for the MOAH. Toluene was also added to the MOSH fraction to facilitate reconcentration and to serve as a keeper preventing loss of volatiles during solvent evaporation. A 50 μl volume was injected on-column into GC–FID to achieve a detection limit for MOSH and MOAH below 1 mg/kg in most foods.     

Trace gas detection of benzene,toluene, p-, m- and o-xylene with a compact measurement system using cantilever enhanced photoacoustic spectroscopy and optical parametric oscillator

A compact measurement system based on a novel combination of cantilever enhanced photoacoustic spectroscopy (CEPAS) and optical parametric oscillator (OPO) was applied to the gas phase measurement of benzene, toluene, and o-, m- and p-xylene (BTX) traces. The OPO had a band width (FWHM) of 1.3 nm, was tuned from 3237 to 3296 nm in steps of 0.1 nm and so spectra of BTX at different concentrations were recorded. The power emitted by the OPO increased from 88 mW at 3237 nm to 103 mW at 3296 nm. The univariate detection limits (3σ, 0.951 s) for benzene, toluene, p-, m- and o-xylene at 3288 nm were 12.0, 9.8, 13.2, 10.1 and 16.0 ppb, respectively. Multivariate data analysis using science-based calibration was used to resolve the interference of the analytes. The multivariate detection limits (3σ, 3237–3296 nm, 591 spectral points each 0.951 s) for benzene, toluene, p-, m- and o-xylene in the multi-compound sample, where all other analytes and water interfere were 4.3, 7.4, 11.0, 12.5 and 6.2 ppb, respectively. Without interferents, the multivariate detection limits varied between 0.5 and 0.6 ppb. The sum of the cross-selectivities (3237–3296 nm, 591 spectral points, each 0.951 s) per analyte were below 0.05 ppb/ppb, with an average of 0.038 ppb/ppb. The cross-selectivity of water to the analytes was on average 1.22 × 10⁻⁴ ppb/ppb. The OPO is small in size (L × W × H 125 × 70 × 45 mm), commercially available, and easy to operate and integrate to setups. The combination with sensitive CEPAS enables compact measurement systems for industrial as well as environmental trace gas monitoring.     

适用于汽油参比燃料TRF的多环芳香烃生成机理

构造了一个包括287种组分和1569个反应的汽油参比燃料TRF(toluene reference fuel)燃烧过程中多环芳香烃(PAHs)生成机理的详细化学反应动力学模型,引入四种PAH生长路径将多环芳香烃的生成机理发展到芘A4(C20H12)水平,并通过对PAH产率的分析,指出乙炔(C2H2)、丙炔(C3H3)、乙烯基乙炔(C4H4)以及含有奇数碳原子的环戊二烯自由基(C5H5)和茚基(C9H7)等物质对PAHs生成和生长起到重要作用.该机理可以较准确计算基础燃料(PRF)和TRF火焰的着火延迟期、燃烧火焰中小分子(PAH前驱体C2H2、C3H4等)和PAHs的物质浓度.通过与实验数据的比较表明,该机理在不同温度、压力、化学计量比下具有较好的性能.由此分析,该机理对碳烟前驱物PAHs的预测性能是可靠的.     

SnO_2/TiO_2纳米管复合光催化剂的性能及失活再生

基于微波水热法和微乳液法合成SnO2/TiO2纳米管复合光催化剂.通过X射线衍射(XRD)、配有能量色散X射线光谱仪(EDX)的透射电镜(TEM)和电化学手段对光催化剂进行表征.以甲苯为模型污染物,考察光催化剂在紫外光(UV)和真空远紫外光(VUV)下的性能及失活再生.结果表明,SnO2/TiO2纳米管复合光催化剂形成三元异质结(锐钛矿相TiO2(A-TiO2)/金红石相TiO2(R-TiO2)、A-TiO2/SnO2和R-TiO2/SnO2异质结),促使光生电子-空穴对的有效分离,提高光催化活性.SnO2/TiO2表现出最佳的光催化性能,UV和VUV条件下的甲苯降解率均达100%,CO2生成速率(k2)均为P25的3倍左右.但由于UV光照矿化能力不足,中间产物易在催化剂表面累积.随着UV光照时间的增加,SnO2/TiO2逐渐失活,20 h后k2由138.5 mg·m-3·h-1下降到76.1 mg·m-3·h-1.利用VUV再生失活的SnO2/TiO2,过程中产生的·OH、O2-·、O(1D)、O(3P)、O3等活性物质可氧化吸附于催化剂活性位的难降解中间产物,使催化剂得以再生,12 h后k2恢复到143.6 mg·m-3·h-1.UV和VUV的协同效应使UV降解耦合VUV再生成为一种可持续的光催化降解污染物模式.     

碱活化多孔碳用于分离甲苯及活化/吸附机理

采用生物质木质素磺酸钠(SLS)为碳源, 先与硬模板NaCl混合预碳化, 再加入活化剂NaOH在氮气保护下升温至850 ℃碳化, 得到SLS基碱活化的多孔碳吸附剂(SPCN). 将SPCN用于吸附液体石蜡中芳香烃甲苯, 对比研究了不同活化剂加入量对SPCN结构、 性质及吸附效果的影响. 结果表明, SPCN表面具有丰富的官能团和发达的微/介孔结构, 活化剂加入量对比表面积的影响为先增大后减小, 碱/碳质量比为1∶1时比表面积达到最大值(710.4 m ²/g); 吸附量与比表面积呈正相关, 样品SPCN-1的最大吸附量为2875.17 mg/g, 远高于商业吸附剂, 经5次吸附-解吸循环后仍保持92.5%的吸附效率. 探究了活化机理, NaOH、 碳质和气体发生氧化还原反应释放气体留下孔隙, 经充分酸洗、 水洗后得到永久孔道. 最后, 结合扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 拉曼光谱(Raman)、 X射线衍射(XRD)、 傅里叶变换红外光谱(FTIR)和比表面积分析等结果证明了吸附机理主要是孔隙填充效应、 范德华力、 π-π相互作用及电子供/受体作用的共同作用. 首次报道了SPCN应用的新方向并探究了活化与吸附机理, 制备方法简易、 经济, 产品循环稳定性好、 无污染, 有望用于工业化生产.     

Enhancement of the catalytic performances and lifetime of Ni/γ-Al2O3 catalysts for the steam toluene reforming via the combination of dopants: inspection of Cu,Co, Fe,Mn, and Mo species addition

In this work, the influence of metallic dopant addition in 10 wt % Ni/γ-Al₂O₃ catalyst on the material physico-chemical properties and catalytic activity for the toluene steam reforming was studied. Seventeen doped Ni/γ-Al₂O₃ catalysts were synthesized by the sol–gel process. The aim of this study was to determine which elements were the most suitable for the doping of 10 wt % Ni/γ-Al₂O₃ catalysts. The influence of the dopants was studied through different physico-chemical techniques. It appeared that some dopants showed lower catalytic performances due to high carbon deactivation. On the contrary, some dopants increased the resistance to coking while also improving the catalytic activity. Different mechanisms were proposed to explain these modifications of catalytic behavior. Among all doped Ni/γ-Al₂O₃ catalysts, the samples that combined Mn + Mo or Co + Mo dopants showed the best catalytic performances at 650 °C. Both samples showed high toluene reforming activity and low amounts of carbon deposit.     

DIBUTYLTIN DILAURATE-CATALYZED DIISOCYANATE COUPLING- GRAFTING OF POLY(ETHYLENE GLYCOL) ONTO NANO-SILICA SURFACE THROUGH A ONE-STEP PROCEDURE

Grafting polymer glycols onto nano-silica surface through one-step procedure was investigated. The major characteristic of this procedure is that all the materials and reagents (silica, PEG, TDI, DBTDL, solvent) required for grafting were added simultaneously into the reaction vessel. TDI and DBTDL were used as coupling agent and catalyst, respectively.The products were characterized by FTIR, TGA, elemental analyses and TEM, giving evidence for successful grafting of PEG. Possible mechanism of this grafting was studied and two grafting processes were proposed. The process through which the grafting proceeds depends on the reaction temperature. Effect of molecular weight of PEG on grafting was also investigated.     

Air sampling of aromatic hydrocarbons in the presence of ozone by solid-phase microextraction

Effects of ozone on air sampling of standard gas mixtures of aromatic hydrocarbons were tested using solid-phase microextraction (SPME). Standard concentrations of ozone ranging from 10 ppb (v/v) to 6400 ppm (v/v) were generated using an in-house built ozone generator based on corona discharge. Effects of temperature, discharge voltage, and oxygen flow on the ozone generation were tested. The working dc voltage had the greatest effect on generated ozone concentration and was proportional to the ozone concentration. Generation temperature and oxygen flow rate were inversely proportional to ozone concentrations. Produced ozone was mixed with standard benzene, toluene, ethylbenzene, and xylenes (BTEX) gas at less than 100 ppb (v/v). Air samples were collected with poly(dimethylsiloxane) (PDMS) 100 microm SPME fibers and analyzed by gas chromatography (GC)-flame ionization detection (FID) and GC-MS. Significant reductions of BTEX concentrations were observed. In addition, some products of BTEX-ozone-oxygen reactions were identified. SPME worked well as a rapid sampler for BTEX and BTEX-ozone-oxygen reaction products. No significant deterioration of the PDMS coating and no significant reduction of absorption capacity were observed after repeated exposure to ozone.